Bilal M.
Verified
CUT pad cleared water spots and light swirls on my sedan in one section pass. Compound usage is lower than with foam too.
Lake Country Microfibre Pad: Finishing 3 Inch
R 250.00
- Microfibre face for aggressive cut and gloss
- CUT and OSP variants for correction and finishing
- Multiple sizes fit 15mm to 21mm DA polishers
- Compatible with any quality liquid or compound
- Microfibre face cuts swirls faster than foam
- OSP variant corrects and refines in one stage
- Multiple sizes for panels, doors and mini sections
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,815.00
Real cutting power
Microfibre that works as hard as you do
Lake Country Microfiber Pads bring the higher abrasion of a microfibre face to your DA polisher, letting you tackle heavy swirls and oxidation without the extra passes that foam correction often demands. The CUT pad handles serious defect removal while the OSP pad gives you correction and gloss refinement in a single stage.
Why microfibre
More cut, more control
Four reasons detailers reach for the microfibre pad first.
-
Higher cut rate
Microfibre fibres abrade the clear coat more efficiently than foam, clearing defects in fewer passes.
-
One-step finish
The OSP pad cuts and refines together, leaving a gloss-ready surface without a second pad swap.
-
Size versatility
Mini to large profiles mean you can match the pad to the panel for consistent correction across the whole car.
-
DA compatible
Engineered for dual-action machines so you get controlled aggression without the risk of burning through edges.
How it compares
Microfibre vs standard foam correction pads
Foam correction pads do a solid job on light to moderate defects, but microfibre changes what is possible on a DA machine. Here is how the Lake Country Microfiber Pads stack up against a typical foam cutting pad.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Works on a DA polisher | Yes | Yes |
| Safe on clear coat paint | Yes | Yes |
| Higher abrasion per pass than foam | Yes | No |
| One-step cut and refine option | Yes | No |
| Available in multiple panel sizes | Yes | Yes |
| May leave micro-marring on very soft paint | Yes | No |
Size for every panel
From tight door jambs to wide bonnets
The range spans mini pads for intricate sections all the way to larger profiles for open panels, so you can run the right pad size for every part of the car without compromise. Pair any size with your preferred backing plate and compound, and the microfibre face does the rest.
Reviews
What our customers say
4.7
Based on 6 reviews
Naledi H.
Verified
OSP on black paint - took a bit of practice to get pressure right but the gloss at the end was clean. No haze, no residue.
Riedwaan C.
Verified
Oxidation on a white bakkie. Two passes with the 525 CUT pad and a cutting compound, followed up with a light polish. Came out well.
Deepak N.
Verified
Faster than any foam pad ive used at the same machine setting. The microfibre face just bites into the clear coat without cooking it.
Mbali T.
Verified
Mini pads in the 150 size are perfect for around door handles and mirrors. Was skeptical but they hold their shape and cut evenly. 😊
Stefan P.
Verified
Three jobs in now and the pads are still cutting properly after washing. Pads arrived neatly packed and were easy to identify by size.
Questions
Frequently asked
What is the difference between the CUT and OSP microfibre pads?
The CUT pad is built for heavier correction - removing deep swirls, oxidation and scratches in fewer passes. The OSP (One Step Polish) pad is designed to cut and refine in the same stage, making it useful when you want correction and a gloss-ready surface without swapping pads mid-job.
Which DA polishers are these pads compatible with?
The pad range is designed for dual-action polishers. The size you choose should match your backing plate - check the pad diameter against your plate size for best coverage and control. Mini pads in the 150mm range work well on 15mm throw machines for tight sections, while the larger 525mm and 625mm pads suit standard 21mm DA machines for open panels.
What compounds and polishes work best with these pads?
The CUT pad pairs well with any quality cutting compound for heavy defect removal. The OSP pad suits one-step polishes or lighter compounds where you want correction and clarity together. Both pads work with water-based and solvent-based products - prime the pad before your first section to avoid product absorbing unevenly into the microfibre face.
How do I clean and maintain these microfibre pads?
Rinse spent product out of the pad regularly during use with a pad-cleaning brush or pad washer - microfibre loads up faster than foam and performance drops when it is saturated. After a job, machine-wash the pads without fabric softener and air-dry completely before storing. Do not tumble dry on high heat as this damages the microfibre pile.
Can I use these pads on clear coat, single-stage paint and freshly sprayed panels?
Yes. The CUT pad is suited to hard clear coats and oxidised single-stage paint where foam alone is not giving you enough aggression. On freshly sprayed or soft paint, start with the OSP pad and a lighter polish first to gauge how quickly the surface responds - microfibre cuts more aggressively than foam so it rewards a cautious first pass.
Are these safe to use on PPF and vinyl wraps?
Use caution on PPF and vinyl. The microfibre face is more aggressive than a standard foam finishing pad, so high machine speeds combined with heavy compound can generate heat that lifts edges or damages film. If you need to polish over PPF, use the OSP pad at low speed with a light polish and keep passes short.
How many passes does it typically take to remove moderate swirl marks with the CUT pad?
On medium-hard clear coat with a quality cutting compound, most moderate swirls will clear in two to four slow passes at medium machine speed. Harder or more stubborn finishes may need an additional pass. Work a small section at a time, check your work under a panel light, and step down to the OSP pad or a finishing pad to refine before moving on.
Do I need to follow up with a finishing pad after using the CUT pad?
In most cases, yes. The CUT pad removes defects efficiently but can leave light micro-marring on very reflective or dark paint. Following up with an OSP pad and a light polish, or a dedicated finishing pad and finishing polish, will refine the surface to full gloss. On less critical paint or where a topping product will be applied, some detailers find one step with the OSP pad is enough.