Zvizzer UFO Pad Grey: Cutting Pad 3 Inch
R 145.00
- UFO shape distributes pressure evenly
- Thermostable open-cell foam resists heat build-up
- PU layer blocks polish from reaching the Velcro
- Beveled edges prevent edge accumulation and holograms
- Cutting grade foam for one-step swirl removal
- PU layer protects Velcro and extends pad lifespan
- Beveled UFO edge eliminates holograms and hard transitions
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,272.00
Precision Engineering
Cut with control, not compromise
The Zvizzer UFO Grey's tapered UFO profile and thermostable open-cell foam deliver a consistent cutting grade across the entire face of the pad - no hot spots, no uneven pressure, no guesswork. It's built for detailers who want repeatable results on every panel.
Why UFO Grey
Every feature earns its place
Designed around the demands of one-step speed polishing.
-
Even Pressure Distribution
The symmetrical UFO contour spreads machine pressure evenly across the pad face for a consistent cut on every pass.
-
Reduced Vibration
The optimised PU layer lowers pad weight and dampens vibration, so you stay in control across long polishing sessions.
-
Velcro Protection
The integrated PU layer prevents polish from penetrating to the Velcro, extending the pad's lifespan significantly.
-
Hologram-Free Finish
Beveled edges let polish flow off cleanly, eliminating edge accumulation, hard transitions and buffer trails.
UFO Grey vs Standard Pads
Not all cutting pads are built the same
Standard foam cutting pads get the job done - until they don't. Here's how the Zvizzer UFO Grey holds up against a typical foam cutting pad in the same size category.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Thermostable foam (holds shape under heat) | Yes | No |
| PU layer protecting Velcro from polish penetration | Yes | No |
| Beveled edges reducing holograms at panel edges | Yes | No |
| Available in cutting grade for one-step work | Yes | Yes |
| Compatible with standard 3-inch backing plates | Yes | Yes |
| Colour-coded hardness system across a full range | Yes | No |
Built to Last
The PU layer changes everything
Most foam pads fail from the inside - polish soaks into the Velcro, the bond weakens and performance drops. Zvizzer's integrated PU layer blocks that migration completely, keeping the backing clean, the pad lighter, and the vibration lower for the life of the pad.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What polisher and backing plate does the Zvizzer UFO Grey 3-inch pair with?
This pad is designed for a 3-inch (75 mm) backing plate. It pairs well with compact dual-action polishers and forced-rotation machines - anything where a smaller pad gives you better access to tight panels, bumpers and curved surfaces.
What does 'grey' indicate in the Zvizzer UFO range?
In the Zvizzer UFO system, each colour corresponds to a clearly defined hardness level. Grey is the cutting grade, suited to removing light to moderate swirl marks, scratches and oxidation in one or two passes when paired with an appropriate one-step speed polish.
What type of polish works best with this pad?
Zvizzer developed the UFO pad range specifically around their One-Step Speed Polish. That said, the open-cell foam is compatible with most one-step and light cutting compounds - just avoid overloading the pad, as the PU layer is designed to work with controlled amounts of product.
How do I prevent heat build-up during a correction session?
The thermostable open-cell foam is engineered to dissipate heat as you work, so the pad holds its shape and cut consistency even under sustained machine pressure. Keep your speed and pressure moderate, and the foam does the rest. You shouldn't need to pause as often as with a standard closed-cell pad.
Will this pad leave holograms or buffer trails?
The beveled UFO edge is specifically designed to prevent the hard transitions that cause holograms and buffer trails. Polish flows off the edge cleanly rather than accumulating and dragging, which means cleaner results especially when working to panel edges.
How do I clean and maintain the UFO Grey pad?
Brush out loaded polish regularly during your session using a pad cleaning brush or pad washer. After use, wash the pad with a dedicated pad cleaning solution, rinse thoroughly and allow it to dry flat. The PU layer protects the Velcro from product penetration, which significantly extends the pad's usable life compared to pads without a backing barrier.
Is this pad safe on all paint types, including soft or freshly cured paint?
The UFO Grey is a cutting grade pad, so it carries genuine abrasive aggression when paired with a cutting compound. On soft, freshly cured or thin paint, consider a lighter pad from the UFO range. Always test on a small, inconspicuous area first if you are unsure of the paint's condition or hardness.
Can I use the UFO Grey pad by hand?
This pad is designed for machine use. The UFO shape and PU layer are optimised for rotary or dual-action machines where the centrifugal motion and even pressure distribution fully activate the foam's cut and the pad's geometric benefits. Hand application won't deliver the same controlled result.