Thabo M.
Verified
Holograms from my rotary were completely gone after one pass with the M3.02. The paint looked properly corrected, not just smoothed over.
Koch-Chemie Micro Cut M3.02 Machine Micro-Polish
R 1,150.00
- Permanently removes holograms and fine swirls
- Latest-generation micro-polish formula
- Leaves a high-gloss, refine-ready finish
- Suited to machine application on all paint types
- Permanently removes holograms and fine swirl marks
- No filler - true correction in clear coat
- Latest-generation micro-polish formula
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 3,320.00
Precision Micro-Polish
Holograms and swirls gone, properly
M3.02 is built for the stage that separates a good correction job from a great one - removing the haze, holograms and fine swirl marks that remain after cutting, without filling them. What you see on the paint after M3.02 is the real result.
Why M3.02
Built for the detail that matters
Four reasons professionals reach for the M3.02 at the finishing stage.
-
True Hologram Removal
Permanently eliminates holograms and machine-induced swirl marks without masking them with filler.
-
Latest-Gen Formula
New-generation micro-abrasive chemistry breaks down cleanly, leaving a clear, high-gloss surface.
-
No Filler Residue
What you see after polishing is the real paint condition, ready for inspection and protection.
-
Coating-Ready Surface
Pairs directly with ceramic coatings and sealants - no additional stripping step needed.
M3.02 vs Generic Micro-Polish
Not all finishing polishes are the same
Many micro-polishes on the market use filler chemistry to mask defects temporarily. Here is how the M3.02 compares to a typical budget finishing polish.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Permanent defect correction | Yes | No |
| Free of filler chemistry | Yes | No |
| Hologram and streak removal | Yes | Yes |
| Safe on all paint colours | Yes | Yes |
| Coating-ready finish without re-stripping | Yes | No |
| Compatible with DA and rotary machines | Yes | Yes |
Coating-Ready Finish
A surface worth protecting
Because M3.02 uses no filler chemistry, the high-gloss surface it leaves is immediately ready for a ceramic coating, paint sealant or wax. No re-stripping, no guessing whether the paint is clean underneath - just a correctly corrected finish.
Reviews
What our customers say
4.8
Based on 10 reviews
Zainab F.
Verified
Finished a correction job on a dark blue sedan and used this as the last polish stage. Gloss depth was exceptional and no holograms under the inspection light.
Sibusiso A.
Verified
Solid finishing polish. Takes a little time to break down fully on a DA but the result is clean and coating-ready. No filler nonsense.
Priya V.
Verified
Tried a cheaper micro-polish before and the swirls came back after a wash - classic filler. M3.02 is the real thing. Swirls are actually gone.
Rashieda O.
Verified
Applied it before a ceramic coating and the paint surface was exactly what I needed - clean, glossy, no residue. Happy with the result.
Kabelo S.
Verified
Runs clean on the pad and wipes off easily. For a finishing stage this is about as good as it gets without spending silly money.
Farouk I.
Verified
Correction job on a silver hatch that had years of swirl damage. M3.02 as the final step and the paint looked flawless under a raking light. Properly impressed.
Anele D.
Verified
Good product. I use it after the H9.02 compound and the transition between stages is seamless. Packaging from Detailer SA was solid, product arrived in perfect condition.
Megan A.
Verified
Pearl white paint, nasty swirl marks, no filler wanted anywhere near it before coating. M3.02 sorted it cleanly.
Yusuf C.
Verified
Sharp gloss with zero residue left on the panel. Koch-Chemie consistently delivers at this stage of correction and M3.02 is no exception.
Questions
Frequently asked
What machine type is the M3.02 designed for?
It is formulated for machine application and works well on both dual-action polishers and rotary machines. On a rotary, pair it with a soft finishing pad and keep speeds moderate to avoid re-introducing holograms.
Which pad should I use with M3.02?
A medium-soft to finishing foam pad suits the M3.02 best. For stubborn holograms or light sanding marks, step up to a medium foam pad. Koch-Chemie's own pad range is designed to work in step with this polish, but it is compatible with other quality foam and microfibre pads.
Will M3.02 remove deeper scratches or sanding marks?
M3.02 is a micro-polish, not a cutting compound. It is designed to follow a cut stage, removing the haze and holograms left behind, and to tackle fine swirl marks in clear coat. For deeper sanding marks or heavy scratches, use a dedicated compound like Koch-Chemie Heavy Cut H9.02 first, then finish with M3.02.
Does M3.02 contain fillers or glazes?
No. The M3.02 delivers permanent correction without filler chemistry. The result you see after polishing reflects the actual state of the clear coat, which makes it a reliable step before coating, sealant or wax application.
Is it safe on all paint colours and types?
Yes. M3.02 is safe on all paint colours, including white, silver, black and deep metallics, and on all standard clear coat finishes. It is not intended for use on bare metal, uncoated plastics or matte/satin finishes.
What is the flash time, and when do I wipe it off?
M3.02 does not flash off like a ceramic coating. Work a panel section at a time, polishing until the product breaks down and the surface starts to clear, then wipe off immediately with a clean, soft microfibre cloth. Do not let it dry hard on the surface.
Can I apply a ceramic coating directly after using M3.02?
Yes. Because M3.02 leaves no filler residue, the surface is ready for ceramic coating once the polish residue has been wiped off and the panel has been decontaminated and IPA-wiped. No additional refinement or stripping step is required.
How much product do I need per panel?
As with most machine polishes, a small amount goes a long way. Start with three to four pea-sized drops spread across your pad for a standard bonnet or door panel. Adjust based on the size of the section and the pad you are using. Using too much product at once can make it harder to work and increases waste.