Lake Country Microfibre Black Polishing Pads
R 185.00
- Haze-free lustre in one step
- Precision sizing for even pressure
- Specialty microfibre blend for refined finishing
- Durable foam interface for pad longevity
- Leaves a haze-free, luster-ready finish
- Precision sizing for consistent pad pressure
- Durable bonding holds up through repeated use
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,355.00
Microfibre Finishing
Close out your correction without the haze
The black microfibre face works your finishing polish into the paint and refines it in the same pass, leaving a luster-ready surface without the extra buffing steps that foam pads sometimes demand.
Why Lake Country Microfibre
Engineered for the finishing stage
Four reasons detailers keep reaching for these pads.
-
Haze-Free Lustre
The specialty microfibre blend refines down to a clean, high-gloss finish ready for protection.
-
Precision Sizing
Minimal overhang keeps pressure even and gives you control on edges and tight panels.
-
Long-Term Durability
Bonding materials hold the pad construction together through repeated use and washing.
-
Optimised Foam Interface
Finishing-density foam backs the microfibre face for consistent feedback and pad life.
How does it stack up?
Lake Country Microfibre Black Polishing Pad vs a typical cheaper foam finishing pad
Foam finishing pads do the job for many detailers, and a decent one will not ruin your paint. But if you are chasing a haze-free result straight off the machine, the pad you choose makes a real difference. Here is an honest look at where the Lake Country Microfibre pad stands out and where the two options are roughly equal.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Haze-free finish without an extra refinement step | Yes | No |
| Compatible with both DA and rotary machines | Yes | Yes |
| Holds construction integrity through repeated machine washes | Yes | No |
| Works on light-to-moderate defects in a single stage | Yes | Yes |
| Precision sizing for even pressure across the full pad face | Yes | No |
| Lower cost per pad | No | Yes |
Built to Last
Pads that hold together session after session
Special bonding materials keep the microfibre construction locked to the foam interface, so these pads wash clean and come back to work without the delamination or fibre loss that cheaper options suffer after a few uses.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine is this pad designed for?
The Lake Country Microfibre Black Polishing Pad is compatible with both dual-action (DA) polishers and rotary machines. The foam interface density is tuned for finishing work, so pair it with a backing plate that matches the pad diameter for best results.
Which products work best with this pad?
It pairs well with finishing polishes and one-step products. The microfibre face has enough texture to work a light polish efficiently while still refining the surface to a haze-free luster. Avoid heavy cutting compounds on this pad - those are better suited to a more aggressive foam or microfibre cut pad.
Can I use this pad on clear coat, PPF, and ceramic-coated surfaces?
Yes. The pad is safe on clear coat and paint-protection film. On ceramic-coated surfaces, keep in mind that correction requires breaking through the coating layer - assess whether correction is appropriate before proceeding, and use the right product for the job.
What finish level does this pad produce?
It is rated as a finishing pad. Expect a haze-free, high-gloss result that is ready to receive a sealant, wax, or ceramic coating without further refinement in most cases. Results depend on the product used and the condition of the paint.
How do I clean and maintain the pad?
Remove product build-up during use with a pad conditioning brush. After the session, wash the pad by hand or in a machine wash on a gentle cycle using a dedicated pad cleaner. Allow it to air dry completely before storage or reuse. The bonding materials and foam interface are designed for repeated washing without delamination.
How much polish should I apply to the pad?
Start with a small amount - about three to four pea-sized dots spread across the face of the pad. Microfibre pads can be more efficient at working product than foam, so you may find you need less than you expect. Prime the pad on the first pass and adjust from there.
Can this pad be used by hand, or is a machine required?
While machine use is recommended to get the most from the pad, light hand application is possible on small areas. For consistent pressure and results across panels, a DA or rotary polisher is the right tool for this pad.
How does the precision sizing benefit my work?
Minimal overhang means the working surface of the pad stays over the panel and not hanging over edges or trim. This gives you more control over pressure distribution, reduces the risk of burning edges, and makes tight areas easier to work without constant re-positioning.