Innovacar SiNH Hybrid Coat H7 Ceramic Coating 4-5 Years
R 1,500.00
- Single-step inorganic-organic Si-N-H formula
- ISO-tested to 4-5 years, 75 000 km or 72 washes
- Cures at room temperature, no IR lamp required
- Antistatic self-cleaning with micro-scratch regeneration
- ISO-tested: 4-5 years, 75 000 km protection
- Hydrophobic beading and sheeting in a single coat
- Room-temperature cure, no IR lamp needed
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 3,750.00
Si-N-H Technology
Two coats' worth of protection in one step
Innovacar's Si-N-H formula bridges the gap between inorganic base-coat durability and organic top-coat hydrophobicity. Where a traditional ceramic system requires separate layers and extended cure time, SiNH Hybrid Coat delivers both in a single application, cutting booth time without cutting corners on performance.
Why SiNH Hybrid Coat
Professional results, simplified process
One formula built to handle what used to take two products.
-
Hybrid Si-N-H Formula
Inorganic protection and organic hydrophobicity combined in a single, professionally engineered coating layer.
-
ISO-Tested Durability
Independently certified to ISO 20566:2013, covering gloss retention and hydrophobicity over 4-5 years or 75 000 km.
-
Micro-Scratch Regeneration
Superficial surface marks can self-repair at elevated temperatures, keeping the finish looking sharp between corrections.
-
No IR Lamp Required
Full room-temperature cure means any detailer can apply this coating without specialist curing equipment.
How does it stack up?
Innovacar SiNH Hybrid Coat vs a typical entry-level ceramic coating
Not all ceramic coatings deliver the same experience on the job or on the car. Here is an honest look at where the SiNH Hybrid Coat genuinely differs from the kind of budget ceramic you will find at most motor spares stores, and where both products hold their own.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Single-layer application (base coat and top coat combined) | Yes | No |
| Cures fully at room temperature without an IR lamp | Yes | Yes |
| ISO 20566:2013 certified durability rating (4-5 years or 75 000 km) | Yes | No |
| Micro-scratch regeneration at elevated temperatures | Yes | No |
| Antistatic dirt-repellent properties between washes | Yes | Yes |
| Lower cost per bottle | No | Yes |
ISO-Certified Durability
Tested to a standard, not just a claim
SiNH Hybrid Coat's 4-5 year rating is backed by ISO 20566:2013 testing for gloss retention and surface hydrophobicity, covering up to 75 000 km or 72 wash cycles. The antistatic, dirt-repellent finish also means surfaces stay cleaner between washes, reducing maintenance frequency and the risk of wash-induced swirl marks accumulating over time.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
How do I apply SiNH Hybrid Coat?
Apply the coating to a clean, decontaminated and corrected surface using a ceramic applicator block. Work panel by panel, allow approximately 20 minutes of flash time at 23°C and 50% relative humidity, then level and buff off with a clean, dry microfibre towel. One product, one step - no separate base coat or top coat is needed.
What surfaces can SiNH Hybrid Coat be applied to?
SiNH Hybrid Coat is suitable for paint, glass and wheels. As with any ceramic coating, avoid application on raw rubber, bare unprimed plastics or porous trim that has not been sealed first.
What is the flash time and how long does it take to cure?
At 23°C and 50% relative humidity, flash time is approximately 20 minutes. The coating cures at room temperature without the need for an IR curing lamp, making it practical for a wide range of shop environments. Allow adequate cure time before exposing the vehicle to water or washing.
How long does the coating last?
SiNH Hybrid Coat has been independently tested to ISO 20566:2013 for gloss retention and surface hydrophobicity. It is rated at approximately 4-5 years, 75 000 km or up to 72 manual and automatic washes - whichever comes first under real-world conditions.
Do I need an IR curing lamp?
No. Unlike many professional-grade ceramic coatings that require infrared lamps to accelerate the cure cycle, SiNH Hybrid Coat is formulated to cure fully at ambient room temperature. This makes it accessible for detailers and enthusiasts who do not have IR equipment.
Can SiNH Hybrid Coat be layered or topped with a ceramic booster?
As a hybrid single-layer system, SiNH Hybrid Coat is designed to deliver complete protection in one coat. For additional slickness or enhanced beading between maintenance washes, a compatible ceramic spray booster or Si-based detailer can be used after full cure. Always confirm compatibility with Innovacar's recommended maintenance products before layering.
What does the micro-scratch regeneration feature mean in practice?
The Si-N-H formula includes properties that allow very superficial surface marks - light hazing or micro-marring from normal use - to partially self-repair when the coating reaches elevated temperatures, such as those generated by direct sunlight or warm-water washing. This is not a substitute for paint correction, but it does help the coating maintain its gloss and clarity over time.
How should the paint be prepared before applying SiNH Hybrid Coat?
The surface must be fully decontaminated before application. Run a chemical decon step to remove fallout and iron contamination, clay bar the paint if needed, and complete any paint correction before coating. The surface must be completely clean, dry and free of any polishing oils or residues. IPA wipe-down before application is strongly recommended to ensure proper bonding.