Rupes HLR21 BigFoot iBrid Polisher 21mm - Basic Kit
Sale price
R 18,500.00
Regular price R 19,975.00
- Cordless and corded in one machine
- In-runner brushless motor for consistent torque
- 18V 5Ah Li-ion battery, 40 minutes at full power
- Dual battery charger included in kit
- Brushless motor holds speed under load on every pass
- Cordless or corded - switch without stopping work
- 40 minutes full-power runtime per 18V 5Ah charge
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 22,650.00
Cordless meets corded
Full correction power, no cable compromise
The HLR21 iBrid runs on its 18V 5Ah battery for up to 40 minutes at full power, and connects to mains when you need continuous operation. The brushless in-runner motor keeps torque consistent under load, so you cut and refine at the same rate from the first panel to the last.
Why the HLR21 iBrid
Four reasons detailers choose it
Performance, freedom and control in one machine.
-
Brushless motor power
In-runner brushless motor maintains torque under load without overheating or losing speed mid-panel.
-
Cordless freedom
18V 5Ah battery gives you 40 minutes at full power - work in any bay, outdoors or in tight spaces.
-
Refined pad control
New anti-spinning ring and updated eccentric set reduce unwanted marks and improve correction consistency.
-
Always-ready charging
Dual battery charger prioritises the highest-voltage pack so a fully charged battery is always standing by.
How it stacks up
HLR21 iBrid vs a standard corded DA polisher
Most workshops already have a corded DA polisher. Here is where the HLR21 iBrid makes a meaningful difference - and where a conventional machine still holds its own.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Cordless operation | Yes | No |
| Corded / mains operation | Yes | Yes |
| In-runner brushless motor | Yes | No |
| Consistent torque under load | Yes | Yes |
| Anti-spinning ring for pad control | Yes | No |
| Unlimited runtime (no battery limit) | No | Yes |
Built for professionals
Engineered where the details matter
The new anti-spinning ring, updated gear technology and redesigned eccentric set are not incremental changes - they are what separate a machine that performs consistently on the 20th car of the week from one that only impresses on the first. The HLR21 is built for detailers who do this for a living.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What is the orbit size of the HLR21 and what correction work is it suited to?
The HLR21 has a 21mm orbit. That is Rupes's standard BigFoot throw, well suited to cutting medium to heavy swirl marks and random scratches with a cutting compound and foam or microfibre pad, and equally capable of refining and finishing when you step down to a lighter polish and softer pad.
Can I use the HLR21 while it is plugged in, or only on battery?
Yes, the iBrid system is designed to run both ways. You can operate it on the 18V Li-ion battery alone, or connect it to a corded power source for continuous mains-powered operation. The machine switches between the two, so you are never forced to stop mid-panel.
How long does the battery last and how quickly does it recharge?
The 18V 5Ah Li-ion battery delivers approximately 40 minutes of runtime at full power. The included dual battery charger uses fast-charging cell technology and prioritises the highest-voltage battery first, so you have a fully charged pack ready as quickly as possible.
What pad sizes are compatible with the HLR21?
The HLR21 is a 21mm orbit machine. Rupes recommends pairing it with 150mm (6-inch) backing plates and pads, which is the standard BigFoot HLR21 pad size. Always match your pad to the correct backing plate diameter for safe, effective operation.
What compounds and polishes work well with this machine?
The HLR21 is compatible with the full range of Rupes Zephir and UNO compounds and polishes, as well as third-party products. For heavy correction, pair it with a cutting compound and a microfibre or firm foam cutting pad. For finishing, use a light finishing polish with a soft foam finishing pad. The brushless motor handles both without bogging down.
Is the HLR21 suitable for use on PPF and ceramic-coated vehicles?
Yes, with the right product selection. On PPF, use a low-cut finishing polish and a soft foam pad at moderate speed to avoid heat build-up. On ceramic-coated paintwork, the HLR21 can be used to prepare the surface before re-coating or to lightly polish the existing coating - always confirm your coating manufacturer's guidance on machine polishing over their product.
What is included in the Basic Kit?
The Basic Kit includes the HLR21 iBrid polisher, one 18V 5Ah Li-ion battery, and the dual battery charger. It does not include backing plates or pads, so you will need to select these separately to suit your correction or finishing work.
How does the anti-spinning ring and new eccentric set improve on previous models?
The updated anti-spinning ring gives you better pad control, reducing the risk of the pad free-spinning during operation - particularly useful when working at higher speeds on curved panels. The new eccentric set improves the quality of the oscillation pattern, which translates to more efficient cut and a more refined finish with fewer operator-induced marks.