Harry Coetsee
Verified
Nothing more to say
Rupes Backing Pad for LHR15 and LHR12 125mm
R 950.00
- Hard backing pad for LHR15 and LHR12 polishers
- Multi-hole slim design reduces heat and weight
- 125mm diameter, M8-M fitting
- Velcro interface for secure pad attachment
- Direct M8-M fit for LHR15 and LHR12 polishers
- Hard plate keeps pad flat for even cutting pressure
- Multi-hole slim body cuts heat and reduces weight
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 3,200.00
Built for Rupes
A stable platform for every correction pass
The Rupes 125mm Hard Backing Pad gives your LHR15 or LHR12 a firm, flat foundation so your polishing pad works the way it is supposed to - even contact, consistent cut, no rolling or flexing on flat panels.
Why This Plate
Every detail matters on a backing pad
The right plate makes every other variable easier to control.
-
Exact Machine Fit
M8-M thread fits the LHR15 and LHR12 spindle directly, no adapters needed.
-
Hard Plate Control
Hard durometer backing keeps the pad face flat for maximum, even cutting pressure.
-
Reduced Heat Build-up
Multi-hole slim profile allows airflow that protects paint and extends pad life.
-
Secure Velcro Hold
High-retention Velcro interface keeps pads locked on through heavy correction cycles.
How does it stack up?
Rupes 125mm Hard Backing Pad vs a typical cheaper alternative
A backing pad is easy to overlook, but the wrong one costs you correction time and risks uneven pressure on your paintwork. Here is an honest look at where this Rupes pad differs from a generic option, and where either will do the job.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Direct fit for Rupes LHR15 and LHR12 via M8-M thread | Yes | No |
| Hard durometer compound keeps the pad flat under load, preventing pressure rolling to the edges | Yes | No |
| Multi-hole slim design for airflow and reduced heat build-up during heavy correction | Yes | No |
| Velcro interface that holds foam and microfibre pads securely | Yes | Yes |
| Compatible with standard 125mm and 130mm foam pads from multiple brands | Yes | Yes |
| Budget-friendly price point for occasional hobby use | No | Yes |
Less Heat, Lighter Setup
Multi-hole slim design keeps your pad cooler
The slim multi-hole construction circulates air through the plate during polishing, reducing heat at the pad interface and extending the life of your foam or microfibre pads, without adding bulk to your machine setup.
Reviews
What our customers say
5.0
Based on 1 reviews
Questions
Frequently asked
Which Rupes machines does this backing pad fit?
This backing pad is designed for the Rupes LHR15 and LHR12 random orbital polishers. It uses an M8-M male thread fitting, which is standard on those machines. If you are unsure about compatibility with another Rupes unit, check that your machine accepts an M8 thread before ordering.
What pad sizes should I use with this 125mm backing pad?
For a 125mm backing plate, Rupes recommends pairing it with 130mm foam or microfibre polishing pads. Using a pad slightly larger than the plate helps protect the Velcro edges and ensures full-face coverage on the panel. Avoid using pads significantly smaller than 125mm, as that exposes the plate edges and can mar the paint.
Why choose a hard backing pad over a soft one?
A hard backing pad keeps the polishing pad flatter under load, which delivers more consistent cutting pressure across the entire pad face. This makes it the preferred choice for paint correction on flat or large panels where you want maximum cut and uniform results. Softer plates flex to follow tighter curves, so the right choice depends on the panel geometry you are working on.
What does the multi-hole slim design actually do?
The multi-hole pattern allows air to circulate between the backing plate and the pad during polishing. This reduces heat build-up at the pad interface, which helps protect heat-sensitive paint finishes and extends foam pad life. The slim profile also lowers the overall weight of the plate-and-pad assembly, reducing fatigue on longer correction sessions.
How do I attach and remove pads from this backing plate?
The Velcro interface means you simply press your pad firmly onto the plate until it seats fully, then pull it straight off when you are done. Make sure the Velcro face is free of compound residue before attaching a fresh pad - built-up product between the hooks and loops weakens the grip and can cause the pad to detach mid-correction.
How do I fit this backing pad onto my LHR15 or LHR12?
Thread the M8-M fitting into the spindle of your LHR15 or LHR12 by hand, then tighten firmly. Do not over-torque the thread. Some detailers use a pad-removal tool or a quick spin of the machine (locked off) to snug it up. Always ensure the plate is fully seated before running the machine at speed.
How do I keep the Velcro in good condition?
After each session, clean compound and polish residue off the Velcro face with a stiff detailing brush or by running a foam pad lightly across it to lift trapped fibres. Avoid soaking the plate in water or cleaning agents, and store it away from direct sunlight and extreme heat, which can cause the hooks to harden and lose grip over time.
Can this backing pad be used with a forced-rotation or gear-driven polisher?
This plate is specified for the Rupes LHR15 and LHR12 random orbital polishers. Using it on a forced-rotation or gear-driven machine is not recommended, as the stresses on the plate and thread are different and could cause premature wear or failure. Stick to the machines it is rated for to get the best results and longest service life.