Innovacar DL Lube Clay Bar Lubricant
R 300.00
- Safe on paint, glass and trim
- Low evaporation outlasts water sprays
- Preserves clay bar composition and life
- 20 ml average consumption per vehicle
- Glides clay over paint and glass without marring
- pH 8.00 - won't degrade your clay bar's composition
- Low evaporation - safe to use on polishing pads too
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 876.00
Clean Decon, Zero Marring
Clay bars work better when the surface is properly lubricated
DL Lube keeps the clay bar gliding safely across paint and glass, reducing friction to the point where bonded contamination lifts out cleanly without leaving fresh marring behind. It is the step that makes mechanical decontamination worth doing.
Why DL Lube
Built for every stage of decontamination
From the first clay pass to the final pad prime, DL Lube earns its place in the kit.
-
Friction-Free Claying
Keeps the clay bar floating over the surface so bonded contamination lifts without causing fresh marring.
-
Clay-Safe Formula
pH 8.00 formula does not degrade the clay's composition, so the bar lasts longer between replacements.
-
Low Evaporation
Stays wet on the panel long enough for thorough passes - and doubles as a pad lubricant during polishing.
-
Multi-Surface Use
Works on painted bodywork, glass, and can be used with cloths, pads or discs across all prep stages.
How does it stack up?
Innovacar DL Lube vs a typical cheaper clay lubricant
Not all clay lubricants are equal. Some are little more than diluted quick detailers that evaporate fast and leave your clay bar sticky or degraded after a few passes. Here is an honest look at where DL Lube differs and where any decent product in this category holds its own.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Prevents marring and paint scratching during clay use | Yes | Yes |
| Safe for use on both paint and glass | Yes | Yes |
| Does not degrade or alter the clay bar over time | Yes | No |
| Low evaporation rate - stays wet through each full panel pass | Yes | No |
| Can prime polishing pads without interfering with the polish | Yes | No |
| Low consumption - approximately 20 ml per full vehicle | Yes | No |
More Than a Clay Lube
A versatile lubricant for prep and polishing
Because DL Lube has low evaporation and does not interfere with polish chemistry, professional detailers also use it to prime pads before compound or polish stages, keeping the cutting action consistent from the first pass to the last.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
How do I use DL Lube with a clay bar?
Wash the vehicle thoroughly first, then spray DL Lube directly onto the panel and onto the clay bar. Work the clay in overlapping, straight-line passes using light pressure. Wipe away any residue with a clean microfibre and move to the next section. Fold the clay regularly to expose a clean face.
Can I use DL Lube on glass?
Yes. DL Lube is suitable for use on automotive glass as well as painted bodywork, making it straightforward to run the clay bar across windscreens and side windows in the same session as the panels.
Is DL Lube safe on all paint types, including wrapped or PPF-covered panels?
The pH 8.00 formula is mild and safe on standard automotive paint. For PPF and vinyl wraps, spot-test a small area first, as some wrap materials can react to lubricants not specifically formulated for them.
Why use DL Lube instead of just water or a quick detailer?
DL Lube has significantly lower evaporation than water, so it stays wet on the panel long enough to keep friction low throughout the pass. Unlike many quick detailers, it also does not interfere with subsequent polishing, making it the better choice when you plan to compound or polish immediately after decon.
Can DL Lube be used to lubricate polishing pads on a machine polisher?
Yes - Innovacar specifically recommends this. Apply a small amount to the pad face before priming with polish. The lower evaporation rate compared to water means the pad stays consistently lubricated without diluting the abrasive compound.
How much product do I need per vehicle?
Innovacar states an average consumption of 20 ml per vehicle, making a 500 ml bottle sufficient for a large number of decon sessions before you run out.
Will DL Lube damage or shorten the life of my clay bar?
No. The formula is specifically designed not to affect the clay's composition. Regular use with DL Lube actually helps preserve the clay bar by preventing it from drying out or picking up excess grit that would shorten its useful life.
Should I clay bar before or after chemical decontamination?
Innovacar recommends evaluating the type of contamination first. Chemical decon (iron fallout removers, tar removers) is best done before claying. The clay bar step handles the remaining bonded contamination that chemical products leave behind. If you are going straight into polishing or correction, mechanical decon with DL Lube is the right follow-up step.