Johann Maree
Verified
not car related but used it to clean glass shower glass with ease will work on any glass
Innovacar 100% Scale Limescale Remover
R 500.00
- Dissolves limescale, salt stains and acid rain deposits
- Acid pH formula for intense decontamination
- Safe on all external vehicle surfaces
- Preps paint for correction or coating work
- Acid pH formula dissolves limescale fast
- Removes salt, acid rain and light oxidation
- Safe on all external vehicle surfaces
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,615.00
Acid Decontamination
Cut through limescale where other cleaners give up
100% Scale uses an acid pH formula to chemically dissolve mineral deposits, salt stains and acid rain residue that alkaline wash products simply cannot shift. It is the targeted solution for stubborn limescale on paint, glass and trim before you move into correction or protection stages.
Why 100% Scale
Purpose-built for mineral decontamination
Four reasons professional detailers reach for 100% Scale
-
Acid pH Formula
Specifically formulated to dissolve limescale and mineral deposits that neutral or alkaline products leave behind.
-
Salt and Acid Rain
Targets salt stains and acid rain etching across all external vehicle surfaces in a single application.
-
All Exterior Surfaces
Safe and effective on paint, glass, plastic trim and wheels - covers the full exterior in one decon stage.
-
Correction-Ready Finish
Leaves surfaces clean of mineral contamination so polishing compounds and coatings bond and perform correctly.
How does it stack up?
Innovacar 100% Scale vs a typical cheaper limescale remover
Not all limescale removers are built for paintwork. Here is an honest look at where Innovacar 100% Scale differs from a generic budget alternative, and where both products get the job done equally well.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Removes limescale deposits from paint, glass and trim | Yes | Yes |
| Safe for use across all exterior vehicle surfaces | Yes | Yes |
| Also treats light acid rain etching in the same application | Yes | No |
| Lifts salt residue from underbody panels, sills and wheel arches | Yes | No |
| Formulated as a pre-stage for ceramic coating or PPF installation | Yes | No |
| Budget-friendly entry price point | No | Yes |
Full Decon Prep
Clean down to bare paint before you coat or correct
Mineral contamination left on the surface dulls the finish and prevents sealants and coatings from bonding properly. 100% Scale gives you the confidence that limescale and salt residue have been fully removed, so your correction and protection steps perform as intended.
Reviews
What our customers say
5.0
Based on 1 reviews
Questions
Frequently asked
What does 100% Scale actually remove?
It targets limescale, salt stains, acid rain deposits and slight surface oxidation on external vehicle surfaces. It is not a general iron fallout remover - it is specifically formulated for mineral and salt-based contamination.
Which surfaces can I use it on?
100% Scale is suitable for all external vehicle surfaces, including paint, glass, plastic trim and wheels. Avoid contact with bare aluminium or anodised surfaces unless you have tested in an inconspicuous area first, as acid pH products can affect some metals.
How do I apply it?
Spray 100% Scale directly onto the contaminated surface. Allow it to dwell so the acid chemistry can react with and loosen the deposits, then rinse off thoroughly with clean water. Follow with a full wash before any correction or protection work.
How long should I leave it to dwell?
Dwell time will depend on the severity of the contamination. For light deposits, a short dwell of one to two minutes is usually sufficient. For heavier limescale build-up, a longer dwell may be needed - but do not allow the product to dry on the surface. Work in the shade and on a cool surface.
Can I use it before a ceramic coating or PPF installation?
Yes. Removing mineral contamination is an important decon step before coating or wrapping. After using 100% Scale and rinsing thoroughly, complete your full wash and paint decon process, then proceed with correction and protection as normal.
Do I need to clay the car after using 100% Scale?
100% Scale handles mineral and salt contamination through chemical action. You should still assess the paint for embedded iron fallout and bonded contamination after rinsing - a clay bar or iron remover may still be needed as part of a complete decon stage.
Is 100% Scale safe on glass?
Yes, it is suitable for external glass surfaces and works well on limescale deposits and water spots on windscreens and rear windows. Rinse thoroughly after use. Do not use on tinted glass without testing first.
Can I use it in direct sunlight or on a hot surface?
No. Acid pH products should always be applied to a cool, dry surface in a shaded area. Working in direct sunlight or on a warm panel increases the risk of the product drying before you can rinse, which can cause staining or surface damage.