Guaranteed safe checkout
Total price R 2,290.00
One product, full correction
A1's layered grain technology starts abrasive enough to tackle scratches, oxidation and 2000-grit sanding marks, then breaks down progressively through the polishing pass to leave a clean, hologram-free surface - all without silicones getting in the way of your next protection step.
Why detailers choose A1
Built for professional results without the multi-bottle complexity.
A cut rating of 5/6 removes scratches, oxidation and up to 2000-grit sanding marks in one pass.
Layered grain technology refines itself down to a high-gloss, mark-free surface without a separate finishing step.
No silicones means the paint surface is clean and ready for a ceramic coating, sealant or wax straight after polishing.
Performs consistently on both rotary and rotary-orbital polishers, fitting into any professional workflow.
How does it stack up?
A medium compound should cut effectively and leave a finish worth building on. Here is an honest look at where the A1 differs from a generic budget alternative, and where both products do the job equally well.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Removes scratches and oxidation down to 2000-grit sanding marks | Yes | Yes |
| Compatible with both rotary and DA polishers | Yes | Yes |
| Layered grain technology that breaks down progressively, finishing in the same pass without a second compound | Yes | No |
| Silicone-free formula, ready for sealant, wax or ceramic coating immediately after polishing | Yes | No |
| Leaves a high-gloss result free of holograms and marring at medium cut level | Yes | No |
| Lower cost per unit | No | Yes |
Pad-driven versatility
A1 is equally at home on a rotary or a DA, and the correction-to-finish balance shifts with nothing more than a pad swap - orange for cutting, blue for finishing. One bottle covers both roles in your correction kit.
Reviews
Cuts super easy with the combination polishing pad it reffers, but to remove the polish from the surface is not quick and easy. Ends up wasting time. If there is a secret to it, let me know.
Questions
A1 works with both rotary and rotary-orbital (dual-action) polishers. The layered grain technology performs well under both machine types, so you can run it on a rotary for heavier correction and switch to a DA for lighter refinement without changing products.
For cutting, pair A1 with a medium-hard orange foam pad to maximise abrasion. For finishing, switch to a medium-soft blue pad. The polish itself does not change - the pad selection shifts the balance between cut and finish.
A1 is designed to reduce and in many cases fully remove damage caused by sanding with paper up to 2000 grit. For deeper scratches or heavier defects you may need a dedicated heavy-cut compound first, then A1 as the refining step.
No. A1 is silicone-free, which means you can apply a sealant, carnauba wax or ceramic coating directly after polishing without needing to strip any fillers or LSP inhibitors from the surface first.
Yes. A1 is specifically designed to function as a balanced intermediate abrasive in the second step of a classic polishing process - after a heavy-cut compound and before a finishing polish or LSP. Its 5/6 finish rating means it refines enough to go straight to protection on most paints.
A1 is formulated for painted bodywork - clear coat, single-stage paint and painted plastic panels. It is not intended for bare metal, glass or raw trim. Always test on a small inconspicuous area first on sensitive or delicate finishes.
Apply a few pea-sized drops to your pad per panel. A1 is designed for efficient coverage and lower dust generation, so avoid over-loading the pad. Work one panel at a time, spreading at low speed before increasing machine speed for the correction pass.
A1 leaves a high-gloss, hologram-free finish with no marring. On lighter defects the result can be a fully refined surface in a single step. On heavier work it closes down the finish sufficiently for a final LSP or ceramic coating without an additional refining stage.
