Zvizzer Soft Interface Pad: 6 Inch
R 180.00
- Soft interface pad for DA polishers
- Pairs with ZviZZer F & M pad series
- 150 mm diameter, 10 mm thick open-pore foam
- Inner hole relieves foam pressure for even correction
- Soft foam cushions DA pressure for controlled correction
- Colour-coded yellow for fast pad-system identification
- Open-pore foam prevents heat build-up at 1000-1800 rpm
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 5,395.00
Precision Pressure Control
Dial in your cut, panel by panel
The ZviZZer Soft Interface Pad gives you a layer of control between your backing plate and your polishing pad. By buffering the rigid contact of the plate, it smooths out pressure spikes on curved panels and lets your F or M pad work the surface at the cut level you actually want, not whatever the machine is forcing through.
Why It Works
Interface padding done right
Four reasons the ZviZZer soft interface pad earns its place in your kit bag.
-
Softens Cutting Force
Soft open-pore foam cushions backing-plate pressure so your pad corrects without overworking the paint.
-
Keeps Heat in Check
Reticulated foam allows airflow through the pad stack, reducing heat build-up during extended correction passes.
-
Even Pressure Distribution
The centre hole relaxes foam tension and prevents stiff spots, keeping contact consistent across curved panels.
-
System-Matched Design
Yellow colour coding maps directly to the ZviZZer F & M pad range for fast, error-free pad selection.
Interface Pad vs. No Interface
What changes when you add an interface layer
Running your polishing pad directly on a rigid backing plate works - but compare the two approaches on curved or sensitive panels and the differences become clear.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Even pressure on curved panels | Yes | No |
| Airflow to reduce pad heat | Yes | No |
| Centre hole to relieve foam tension | Yes | No |
| Pairs directly with a polishing pad | Yes | Yes |
| Works on eccentric DA machines | Yes | Yes |
| Rigid feel at high backing-plate speed | No | Yes |
Built for the ZviZZer System
Colour-coded confidence in every pass
ZviZZer's yellow soft rating slots directly into their F and M pad system - pick it up alongside your correction or finishing pads and you have a matched stack that takes the guesswork out of selecting the right hardness for the job.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What is an interface pad and why would I use one?
An interface pad sits between your DA machine's backing plate and your polishing pad. It absorbs flex and redistributes pressure more evenly across the face of the pad. The practical effect is a softer, more forgiving contact patch - useful when you want to dial back the cutting aggression of a harder pad or protect curved panels from edge pressure.
Which ZviZZer pads is this interface pad designed for?
This interface pad is specifically developed for the ZviZZer F and M pad series. ZviZZer's colour-coding system makes it straightforward to match the yellow soft interface pad to the appropriate application pads in that range.
Is it compatible with any DA machine or only ZviZZer machines?
It is compatible with eccentric (DA) polishing machines generally, not only ZviZZer-branded units. As long as your DA machine accepts a 150 mm backing plate, the interface pad will fit between the plate and your chosen F or M pad.
What speed range should I run when using this interface pad?
ZviZZer specifies this soft interface pad for use at 1000 to 1800 rpm on eccentric machines. Staying within that range keeps the foam working as intended and prevents overheating the pad or the surface.
What polishes are suitable when using this interface pad?
It is intended for use with glass and grinding polishes on eccentric machines. The soft hardness helps moderate the cutting force of more aggressive compounds so you retain correction ability without overdoing the abrasion on the panel.
Why does the interface pad have a hole in the centre?
The inner hole is there to relax the foam. Without it, the foam under a spinning pad can compress unevenly, creating a stiff spot in the middle. The hole allows the foam to flex more naturally, which keeps pressure distribution consistent across the full face of the pad.
Can I use this interface pad with rotary polishers?
No. ZviZZer specifies this pad for eccentric (DA) polishing machines only. Rotary machines apply torque differently and the interface pad is not rated or designed for that type of motion.
How do I clean and maintain the interface pad?
After each session, rinse the interface pad with warm water to remove compound residue, then press out excess water gently and allow it to air dry fully before storing. Avoid harsh solvents that could break down the open-pore foam structure. Store it flat or in a pad case to prevent compression setting.