Zvizzer Medium Cut MC 3000
R 490.00
- Removes moderate scratches and P3000 sanding marks
- One-step correction with high-gloss finish
- Compatible with DA orbital and rotary polishers
- Silicone-free, filler-free, body-shop safe formula
- Cuts up to P3000 sanding marks in one step
- Refines to a near-finish gloss without a follow-up polish
- No fillers, silicone or solvents - permanent correction
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,525.00
One-Step Correction
Cut and finish without switching compounds
MC 3000 packs enough cut to handle moderate swirl marks and P3000 sanding marks while its uniform abrasive particle structure breaks down to a high-gloss finish in the same pass - fewer steps, less time on the machine.
Why MC 3000
Built for real correction, not compromise
Four reasons detailers reach for MC 3000 first.
-
Medium Cut, One Step
Removes moderate scratches and P3000 sanding marks without needing a separate finishing polish on most paints.
-
High-Gloss Finish
Uniform abrasive particles break down cleanly, leaving a near-finish gloss in the same polishing stage.
-
Filler-Free Formula
No fillers, silicone or solvents means the correction is permanent and the surface is ready for ceramic or sealant.
-
DA and Rotary Ready
Optimised for both machine types so you can dial aggression up or down without changing your compound.
MC 3000 vs Generic Compound
How does MC 3000 stack up?
Here is how MC 3000 compares to a typical mid-range compound - the kind you find at most motor spares stores - across the criteria that matter most during a correction job.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Removes P3000 sanding marks | Yes | Yes |
| Filler-free permanent correction | Yes | No |
| Silicone and solvent free (body-shop safe) | Yes | No |
| Optimised for both DA and rotary | Yes | Yes |
| Refines to near-finish gloss in one stage | Yes | No |
| Safe on fresh and fully cured clear coats | Yes | Yes |
Body-Shop Safe
Permanent results, no hidden fillers
With no silicone, solvents or fillers in the formula, every panel MC 3000 touches is genuinely corrected - not masked. That means you can go straight to ceramic, sealant or clear coat after polishing with full confidence in what is underneath.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What defects can the MC 3000 remove?
MC 3000 is rated for moderate scratches, swirl marks and sanding marks up to P3000 grit. It is not designed for deep scratches that catch a fingernail - for those you would need a heavier compound first.
Which polisher should I use with MC 3000?
Zvizzer has optimised MC 3000 for both dual-action (orbital) and rotary polishers. On a DA you get a safer, more forgiving correction pass; on a rotary you get faster cut on stubborn marks. The compound performs well on both.
Which pad does Zvizzer recommend with this compound?
Zvizzer recommends pairing MC 3000 with their Red Thermo Pad or a wool pad for best cutting performance. A medium foam pad works well on DA polishers where you want slightly less aggression.
Is MC 3000 safe on fresh paint or wraps?
Yes - MC 3000 is formulated to be safe on both fresh and fully cured paint systems, including modern clear coats. It is silicone-free and solvent-free, so it is suitable for body-shop environments. It is not designed for PPF or vinyl wraps.
Does MC 3000 contain fillers?
No. MC 3000 is a filler-free formula, which means the gloss and correction you see after polishing is permanent, not masked. This makes it reliable before ceramic or paint protection film application.
How do I apply MC 3000 correctly?
Apply a small amount of compound to the pad and spread it across the panel at low machine speed to avoid flinging product. Increase speed and work with light, consistent pressure until the compound breaks down and hazes clear. Wipe the residue off with a clean microfibre cloth. Work one panel at a time.
Can I apply a ceramic coating or wax directly after using MC 3000?
Yes. Because MC 3000 contains no fillers or silicone, the corrected surface is clean and ready for a ceramic coating, sealant or wax once you have wiped the panel down with a panel wipe or IPA solution. No additional decon step is required unless the paint is otherwise contaminated.
What finish level does MC 3000 leave behind?
MC 3000 is designed to leave a near-finish, high-gloss surface after a single polishing stage. On softer paints and with a DA polisher it can finish down well enough to go straight to protection. On harder paints or after heavy correction you may want one pass with a dedicated finishing polish to maximise gloss depth before ceramic application.