Work Stuff One-Step Pad: 3 Inch
R 180.00
- Cuts and finishes in a single pass
- Medium-hard closed-cell foam holds form throughout
- Side slant reaches tight panels and edges easily
- Central hole disperses heat and aids alignment
- Cuts swirls and refines to gloss in one pass
- Side slant accesses tight spots other pads miss
- Central hole keeps foam cooler, extends pad life
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 19,450.00
One Pad, One Pass
Correct and refine without swapping pads
The Work Stuff Basic One-Step Pad's medium-hard closed-cell foam is tuned to cut light to moderate defects and leave a refined, glossy finish in the same buffing stage. You run your correction pass and your finishing pass at the same time, which means less machine time, fewer pads on the trolley and a cleaner workflow.
Why It Works
Professional results, simpler process
Engineered to cut the stages without cutting corners.
-
Cut and Finish Together
Medium-hard foam corrects swirls and refines to a gloss finish in a single buffing pass.
-
Consistent Foam Performance
Closed-cell construction holds its density throughout the job so cut and gloss stay predictable from start to finish.
-
Cooler, Longer Sessions
The central ventilation hole disperses heat from the foam core, reducing pad glazing and extending the pad's working life.
-
Reach Every Panel
Side-slant edge design lets you work door edges, mirrors and tight creases without repositioning the machine awkwardly.
How It Stacks Up
Basic One-Step Pad vs. a standard foam cutting pad
Most correction jobs use a separate cutting pad and a separate finishing pad. Here is how the Work Stuff One-Step Pad changes that equation compared to a typical single-purpose cutting pad.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Cuts and finishes in one pass | Yes | No |
| Central hole for heat dissipation | Yes | No |
| Side-slant edge for tight panel access | Yes | No |
| Removes light to moderate swirl marks | Yes | Yes |
| Velcro backing for standard backing plates | Yes | Yes |
| Suitable for very heavy paint correction alone | No | No |
Built for Tight Spots
Side slant and central hole for smarter polishing
The angled side profile reaches into door handles, mirror bases and panel creases that flat pads simply skip, while the central ventilation hole keeps the foam cooler across long correction sessions. Whether you are working a full decon and correction detail or touching up a single panel, the pad stays consistent from first pass to last.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine polisher is this pad compatible with?
The 3-inch (80/90/20 mm) pad suits any dual-action or rotary polisher with a matching 3-inch backing plate. The high-grammage Velcro backing grips securely, so there is no slippage at higher speeds or on tighter passes.
What type of compound or polish works best with this pad?
Pair it with a one-step product - a compound-polish hybrid that both cuts and finishes. Because the pad's medium-hard foam handles correction and refinement in a single stage, a dedicated one-step liquid lets you get the most from that single-pass approach. Avoid heavy cutting compounds intended for very aggressive cut pads, as the medium-hard foam will work the product faster than expected.
Can this pad remove heavy swirl marks and scratches?
The medium-hard structure handles light to moderate paint defects comfortably. For very deep scratches or heavy oxidation you may need a more aggressive cutting pad first, then switch to this pad for the finishing pass. On softer paints it will cut more aggressively, so start with light pressure and a slower machine speed to gauge the results.
Is the pad safe on all paint types, including single-stage and soft clearcoats?
Yes, but adapt your technique to the paint hardness. On soft or single-stage paint, reduce machine speed and pressure - the closed-cell foam holds its structure firmly, so it can cut deeper than expected on delicate surfaces. On harder OEM clearcoats it performs best at medium to high speed.
What does the central hole actually do during polishing?
The central hole allows heat generated between the pad and the paint surface to escape rather than build up in the foam core. This keeps both the pad and the paint cooler during extended correction work, reduces the risk of pad glazing, and extends the usable life of the foam.
How do I clean and care for this pad?
Clear product build-up from the face of the pad during use with a pad cleaning brush or compressed air. After the job, wash the pad by hand with a pad-cleaning solution or mild soap, gently working the foam to release trapped product. Rinse thoroughly and allow to air dry face-up before storing. Avoid wringing or twisting the foam as this damages the closed-cell structure.
Can I use this pad with a ceramic coating or sealant topper?
This pad is designed for the correction and polishing stage. Once you have finished polishing, remove all compound residue from the paint before applying a ceramic coating, sealant or wax. Do not apply coatings through this pad - use a dedicated applicator or coating sponge for that step.
How does the side-slant design help in practice?
The angled edge profile lets you tilt the backing plate and work the pad into door handles, bumper creases, around mirrors and along panel edges without the flat face of the pad lifting off the surface. On a standard flat pad those areas either get skipped or require awkward machine angles - the side slant sorts that without needing a second tool.