Sibusiso K.
Verified
Tar spots on the rocker panels came off without any effort. One spray, a minute's dwell, and a wipe - done. Exactly what this stage of the decon process should look like.
Vonixx Strike Tar and Adhesive Remover 500ml
R 285.00
- Dissolves tar, adhesive and road contamination
- Safe on paint, trim and glass surfaces
- 500ml bottle suits professional and frequent use
- Essential pre-decon step before clay or correction
- Dissolves tar and adhesive without scrubbing
- Safe on paint, glass and exterior trim
- 1.5L size built for professional-volume work
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 985.00
Targeted Decon
Tar and adhesive gone without the marring risk
Strike does the heavy lifting on bitumen spots, badge adhesive and road contamination that a shampoo will never touch, without you having to scrub and risk scratching the paint in the process.
Why Strike
Purpose-Built Contamination Removal
The right chemistry for the job, in the right volume.
-
Penetrating Formula
Breaks down tar and adhesive at the bond so it lifts cleanly without scrubbing.
-
Paint Safe
No abrasives or harsh agents that would scratch or dull your paintwork.
-
Full Decon Ready
Pairs with iron fallout removers and clay for a complete pre-correction prep stage.
-
Fast Acting
Short dwell time gets contamination lifting in under a minute on most deposits.
Strike vs Generic Alternatives
Not all tar removers are the same
A lot of products claim to remove tar. The difference shows in how cleanly they lift, whether they leave residue behind, and how they behave on paint and trim.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Dedicated tar and adhesive formula | Yes | No |
| Safe on paint, glass and exterior trim | Yes | Yes |
| Ready to use, no dilution needed | Yes | Yes |
| No abrasive content that risks marring | Yes | No |
| 1.5L professional-volume format available | Yes | No |
| Suitable as a pre-coating decon step | Yes | No |
Pro-Grade Volume
1.5L built for detailers who work daily
The 1.5L format means you are not rationing every spray - use Strike freely across a full vehicle or run through a fleet without reaching for a new bottle halfway through the job.
Reviews
What our customers say
4.7
Based on 5 reviews
Nadia E.
Verified
Good product, lifts tar reliably. On really old deposits you might need two passes, but that's expected. The 1.5L bottle is worth it if you detail more than one car a week.
Pravin G.
Verified
Badge adhesive left over from a respray was giving me trouble. Strike dissolved it in about 45 seconds flat - no heat gun needed. Packaging arrived in good shape too.
Kgothatso B.
Verified
Part of every full detail I do now. Running Strike before the iron remover keeps the clay bar cleaner and cuts the whole decon time down. The 1.5L lasts a good while.
Marlize J.
Verified
Smells strong, so work with the windows open or outdoors. That aside, it shifts tar and sticky residue better than anything else I've tried at this price point. 😊
Questions
Frequently asked
How do I apply Vonixx Strike?
Spray Strike directly onto the tar spot or adhesive residue, allow it to dwell for 30 to 60 seconds so it can penetrate and loosen the contamination, then wipe away with a clean microfibre cloth. For heavy deposits, a second application may be needed before wiping.
Is Strike safe on all paint types, including dark and metallic finishes?
Yes. Strike is formulated to be safe on painted surfaces including dark, metallic and pearl finishes. As with any chemical, avoid prolonged contact and wipe away promptly once the tar or adhesive has lifted.
Can I use Strike on glass and exterior trim?
Strike is safe on glass and most exterior plastic and rubber trim. If you are unsure about a specific trim piece, test on a small, inconspicuous area first before treating the full surface.
Does Strike need to be diluted before use?
No. Strike is a ready-to-use formula - apply it straight from the bottle without dilution.
How long should I leave Strike to dwell?
A dwell time of 30 to 60 seconds is generally sufficient for standard tar and adhesive deposits. Heavier or older contamination may benefit from a slightly longer dwell, but do not allow the product to dry on the surface.
Where does Strike fit in my decon process?
Use Strike as the first chemical decon step after your initial rinse. Remove tar and adhesive with Strike first, then follow up with an iron fallout remover before clay barring. This order keeps your clay bar cleaner for longer and reduces the risk of marring.
Can I use Strike before applying a ceramic coating or PPF?
Absolutely. In fact, this is one of the most important use cases. Removing all tar and adhesive contamination before a ceramic coating or PPF installation ensures proper bonding and a clean substrate. Follow Strike with a full decon wash and panel wipe before coating.
Will Strike strip existing wax or sealant coatings?
Strike is a solvent-based remover and may reduce the hydrophobic properties of wax or sealant in the areas where it is applied. It is best used during a full decon stage where you plan to reapply protection afterwards, rather than as a spot treatment on a freshly sealed car.