Rohan N.
Verified
Purple everywhere on the first spray - the wheels were far worse than I thought. Rinsed off clean and the clay bar barely picked up anything afterwards. Solid product.
Vonixx Izer Iron Fallout Remover 3L
R 825.00
- Dissolves iron fallout and brake dust on contact
- Sturns purple as it reacts no guesswork
- Safe on paint, wheels, glass and trim
- Essential first step in any decon process
- Bleeds purple on iron - see the reaction in real time
- Lifts fallout clay and washing cannot remove
- Rinse-off clean on paint, wheels and glass
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,175.00
Chemical Decon
See the contamination. Rinse it away.
Izer turns purple the moment it contacts embedded iron particles, giving you a real-time map of fallout on your paint, wheels and glass. No scrubbing, no guessing - just a dwell, a rinse and a properly decontaminated surface ready for correction or protection.
Why Izer
Decon done properly
Four reasons it earns a place in every detail.
-
Reactive Colour Change
Turns purple on contact with iron so you can see exactly where contamination sits.
-
Multi-Surface Safe
pH-balanced formula is safe on clear coat, alloys, glass and hard plastic trim.
-
Cleaner Correction Results
Removing iron before polishing prevents drag-marring and improves compound cut.
-
Stronger Coating Bond
A decontaminated surface lets sealants and ceramics bond fully and last longer.
Izer vs. Basic Wash
Why a shampoo alone does not finish the job
A good shampoo removes loose dirt and some surface grime, but it cannot dissolve iron particles that have mechanically bonded into the surface. Here is how Izer compares to stopping at the wash stage.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Removes embedded iron fallout | Yes | No |
| Colour-reactive to show contamination | Yes | No |
| Safe on paint, wheels and glass | Yes | Yes |
| No mechanical abrasion needed | Yes | Yes |
| Prepares surface for coating or sealant | Yes | No |
| Removes tar and wax deposits | No | No |
Better Prep. Better Results.
The step that makes everything else work harder.
Whether you're laying down a ceramic coating, applying a sealant or heading into paint correction, the quality of your decon stage determines how well the next product performs. Izer pulls out the iron contamination that washing and clay miss, so your protection bonds properly and your correction compounds cut on a truly clean surface.
Reviews
What our customers say
4.7
Based on 3 reviews
Fatimah I.
Verified
Works as advertised. The smell is something you need to prepare for - do it outside with a breeze. Contamination lifted well and the paint felt noticeably smoother before I even touched the clay.
Kabelo V.
Verified
Before coating any client's car this is the step I no longer skip. Packaging arrived in good shape from Detailer SA and the product does exactly what a fallout remover should.
Questions
Frequently asked
What surfaces can I use Vonixx Izer on?
Izer is safe on clear-coated paint, bare and coated alloy wheels, glass and hard plastic trim. Avoid prolonged contact with raw aluminium, polished metal or exposed bare metal, as the reactive chemistry can cause discolouration on unsealed surfaces.
How long should I leave it to dwell?
Allow 3 to 5 minutes of dwell time. You will see the product bleed purple where it contacts iron contamination - that colour change is the reaction working. Do not let the product dry on the surface; if it starts to dry, mist with water to keep it active, then rinse off completely.
Do I need to wash the car before applying Izer?
Yes. Always start with a thorough pre-wash or snow foam rinse to remove loose dirt and grime. Applying a fallout remover to a dirty surface wastes the product and reduces its effectiveness against bonded iron particles.
Will Izer replace the need for clay barring?
No - Izer and clay bar do different jobs. Izer dissolves iron-based contamination chemically, while a clay bar physically removes bonded surface contaminants like tar, industrial deposits and overspray. For a thorough decon stage, use Izer first, rinse, then clay. Your clay bar will last longer and glide more easily after a proper iron decon.
Is Izer safe to use on ceramic-coated paint?
Yes. Regular iron decon is actually recommended as part of maintenance for ceramic-coated vehicles, since iron particles bond to coatings just as they do to bare paint. Izer will not strip or damage a properly cured ceramic coating.
Can I use Izer on my wheels alongside the paint?
Absolutely - wheels are often the heaviest source of iron contamination due to brake dust. Apply Izer to the wheel face, barrel and arches, let it dwell and react, then rinse thoroughly before washing down as normal.
How does Izer affect paint correction or coating prep?
Removing iron fallout before polishing gives your compound a clean surface to work on, reducing the chance of iron particles dragging under the pad and causing additional marring. Before applying a ceramic coating or sealant, a full decon stage including Izer is essential for proper bonding and long-term durability.
What is the smell like, and is it safe to use at home?
Like most reactive fallout removers, Izer has a distinct sulphurous smell during the chemical reaction - this is normal and is the compound bonding with iron. Use it in a well-ventilated area, avoid breathing the vapour directly, and rinse the surface thoroughly after treatment. Wear gloves and eye protection as a precaution.