Rupes DA Ultrafine Microfibre Pad: 3 Inch
R 230.00
- Boosts ultra-fine polish cut on hard clear coats
- Pairs perfectly with Rupes UNO Pure and UNO Protect
- Unique microfibre face over ultra-soft foam interface
- Consistent, clear finish on medium-to-hard paint
- Boosts cut of ultra-fine polishes on hard clear coat
- Delivers a consistent, clear finish after correction
- Soft foam interface keeps pressure even on the panel
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,320.00
More Cut, Less Passes
Ultrafine Microfibre That Works Harder on Hard Paint
Standard foam finishing pads can struggle to shift swirl marks and haze from hard clear coats. The Rupes DA Ultrafine Microfibre Pad's unique fibre face grips and works the abrasives more effectively, so you get more defect removal from the same ultra-fine polish without adding a heavier correction step.
Why This Pad
Engineered for the UNO System
More cut from ultra-fine polishes, with a finish to match.
-
Boosted Cutting Power
Microfibre face increases defect removal from ultra-fine polishes on hard clear coat.
-
Ultra-Soft Interface
Extremely soft foam backing keeps pad pressure even to protect the clear coat throughout.
-
Clear, Refined Finish
Leaves a consistent, clear result on medium-to-hard clear coats after the correction pass.
-
One-Step Compatible
Works with Rupes UNO Protect to correct, polish and protect in a single application.
How It Compares
Ultrafine Microfibre vs. Generic Foam Finishing Pad
A standard foam finishing pad gets you a refined gloss but leans heavily on the polish to do the cutting work. Here is how the Rupes Ultrafine Microfibre Pad stacks up against a typical budget foam finishing pad.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Works on medium-to-hard clear coat | Yes | Yes |
| Compatible with standard DA polishers | Yes | Yes |
| Microfibre face boosts cut from ultra-fine polish | Yes | No |
| Soft foam interface for even pressure distribution | Yes | No |
| One-step correct and protect capability | Yes | No |
| Optimal on very soft or water-based paints | No | Yes |
One Step Done Right
Correct, Polish and Protect in a Single Pass
Paired with Rupes UNO Protect, this pad lets you remove moderate defects, refine the surface and lay down a durable polymer protection layer in one go - no pad swap, no extra step, no compromise on the finish clarity.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which polishes work best with this pad?
Rupes designed this pad specifically for their UNO system. Pair it with Rupes UNO Pure for defect removal and gloss, or use it with Rupes UNO Protect for a one-step correction and polymer-protection pass. Other ultra-fine polishes can work, but the pad's cut level is calibrated around low-abrasion products.
What machine does this 3-inch pad fit?
It is designed for DA polishers fitted with a 3-inch backing plate. This is a compact pad size suited to smaller DA machines or mini polisher heads used for tight panels, door jambs, pillars, and intricate bodywork.
How much polish should I apply?
Because of the microfibre face, start conservatively - three to four small dots across the pad face is usually enough for a typical working section. Over-loading the pad with product can reduce the microfibre's ability to grip and move the polish effectively.
Does the microfibre face increase the risk of marring?
Not on medium-to-hard clear coats when used as directed with an ultra-fine polish. The soft foam interface keeps pressure consistent, and the microfibre is specifically rated as ultrafine. On very soft or sensitive paints, do a test spot first before committing to a full panel.
What paint types is this pad suited to?
It is rated for medium-to-hard clear coats. If your paint is very soft, the boosted cut of the microfibre face may leave traces that need a follow-up foam finishing pass. On hard factory or ceramic-coated paint, this pad is a strong choice for the final correction or one-step step.
How do I clean the pad after use?
Rinse the microfibre face with warm water during and after use to release spent polish. A pad-cleaning brush or pad washer works well to open the fibres back up. Allow the pad to air-dry fully before storing or reusing - storing it damp can cause the foam interface to degrade faster.
Can I use this pad with a rotary polisher?
This pad is a DA (dual-action) pad. Using it on a rotary machine is not recommended, as rotary heat and friction are different from what the pad's microfibre face and foam interface are engineered for. Stick to DA machines for consistent results and pad longevity.
How does this pad differ from a standard foam finishing pad?
A standard foam finishing pad relies entirely on foam to move the polish. The microfibre face on this pad physically works the abrasives more, giving you noticeably more cut from the same ultra-fine polish. You still get a clear, refined finish, but with more defect removal in a single pass - useful on hard paint that resists standard foam finishing pads.