Rupes DA Coarse High Performance Cutting Foam Pad: 2 Inch
R 900.00
- Compatible with RO and gear-driven machines
- Open-cell foam removes mild to severe defects
- Combines cut and finish in one pad
- Increased durability over previous blue and green foams
- Cuts mild to severe defects on RO and gear-driven tools
- Open-cell foam improves cut and finishing in one step
- More durable than the previous blue and green foams
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 19,164.00
Serious Correction
One pad from heavy defects to a refined finish
The Rupes DA Coarse 2-inch cutting pad uses an all-new open-cell foam that bridges the gap between aggressive cut and a workable finish. Whether you are on a random orbital or a gear-driven machine, it loads compound evenly and works through defect removal without loading up or glazing over.
Why This Pad
Correction that works with your machine, not against it
Open-cell foam engineering for RO and gear-driven tools.
-
RO and Gear-Driven Ready
Designed from the ground up to perform on both random orbital and gear-driven polishers without compromise.
-
New Open-Cell Formula
The updated foam structure distributes compound evenly across the pad face for consistent cut on every pass.
-
Cut Meets Refinement
Combines the cutting ability of the old blue foam with the finishing traits of the green in a single pad.
-
Increased Durability
Tougher foam construction means the pad holds its shape and cutting ability over more correction sessions.
How It Compares
Rupes DA Coarse vs a generic cutting pad
Not all cutting pads are the same. Here is how the Rupes DA Coarse pad stacks up against a typical budget foam cutting pad in the same size class.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Compatible with RO and gear-driven tools | Yes | Yes |
| Removes mild to severe paint defects | Yes | Yes |
| Open-cell foam for even compound distribution | Yes | No |
| Combines cut and finishing in one pad | Yes | No |
| Engineered to pair with a matched compound | Yes | No |
| Improved durability over previous generation | Yes | No |
Built to Last
More cuts per pad than the generation before it
Rupes redesigned the foam compound to deliver greater durability than both the previous blue and green pads. That means fewer pad changes during a correction job and more consistent performance from the first panel to the last.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which machines is this pad compatible with?
The Rupes DA Coarse 2-inch pad is designed to work with both random orbital and gear-driven polishers. It is not limited to Rupes machines - any random orbital or gear-driven tool that takes a 2-inch pad will work.
What compound should I pair this pad with?
Rupes recommends pairing it with the Rupes DA Coarse compound. That combination is specifically tuned to deliver improved cutting efficiency and finishing ability. You can use it with other compounds, but the DA Coarse compound is the intended match.
What level of paint defects can this pad remove?
The pad is rated for mild to severe defects on most paint systems. That covers light swirl marks and water spots at the mild end, through to deep scratches and heavy oxidation at the severe end. The actual result will depend on the compound you pair it with and the condition of the paint.
Is this pad safe on soft or hard paint?
The open-cell foam is designed for most paint systems, but as with any cutting pad, start with light pressure and low speed to assess how the paint responds. Softer paints may show holograms if you run the machine at high speed with heavy pressure for too long - refine with a lighter pad if needed.
How does this pad differ from Rupes's previous blue and green foam pads?
Rupes designed this new pad to combine the best cutting characteristics of their previous blue foam with the finishing qualities of the green foam, while adding increased durability. The result is a single pad that handles more of the correction process without needing to swap pads mid-job.
What is the correct prime and priming process for this pad?
Before first use, prime the pad by applying a small amount of compound to the face and spreading it across the foam by hand or at low machine speed. This prevents the dry foam from absorbing too much product on the first pass and ensures even distribution from the start.
How do I clean and care for this pad after use?
Remove excess compound with a pad cleaning brush or compressed air during the job to prevent loading. After each session, wash the pad with a dedicated pad cleaner or mild detergent, work it through the foam gently, rinse thoroughly, and allow it to air dry fully before storing. Avoid wringing the foam aggressively as this can tear the open-cell structure.
What size backing plate do I need for this 2-inch pad?
A 2-inch pad pairs with a matching 2-inch backing plate. This is a compact size suited to smaller polishers and spot correction work. Make sure your backing plate diameter does not exceed the pad diameter, as an oversized plate will damage the pad edge and affect cutting performance.