Pads 99 Yellow Twister Pad: 5 Inch Medium/One-Step Pad
R 165.00
- Medium cut with one-step finishing ability
- German-engineered foam construction
- Twister design for even compound distribution
- Fits standard 5-inch backing plates
- Cuts and refines in a single polishing pass
- Twister profile spreads compound evenly across the face
- German-engineered foam built for consistent correction
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,292.00
One Step. Clean Finish.
Cut and refine without swapping pads
The Yellow Twister's medium foam density handles light swirls and refinement in the same pass - so you spend less time cycling through pad grades and more time getting panels ready for protection.
Why Yellow Twister
One pad, multiple corrections handled
German engineering meets everyday detailing demands.
-
Medium Cut Power
Removes light swirls and oxidation without the aggression of a heavy cutting pad.
-
Refines as It Cuts
Leaves a finish ready for a topper without needing a separate refining pass on most paints.
-
Even Product Spread
Twister channels distribute compound across the face for consistent coverage panel to panel.
-
Durable Construction
German-made foam holds its density and rebound through repeated correction sessions.
How It Compares
Yellow Twister vs. a generic import foam pad
Not all foam pads are built the same. Here is how the Pads99 Yellow Twister stacks up against a typical budget import pad across the factors that matter on correction day.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Consistent foam density batch to batch | Yes | No |
| Twister profile for even compound distribution | Yes | No |
| Cuts light to moderate swirls | Yes | Yes |
| Compatible with standard 5-inch backing plates | Yes | Yes |
| Manufactured under strict quality controls | Yes | No |
| Available in multiple diameters and grades | Yes | No |
Built in Germany
Quality controls you can feel in the foam
Every Pads99 pad is manufactured in Germany under strict production standards. That means consistent foam density, reliable Velcro adhesion, and a pad that performs the same way on the twentieth car as on the first.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What type of polisher does this pad work with?
The Pads99 Yellow Twister is designed for dual-action (DA) polishers and is also compatible with forced-rotation machines. It fits any standard 5-inch (125mm) backing plate with a hook-and-loop (Velcro) interface.
What surfaces can I use this pad on?
This pad is intended for use on clear-coated paintwork - factory paint, respray finishes, and base/clear systems. It is not designed for use on glass, bare metal, raw plastic trim, or PPF without testing on a hidden area first.
What compounds or polishes work best with the Yellow Twister?
The yellow medium grade suits one-step polishes and light cutting compounds. It bridges the gap between a heavy cutting pad and a finishing pad, so it works well with products designed for light swirl removal and simultaneous refinement. Avoid heavy abrasive compounds - a denser orange or green pad handles those better.
How much polish should I prime the pad with?
Prime the pad with 3-4 pea-sized drops of product spread across the face before your first section. After that, use 2-3 drops per 40x40cm section. The twister profile helps distribute product, so you need less than you might expect.
How do I clean the pad between sections or after a job?
Between sections, brush out loaded product with a pad cleaning brush or blast it with compressed air while the machine spins at low speed. After the job, hand-wash with warm water and a mild pad-cleaning solution, squeeze gently (don't wring), and lay flat to dry. Do not put foam pads in a tumble dryer.
Can I use this pad on dark or black paint?
Yes. The medium cut is manageable on dark paint, but work at a lower speed and keep the machine moving to avoid localised heat buildup. Follow up with an inspection under a dedicated light source to confirm no micro-marring remains before applying a final protection layer.
How does the twister design affect performance?
The twister (trapezoid-contoured) profile creates channels across the pad face. These channels allow compound to migrate evenly, prevent the pad from loading up too quickly, and help maintain consistent surface contact across slightly contoured panels. It also assists with heat dissipation during heavier polishing passes.
How long should a Pads99 foam pad last before it needs replacing?
With proper care - rinsing after each use, avoiding wringing, and storing flat or on a pad holder - a quality foam pad like the Yellow Twister should last through many correction sessions. Replace it when the foam loses its rebound, develops tears, or when the hook-and-loop backing begins to delaminate.