Pads 99 White Space Pad: 5 Inch Finishing Pad
R 165.00
- 5-inch white foam finishing pad
- German-manufactured under strict quality control
- Paired for light polishing and LSP application
- Compatible with standard 5-inch backing plates
- Finishing foam for a swirl-free, high-gloss result
- 5-inch size fits standard DA and rotary plates
- German-manufactured to strict quality standards
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,292.00
German Engineering
Finishing-stage foam built to deliver a clean result
The Pads99 White Space Pad is manufactured in Germany under strict quality controls, giving you consistent foam density and cell structure across every pad. At the finishing stage there is no room for uneven product distribution or pad-induced marring, and this is where build quality counts.
Why Pads99
Built for the final pass
Precision foam that performs at the stage that matters most.
-
High-Gloss Finish
White foam compound delivers LSPs without marring or swirl introduction.
-
Standard 5-Inch Fit
Fits any 5-inch backing plate for DA or rotary use.
-
Made in Germany
Strict manufacturing controls ensure consistent foam density in every pad.
-
Gentle on Paint
Soft finishing cell structure is safe on corrected clear coat and PPF.
Pads99 vs Generic Alternatives
What you are actually paying for
Not all finishing pads are built to the same standard. Here is how the Pads99 White Space Pad stacks up against a typical budget alternative.
| Feature | DetailerSA | Alternative |
|---|---|---|
| German manufacturing with quality controls | Yes | No |
| Consistent foam density pad to pad | Yes | No |
| Compatible with DA and rotary machines | Yes | Yes |
| Safe for use on clear coat and PPF | Yes | Yes |
| Available in multiple diameters across the range | Yes | No |
| Budget entry-level price point | No | Yes |
Last-Step Ready
Apply any LSP with confidence
Whether you are laying down a carnauba wax, a synthetic sealant or a ceramic-infused spray, the white finishing foam holds and releases product evenly. The result is a uniform coat that flashes cleanly and buffs to a deep, clear gloss.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine types is this pad compatible with?
The Pads99 White Space Pad is designed for use with both dual-action (DA) polishers and rotary machines fitted with a standard 5-inch backing plate.
What products should I use with a white finishing pad?
White finishing pads are best paired with glazes, liquid or paste waxes, paint sealants, and ceramic-infused spray coatings. They are not the right choice for cutting compounds or heavy correction work - use a more aggressive pad for that stage, then switch to the white for the last step.
Can this pad be used on clear coat, single-stage paint, and PPF?
Yes. The white finishing foam is gentle enough for clear coat, single-stage paint, and PPF surfaces. Always test on a small area first, particularly on matte or satin finishes, as machine-applied products can alter the sheen of those surfaces.
What speed setting should I use on my DA polisher?
For LSP application, a low to medium speed setting is sufficient - typically speed 2 to 4 on most DA polishers. Higher speeds are unnecessary and can cause product to sling off the pad before it is worked in properly.
How do I prime the pad before use?
Lightly mist the pad with water before the first use to open the foam. Apply a few pea-sized dots of your chosen product directly to the pad, then work it into the foam at low speed before moving to the panel. Priming prevents the pad from absorbing too much product on the first pass.
How do I clean and maintain the pad after use?
Rinse the pad under warm water immediately after use and work out any product residue by hand. For a deeper clean, use a pad-washing brush or a dedicated pad cleaner. Rinse thoroughly and allow the pad to air-dry completely before storage. Avoid wringing the foam as it can tear the cell structure.
Can I layer products using this pad, for example applying a second coat of sealant?
Yes. If you are applying multiple coats of a sealant or wax, allow each coat to flash fully before buffing and reapplying. Check the product's flash time and cure requirements - some sealants need a minimum cure window before a second layer will bond correctly.
How does this pad fit into a full paint correction process?
The white finishing pad is the last pad in the process. Complete your correction stages with appropriate cutting and polishing pads first, then switch to the white pad to apply your chosen LSP. This ensures you protect the corrected finish rather than working on a contaminated surface.