Pads 99 Classic: 3 Inch Black Finishing Pad
R 100.00
- 3-inch diameter for targeted finishing work
- Black foam formulated for final-stage gloss
- Made in Germany under strict quality control
- Classic hole-free design suits rotary machines
- Final-stage gloss with zero new defects
- Hole-free design built for rotary machines
- German manufacturing, strict quality control
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 9,420.00
German Foam Pads
Final-stage gloss, built in Germany
The Pads99 Classic Black Finishing Pad is engineered for one job: maximum gloss on the last polishing pass. The black foam cell structure holds finishing polish evenly across the pad face, releasing it progressively so you get a consistent, swirl-free result without spending extra correction steps cleaning up pad marks.
Why Pads99 Classic
Four reasons it earns a spot in your kit
Specific advantages for professional and enthusiast detailers
-
Gloss-ready finish
Black foam delivers a refined, high-gloss result ready for wax, sealant or ceramic without additional steps.
-
Rotary-ready design
The classic hole-free backing suits rotary polishers where ventilated pad designs can create wobble at higher RPM.
-
German quality control
Every pad is manufactured in Germany under strict production standards, so consistency is built in, not hoped for.
-
Lightweight precision
At 3 inches, the pad gives you fine control on tight sections without overloading a small backing plate or machine.
How It Stacks Up
Pads99 Classic vs. a typical generic finishing pad
Not all finishing pads are the same. Here is how the Pads99 Classic 3-inch holds up against a standard generic pad from a non-specialist supplier.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Made in Germany | Yes | No |
| Hole-free rotary-compatible design | Yes | No |
| Available across a full range of diameters (35-180 mm) | Yes | Yes |
| Safe to use on all paint colours | Yes | Yes |
| Colour-coded by cut level | Yes | No |
| Premium price point | No | No |
Precision Where It Counts
3-inch reach for the spots others miss
At 3 inches, this pad handles the panel sections that larger pads simply cannot reach cleanly - pillars, bumpers, curved edges and door shuts. Pair it with any 3-inch backing plate on a rotary or DA and you have a precise, controllable finishing tool that slots naturally into a professional correction workflow.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What polishing stage is this pad designed for?
The black foam indicates a finishing pad, so it is best suited to the final polishing stage. Use it with a light finishing polish or glaze after any heavier correction work has already been done. It is not designed to cut or remove heavy defects.
Which machine polisher does this pad work with?
The classic hole-free design is built for rotary machines, but the 3-inch diameter is also compatible with most dual-action (DA) and gear-driven polishers that accept a 3-inch backing plate. Check your machine's backing plate size before ordering.
Can I use this pad on all paint types, including dark and ceramic-coated cars?
Yes. Because it is a finishing pad, it applies minimal abrasion and is safe on all paint colours including dark, black and silver finishes. It is also suitable for applying a finishing polish or light topper over a cured ceramic coating, as long as the polish you pair it with is coating-safe.
How much product should I apply to the pad?
Start with a small amount of finishing polish, roughly a pea-sized drop or a thin line across the pad face. Prime the pad on the first section, then use smaller amounts for subsequent sections. The black foam holds product well, so less is more to avoid excess residue.
What speed setting should I run when using this pad?
For finishing work, a low to medium speed is recommended. On a rotary, stay in the 900-1200 RPM range. On a DA, a setting of 3-5 out of 6 is typically sufficient. Higher speeds are unnecessary and can cause the polish to flash too quickly, reducing the gloss result.
How do I clean and care for this pad?
Rinse the pad with warm water during your session to keep the foam cells open. After use, wash it thoroughly with a pad cleaning brush or pad washer, rinse until the water runs clear, and allow it to air dry completely before storing. Avoid wringing the foam, as this can tear the cell structure.
Can I use this pad with a wax or sealant as well as a polish?
Yes. A black finishing pad is also commonly used to apply liquid waxes, sealants and light paint glazes by machine. Keep separate pads for polish and for protection products to avoid contaminating your polishing steps with wax residue.
How does the 3-inch size compare to larger pads in the Pads99 range?
The 3-inch pad excels on smaller, tighter areas such as pillars, bumper sections, door handles and curved body lines where a larger 5 or 6-inch pad would be unwieldy. Pads99 offers the Classic range in diameters from 35 mm all the way to 180 mm, so you can match the pad size precisely to the area you are working on.