Guaranteed safe checkout
Total price R 10,590.00
Keep Pads Performing
Loaded pads cut unevenly, reduce gloss output, and can introduce marring on paint that has already been corrected. ZviZZer Pad Cleaner strips polish residues quickly so your pads are ready to perform at full capacity, whether you are moving to the next polishing stage or wrapping up for the day.
Why ZviZZer Pad Cleaner
Four reasons to keep this in your detailing bay.
Removes compacted polish residue so your pad cuts and refines at its rated performance every pass.
Spray, agitate and rinse in minutes - no long wait between correction stages.
No dilution or mixing required - spray directly onto the pad face and get on with the job.
Regular cleaning prevents residue build-up that degrades foam cells and shortens pad lifespan.
How It Compares
Not all pad cleaners are designed with correction workflows in mind. Here is how ZviZZer Pad Cleaner stacks up against a generic alternative.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Ready-to-use spray format | Yes | Yes |
| Designed for professional correction pads | Yes | No |
| Suitable for intermediate cleaning between stages | Yes | Yes |
| Recommended by pad manufacturer for their range | Yes | No |
| Compatible with both Detailing and Professional line pads | Yes | No |
| Effective residue removal for end-of-job clean | Yes | Yes |
Built for the Pro Bay
Designed to work with both the ZviZZer Detailing Line and Professional Line, this Pad Cleaner is a standard part of a structured correction workflow. The 750ml spray bottle keeps application quick and controlled, so cleaning pads does not slow down the job.
Reviews
Excellent advice and products from the guys over at detailersa,As always Liam is my go to man and should be yours too!never let me down in getting the right stuff for the job,well priced too.
Questions
Spray the Pad Cleaner directly onto the face of the loaded pad, work it in with your fingers or a pad-cleaning brush to loosen the residue, then rinse with water or use a pad washer to flush it out. Wring out excess moisture before resuming polishing.
Yes. ZviZZer positions this product for both intermediate cleaning during a session and thorough cleaning at the end of the polishing work. For a deep clean, apply generously, agitate well, and rinse thoroughly before allowing pads to dry fully before storage.
It is designed for pads from both the ZviZZer Detailing Line and the Professional Line. If you are using other brand pads, it should still perform well as a general pad cleaner, but ZviZZer tests and recommends it specifically for their own range.
No dilution is required. The Pad Cleaner comes ready to use in a spray bottle. Simply spray it directly onto the pad face at the volume needed for the level of residue build-up.
After rinsing the pad properly following cleaning, there should be no Pad Cleaner residue left that would interfere with the polish or the paint. Always ensure the pad is well rinsed and not waterlogged before putting it back on the machine.
The product is described as a cleaner for polishing pads across the ZviZZer range, which includes foam pads. For microfibre pads, the same principle applies - spray, agitate and rinse thoroughly. Always rinse until the water runs clear to confirm the pad is fully clean.
For an intermediate clean between steps, a few sprays per pad is usually sufficient. A thorough end-of-job clean may require more applications and agitation. At 750ml per bottle, you will get a solid number of cleaning cycles per bottle depending on pad size and how loaded the pads are.
Keeping pads free of compacted polish residue helps them cut and refine as intended, prevents uneven loading, and reduces the mechanical stress caused by polishing with a clogged pad. Regular cleaning with a product like this will generally help pads last longer and maintain their performance across more correction sessions.
