Ernard Van Wyk
Verified
Absolutely game-changing. This compound removes moderate to light scratches, swirls and holograms, and leaves a great gloss. Highly recommend.
Zvizzer Medium Cut MC 3000
R 385.00
- Removes P3000 sanding marks in one pass
- Hologram-free finish with continuous grain breakdown
- Silicone-free, no fillers, water-based formula
- Safe on all paint types including scratch-resistant and fresh lacquer
- Homogeneous grain breaks down for a hologram-free finish
- Cuts and refines P3000 sanding marks in one pass
- High-gloss result on all paint types, no fillers
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,255.00
One Step. Done.
Cut and gloss in a single polishing cycle
Most P3000 correction workflows involve a cut stage followed by a separate refining stage. MC 3000 collapses that into one operation by using a homogeneous grain that progressively breaks down as you polish, delivering genuine correction and a high-gloss, hologram-free finish without changing pads or reaching for a second product.
Why MC 3000
Precision medium-cut performance
Everything a one-step correction polish should do.
-
Continuous grain breakdown
The homogeneous abrasive refines itself during polishing so you cut and gloss in the same step.
-
Hologram-free result
MC 3000 leaves a clean, high-gloss finish with no buffer trails or holograms on completion.
-
All paint compatible
Safe on standard, scratch-resistant, fresh, and fully cured lacquers without adjustment.
-
Coating-ready surface
Silicone-free and filler-free, so the corrected finish is genuinely ready for sealant or ceramic.
MC 3000 vs. Typical Medium-Cut Polish
What sets MC 3000 apart
There are plenty of medium-cut polishes on the market. Here is how MC 3000 stacks up against a typical two-step alternative on the features that matter in a correction workflow.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Cuts and refines in one step | Yes | No |
| Hologram-free finish without a refining stage | Yes | No |
| Silicone-free and filler-free formula | Yes | No |
| Compatible with all paint types including scratch-resistant | Yes | Yes |
| Suitable for machine application | Yes | Yes |
| Available in professional 750ml size | Yes | Yes |
Clean Formula
No silicone, no fillers, no compromises
MC 3000 is water-based and completely free of silicone and fillers, so the gloss you see after polishing is real correction. That clean chemistry also means it is safe in body shop environments and leaves the surface properly prepared for any protection layer you apply next.
Reviews
What our customers say
5.0
Based on 1 reviews
Questions
Frequently asked
What grit level does MC 3000 correct?
MC 3000 is formulated specifically to remove sanding marks from P3000 grit and finer. It is not intended for heavier scratch removal that would require a coarser compound first.
Does MC 3000 leave holograms or buffer trails?
No. The homogeneous sanding grain in MC 3000 breaks down continuously as you work, so the abrasive refines itself during polishing. This is what allows it to cut and gloss in a single step without leaving holograms.
What machine and pad combination works best with MC 3000?
ZviZZer recommends medium-soft polishing sponges with medium cutting properties. A dual-action polisher is a good starting point. Begin spreading at around 1,000 rpm, then work the defect at approximately 1,800 rpm with light pressure.
Is MC 3000 safe on scratch-resistant or ceramic-coated paint?
Yes, the product is stated as compatible with scratch-resistant paint and both fresh and fully cured lacquers. It is not specifically formulated to cut through a ceramic coating, so on coated vehicles you would typically be working on any remaining exposed clear coat or after decon and coating removal.
Does MC 3000 contain silicone or fillers?
No. The formula is completely silicone-free and contains no fillers. It is water-based. This makes it suitable for use in body shop environments where silicone contamination is a concern, and the result you see is real correction, not a filled finish.
Can I apply MC 3000 by hand?
The product is designed for machine application where the continuous grain breakdown works best under polishing motion. Hand application will not generate the RPM needed for the grain to break down fully, so results will be limited compared to machine polishing.
What sizes does MC 3000 come in?
MC 3000 is available in 250ml and 750ml containers, so you can pick up the smaller size to test compatibility with your paint system before committing to the larger bottle.
Can I follow MC 3000 with a ceramic coating or sealant?
Yes. Because the formula is silicone-free and filler-free, the surface left behind after polishing is clean and ready for a sealant, wax, or ceramic coating. Always wipe down with an IPA solution before coating application to remove any residual polish oils.