Thabo G.
Verified
CUT pad on the Rupes 21 cleared heavy swirls on a dark blue sedan in two passes. Foam pads on the same job were taking four.
Lake Country HDO Microfibre Pad: One Step 6 Inch
R 275.00
- Engineered specifically for long-throw orbital polishers
- Durable microfibre face outlasts standard foam on hard correction
- Available in CUT and OSP versions for full correction workflow
- Three sizes: 350F, 550F and 650F to match your backing plate
- Built for the demands of long-throw orbital polishers
- CUT and OSP versions cover the full correction workflow
- Durable microfibre face that holds up across long sessions
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,545.00
Long-Throw Engineered
Correction pads that keep up with serious machines
Most microfibre pads are built to a middle ground - the HDO line is not. Every spec decision, from the fibre pile density to the pad body construction, is aimed at long-throw orbital polishers where the arc is wider, the heat is higher and the pad needs to perform across a full correction session without losing its integrity.
Why HDO
Built different, because long-throw is different
Four reasons professionals choose the HDO Microfiber Pad for demanding correction work.
-
Long-Throw Optimised
Pad body and fibre construction handle the extra arc and heat of long-throw polishers without breaking down.
-
Session-Long Durability
Tougher than standard foam pads - holds cut rate and shape across extended multi-panel correction sessions.
-
CUT and OSP Versions
Aggressive CUT for heavy defect removal and a refined OSP variant to bring paintwork to a finish-ready state.
-
Three Size Options
350F, 550F and 650F sizes let you match the pad to your backing plate and the panel you're working on.
HDO vs Generic Microfibre Pads
Not all microfibre pads are the same spec
Generic microfibre pads can cut, and some are decent on short-throw machines. Where the HDO line earns its place is in specific design for long-throw use - the construction choices that matter when your machine is working harder and longer.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Designed for long-throw orbital polishers | Yes | No |
| Dedicated CUT and OSP microfibre variants | Yes | No |
| Holds pad integrity across long correction sessions | Yes | No |
| Multiple size options (350F, 550F, 650F) | Yes | Yes |
| Works on standard dual-action machines | Yes | Yes |
| Lower cost per pad | No | Yes |
Full Correction Workflow
CUT for the heavy work, OSP to refine and finish
Rather than hunting for different brand pads at each stage, the HDO range covers both ends of the correction process. Step in with the CUT microfibre to pull swirls and oxidation, then follow up with the OSP to bring the finish to coat-ready clarity - all on the same machine and backing plate.
Reviews
What our customers say
4.6
Based on 5 reviews
Aneesa P.
Verified
Good microfibre pad. Takes a bit more priming than I expected on the first use but once its loaded it cuts consistently. OSP version leaves a really clean finish.
Kabelo D.
Verified
Three correction jobs done on these pads. Still holding their shape, no fraying on the edges. Thats what I needed.
Shireen N.
Verified
Pair of 550F CUT pads arrived well packed. Used them on a client bakkie with serious oxidation - results were proper.
Lourens K.
Verified
Not cheap but the durability is there. Standard microfibre pads I was using before would lose their pile after a few washes. These dont.
Questions
Frequently asked
Which polishers are these pads designed for?
The HDO line is designed specifically for long-throw orbital polishers - machines with a throw of roughly 15mm (21mm in some classifications) such as the Rupes LHR21, Flex XFE and similar. The pad construction accounts for the extra lateral movement and heat these machines generate, which is where standard foam often loses integrity.
What is the difference between the CUT and OSP microfibre versions?
The CUT variant uses a more aggressive fibre pile for heavy defect removal - deep swirl marks, oxidation and scratches that need real mechanical work to lift. The OSP (One Step Polish) variant is set up for lighter correction and refining, delivering a finish closer to ready-to-coat or ready-to-wax without the need for a separate finishing stage.
What sizes are available and how do I match them to my backing plate?
The HDO Microfiber Pads come in three sizes: 350F, 550F and 650F. As a general guide, pair the pad to a backing plate roughly 10-15mm smaller than the pad diameter to ensure the pad face contacts the panel without the plate edge catching. Refer to the pad chart image on this listing for the full compatibility guide.
How do I prime an HDO microfibre pad before use?
Microfibre pads absorb more product than foam on the first pass. Dot a small amount of polish across the face and work it in with your finger or a pad conditioner brush before starting the machine. This prevents the pad from robbing product on the first section and gives you consistent cut from the start.
How do I clean these pads after use?
Remove excess product with a pad brush or compressed air between panels. After the session, rinse with warm water and a small amount of pad cleaner, working the fibre pile gently. Avoid twisting or wringing the pad. Leave face-up to air dry fully before storage. Machine washing is possible but keep spin speeds low and skip the tumble dryer.
Can I use these pads on a random orbital or dual-action machine with a shorter throw?
You can use them on shorter-throw dual-action machines, but these pads are engineered to perform at their best on long-throw polishers. On a short-throw DA you may find the cut rate lower than expected, because the pad is built to leverage the higher energy of a long-throw arc. For short-throw machines, Lake Country's standard microfibre pads are a better match.
How many correction passes does it typically take to remove heavy swirl marks?
On a long-throw machine with a quality compound, the HDO CUT pad generally clears heavy swirl marks and holograms in two to three slow overlapping passes. Harder, more abrasion-resistant clear coats may need an extra pass. Check your work under a panel light before moving to the OSP or finishing stage.
Are these pads safe on paint protection film (PPF) and vinyl wraps?
Exercise caution on PPF and vinyl. Microfibre CUT pads on a long-throw machine generate more heat than foam on a standard DA, and excessive heat can lift PPF edges or distort softer vinyl films. If you do work over PPF, use the OSP variant, keep machine speed conservative and work in shorter passes to manage heat build-up.