Lake Country HDO CCS: Finishing Pad 3 inch
R 210.00
- CCS pockets meter polish release precisely
- Dual-layer foam resists heat and fatigue
- Tapered edge prevents pad skipping on long-throw
- Patented HDO construction for durability
- CCS pockets meter polish - no dry or flooded surface
- Dual-layer foam stays cool and resists fatigue
- Tapered edge keeps the pad flat, no skipping
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,337.00
CCS Technology
Polish where you need it, when you need it
Conventional open-cell foam absorbs polish immediately, leaving most of the product trapped below the working surface. The HDO CCS Finishing Pad's partially closed cell pockets hold the polish and release it gradually as you work the panel, so you get consistent lubrication and product use from the first pass to the last.
Why HDO CCS
Four reasons this pad performs
Purpose-built for long-throw orbitals, not adapted from a standard pad
-
Controlled Polish Release
CCS pockets meter product to the surface gradually, preventing dry patches and polish waste.
-
Reduced Heat Build-Up
Dual-layer foam cuts internal friction so the pad stays cooler across long correction sessions.
-
No Pad Skipping
The tapered edge reduces surface tension so the pad sits flat and tracks smoothly on curved panels.
-
Long-Term Durability
Less foam fatigue per session means the pad holds its shape and performs consistently over many uses.
HDO CCS vs Standard Foam
What sets this pad apart
Standard open-cell finishing pads are functional, but they were not designed with long-throw machines in mind. Here is how the HDO CCS stacks up against a typical conventional foam finishing pad.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Controlled polish release (CCS pockets) | Yes | No |
| Dual-layer foam for reduced internal friction | Yes | No |
| Tapered edge to prevent pad skipping | Yes | No |
| Compatible with long-throw orbital polishers | Yes | Yes |
| Safe for use on clear coat and paint | Yes | Yes |
| Available in multiple sizes and grades | Yes | Yes |
Dual-Layer HDO Construction
Built to run cool on long-throw machines
Long-throw orbitals demand more from a pad than a standard dual-action machine does. The HDO dual-layer foam and tapered edge were designed to absorb that extra movement, reduce internal friction and keep the pad running flat and cool across an entire vehicle - not just the first few panels.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What polishers is the HDO CCS Finishing Pad designed for?
The HDO CCS line was created specifically for long-throw orbital polishers. The dual-layer construction and tapered edge are engineered to handle the wider orbit and greater pad flex that long-throw machines produce.
What does CCS Technology actually do?
CCS stands for the pattern of partially closed foam cells on the face of the pad. These pockets slow down how quickly the foam absorbs polish, then gradually release it to the panel as you work. The result is more consistent coverage without pooling or running dry mid-section.
Is this a cutting, polishing or finishing pad?
This is a finishing pad. It is designed for the last stage of machine polishing - refining the surface after any cutting or polishing steps, or for applying a finishing polish or glaze to already-corrected paint. It will not remove heavy defects on its own.
What polishes work best with this pad?
Pair it with a light finishing polish or a one-step product used at a finishing speed. Because CCS controls product absorption, you will find you need less polish per section than with a conventional open-cell foam - start with a small amount and add more only if the panel runs dry.
How do I prevent the pad from skipping on the panel?
The tapered edge profile is specifically designed to reduce surface tension and let the pad sit flat. Prime the pad with a few drops of polish before your first pass, keep machine speed in the recommended range for finishing, and the CCS pockets will handle the rest by reducing the suction effect that causes skipping.
Can I use this pad on paint protection film or vinyl wrap?
A light finishing polish with this pad at low speed is generally safe on PPF and quality vinyl, but always check the film or wrap manufacturer's recommendations first. Avoid high heat from extended passes in one spot, though the dual-layer design does help keep temperatures down.
How do I clean the pad after use?
Rinse the pad under warm water immediately after use to flush out residual polish before it cures in the foam. A pad-cleaning brush or pad washer attachment works well. Allow the pad to air-dry completely before storing - compressing or stacking wet pads distorts the foam cells over time.
How does the dual-layer design improve durability?
The dual layer reduces the lateral, or horizontal, movement inside the pad as the machine oscillates. Less internal movement means less friction, which means less heat build-up and reduced foam fatigue over multiple uses. The pad holds its shape longer and performs consistently across more detailing sessions compared to single-layer foam pads.