Lake Country CCS Cutback White Polishing Pad 3 inch
R 155.00
- Patented CCS pockets release polish gradually
- Thin, tapered design fits 3-inch backing plates exactly
- Reduces heat and pad skipping on DA/RO machines
- Worldwide patented CCS Technology for consistent results
- CCS pockets meter polish release pass by pass
- Less heat and no pad skipping on the panel
- Exact fit for 3-inch DA and RO backing plates
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 9,725.00
CCS Technology
Polish that works for you, not against you
Conventional pads drink polish and leave most of it trapped below the working surface. Lake Country's patented CCS pockets hold product in reserve and release it steadily as you work, so every pass delivers consistent correction rather than tailing off after the first few seconds.
Why CCS Cutback
Four reasons detailers reach for it
Engineered to make every drop of polish count.
-
Metered Polish Release
CCS pockets store polish and release it gradually, keeping the working surface loaded for the full pass.
-
Runs Cooler
Reduced foam-to-paint contact means less friction heat, so delicate clearcoats stay safe.
-
No Pad Skipping
The pockets reduce surface tension, letting the pad sit flat and track smoothly across the panel.
-
Exact Fit Design
Thin and tapered profile fits a 3-inch backing plate precisely for consistent, vibration-free correction.
CCS vs Standard Foam
What you get that a plain foam pad doesn't offer
Standard smooth foam pads get the job done, but they absorb product quickly and build heat. Here's how the CCS Cutback stacks up on the factors that matter during a correction session.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Worldwide patented cell technology | Yes | No |
| Gradual, metered polish release | Yes | No |
| Reduced friction heat during use | Yes | No |
| Prevents pad skipping on panel | Yes | No |
| Compatible with DA and RO machines | Yes | Yes |
| Available in multiple sizes | Yes | Yes |
Designed for DA and RO
Built for the way small pads need to perform
At 3 inches, this pad is precise enough for bonnets, doors, and tight curves, and the thin, tapered profile sits flat on the backing plate to eliminate skipping and vibration on your machine.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machines is this pad compatible with?
The CCS Cutback White Polishing Pad is designed exclusively for DA (dual-action) and random orbital machines. It is not intended for rotary use.
What backing plate size does this pad require?
This pad is the 3-inch version and is designed to fit a 3-inch backing plate. The tapered design gives an exact fit for optimised performance.
How do I prime the CCS pockets before use?
Apply a few drops of polish directly into the CCS pockets and work it in by hand before your first pass. This primes the cells so they begin releasing product evenly from the first section you work.
What type of polish or compound works best with this pad?
The white foam grade is suited to light polishing and finishing work. Pair it with a light cutting or finishing polish for a refined, gloss-ready result. For heavier correction, Lake Country's coarser CCS pads would be a better match.
Does the CCS Technology really reduce heat?
Yes. Because the CCS pockets reduce the amount of foam surface in direct contact with the paint, there is less friction generated per pass. This is particularly useful on sensitive or thin clearcoats where heat build-up is a concern.
How do I clean this pad after use?
Rinse the pad under warm running water and work out the polish with your fingers or a pad-cleaning brush. Allow it to air-dry fully before storing or reusing. Avoid wringing the foam as this can tear the cell structure over time.
Can I use this pad with a ceramic coating or sealant?
This pad is designed for polishing and correction stages. For coating or sealant application, use a dedicated applicator pad. Running a coating on a foam cutting or polishing pad wastes product and can leave an uneven layer.
How does the CCS pad differ from a standard smooth foam pad?
A conventional smooth foam pad absorbs most of the polish into its surface, reducing what is actually working on the paint. The CCS pockets hold the polish in reserve and release it gradually, so you get more consistent correction across the whole section without needing to reload as frequently.