Guaranteed safe checkout
Total price R 1,620.00
True 360 Spray
The Venus Super 360 Pro+ eliminates the frustrating workaround of tilting or flipping a standard sprayer to get into tight areas. Its 360-degree nozzle delivers a consistent spray whether you are holding it upright, sideways or fully inverted - no dead spots, no interruptions mid-application.
Why the 360 Pro+
Four reasons this stays on the trolley.
Sprays consistently at any angle, fully inverted included - no awkward repositioning.
Enough chemical on board to complete a full vehicle detail without a refill stop.
Switch between fine mist and direct stream to match the product and panel you are working.
Built to withstand daily professional use and repeated exposure to detailing chemicals.
How It Compares
Not all pressure sprayers are equal. Here is how the Venus Super 360 Pro+ stacks up against a typical budget sprayer you might find at a hardware store.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Sprays fully inverted | Yes | No |
| Consistent spray at any angle | Yes | No |
| Adjustable mist-to-stream nozzle | Yes | Yes |
| 2-litre capacity | Yes | Yes |
| Built for professional chemical compatibility | Yes | No |
| Compact enough for a detailing bag | Yes | Yes |
Built for Daily Use
The 2-litre capacity and robust build make the Kwazar Venus Super 360 Pro+ a sprayer you can rely on through back-to-back details. It is the kind of tool that serious detailers reach for without thinking - because it simply works every time.
Reviews
The 360 nozzle is not a gimmick. Spraying into wheel arches properly, without tilting and losing pressure halfway through, makes a real difference. This one stays filled with my iron fallout remover.
Bought three of these and labelled them for different chemicals. Saves so much time not rinsing between products. Build quality is noticeably better than the generic sprayers I was using before.
Solid sprayer. The upside-down function works exactly as advertised - I use it for sill application and it is consistent throughout. Took a couple of pumps to get used to the pressure required, but nothing unusual.
My previous sprayer would sputter the moment I angled it past 45 degrees. This one just sprays. Clean pattern, good pressure, and the 2L holds enough for a full session without topping up.
Good sprayer for the price point. Packaging was neat when it arrived. The mist setting is fine enough for spray sealant application without wasting product - that matters on a busy day.
Three of these on my trolley now. Reliable, no leaks, and the 360 angle is genuinely useful when you are doing full decon on a low-riding sedan. Would not go back to a standard sprayer.
Questions
Yes. The 360-degree Pro+ nozzle is designed specifically to spray at any angle, including fully inverted. This makes it far more useful than a standard pressure sprayer when you are working on wheel arches, undersides of sills or any area where holding the bottle upright is not practical.
It is compatible with most water-based detailing chemicals - quick detailers, spray waxes, spray sealants, diluted all-purpose cleaners and decon sprays. Always check the chemical manufacturer's guidance if you are using solvents or highly acidic or alkaline products, as aggressive chemicals can degrade seals over time.
Fill the bottle to the desired level, reattach the pump head securely, and pump the handle until you feel resistance. That indicates sufficient pressure for spraying. You can top up pressure mid-use if the spray weakens.
Yes. The nozzle can be adjusted between a fine mist and a more direct, focused stream. A fine mist works well for lubricating clay or applying spray sealants, while a direct stream is useful for targeting specific areas like door jambs or wheel spokes.
Rinse it out with clean water after each use, especially if you have used acidic, alkaline or pigmented products. For thorough cleaning, fill with water, pump and spray until the water runs clear. This extends the life of the seals and prevents cross-contamination between chemicals.
It is a good size for most jobs - large enough to handle a full vehicle without constant refilling, but compact enough to carry in a detailing bag or kit. If you are running multiple products at once, it is common to keep several Kwazar sprayers labelled for different chemicals.
The Pro+ designation refers to the upgraded 360-degree nozzle assembly, which is the key functional difference. Standard pressure sprayers require the bottle to be held relatively upright to spray consistently. The Pro+ nozzle draws from the tube at any orientation, so the spray is consistent regardless of the angle you hold it at.
Exercise caution with highly acidic or alkaline products. While the sprayer is designed for professional use, prolonged exposure to aggressive chemistry can degrade internal seals. If you regularly spray strong fallout removers or acid wheel cleaners, rinse the sprayer thoroughly after every use and inspect seals periodically.
