Holder for Brushes and Bottles- Exterior Label
R 450.00
- Holds over 10 kg without lifting from the wall
- 1.5 mm powder-coated mild steel construction
- 7 upper holes in two sizes for most brush handles
- Lower channels fit standard atomisers and sprayers
- Powder-coated steel holds 10+ kg securely
- 7 holes in two sizes fit most brush handles
- Wall-mount keeps tools accessible in seconds
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,760.00
Built for the Bay
Heavy-duty steel that earns its place on your wall
Cut from 1.5 mm mild steel and finished in a powder coat, this holder is built to carry real load - over 10 kg - without flexing or pulling away from the wall. It is the kind of thing you mount once and forget about, because it just works every single day.
Why This Holder
Solid. Simple. It Stays Put.
Four reasons this earns a permanent spot in your detailing setup.
-
Steel Core Strength
1.5 mm mild steel construction holds over 10 kg without lifting from the wall.
-
Two Hole Sizes
Seven holes in two diameters accommodate most standard detailing brush handles.
-
Grab-and-Go Layout
Wall-mount design puts brushes and sprayers at arm's reach with zero bench clutter.
-
Powder-Coat Finish
Durable powder coat resists moisture and chemical splash in an active detailing bay.
How It Compares
Steel Wall Mount vs. Typical Plastic Organisers
Not every organiser is built for the demands of an active bay. Here is how this holder stacks up against the cheaper plastic alternatives most detailers start with.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Load rating over 10 kg | Yes | No |
| 1.5 mm steel construction | Yes | No |
| Powder-coated corrosion resistance | Yes | No |
| Fits most standard brush handle sizes | Yes | Yes |
| Holds trigger sprayers and atomisers | Yes | Yes |
| Compact footprint (40 x 8.5 x 19 cm) | Yes | No |
Organised Kit, Faster Work
Every brush and sprayer exactly where you left it
Seven holes in two diameters handle most brush handle sizes, while the lower channels keep atomisers and trigger bottles upright and ready to grab. Mount your exterior kit here and stop losing time looking for the right brush between correction steps.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What sizes of brushes does this holder fit?
The holder has 7 upper holes in two different diameters, which cover the vast majority of detailing brush handle sizes on the market - from slim detailing brushes to thicker wheel and engine bay brushes. If your brush handle is within standard sizing, it will drop in without any modification.
What types of spray bottles and atomisers fit in the lower channels?
The lower channels are designed to accept most standard trigger sprayers and atomisers. Typical 500 ml and 1-litre trigger bottles used in detailing sit comfortably in the slots. If you are using an unusual or oversized bottle, check the channel width against your bottle neck before mounting.
How much weight can the holder support?
The solid 1.5 mm mild steel structure is rated to hold over 10 kg of load without lifting from the wall. That is more than enough for a full set of detailing brushes and several loaded spray bottles at the same time.
What hardware do I need to mount this to the wall?
The holder is designed for wall mounting, but mounting hardware (screws, wall plugs or brackets) is not included in the listing. Use fixings appropriate for your wall type - masonry anchors for brick or concrete, and suitable wood screws for timber-framed or board walls. Given the potential 10 kg load, use at least two secure fixing points.
Is the powder coating durable enough for a wet or humid detailing environment?
Powder coating offers good resistance to moisture and minor chemical splash compared to bare or painted steel. In a working bay where sprays and water are common, the coating will hold up well. If the holder is exposed to direct water spray regularly, a quick wipe-down after sessions will extend the finish.
Can I use this holder for interior detailing tools as well?
Absolutely - the holder is labelled 'Exterior' to help you separate your exterior and interior kits, but the physical design works equally well for interior brushes and detailing sprays. Many detailers buy two units and label them separately to avoid cross-contamination between exterior and interior products.
What are the exact dimensions of the holder?
The holder measures 40 cm in length, 8.5 cm in width and 19 cm in height. These dimensions make it compact enough to fit in most workshop bays, mobile van setups or garage walls without taking up excessive space.
Is this holder compatible with compressed-air spray guns or just trigger sprayers?
The lower channels are sized for standard hand-pump atomisers and trigger sprayers. Compressed-air spray guns with larger or irregularly shaped bodies may not sit correctly in the channels. The holder is primarily designed for the handheld sprayer bottles that are standard in most detailing workflows.