Lake Country HDO CCS: Finishing Pad 5 inch
R 390.00
- CCS pockets release polish gradually as needed
- Dual-layer foam reduces heat and pad fatigue
- Prevents pad skip on long-throw orbitals
- Tapered edge for clean, consistent passes
- CCS pockets meter polish to the surface, not into the foam
- Dual-layer build kills heat and extends pad life
- Refined, gloss-ready finish on paint in one stage
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,517.00
CCS Technology
Polish stays at the surface, not inside the pad
Conventional foam pads absorb polish faster than you can work it, wasting product and reducing pad performance. The HDO CCS Finishing Pad's patented cell pockets hold polish in reserve and release it gradually as you work, so every pass delivers consistent, controlled product to the paint.
Why HDO CCS
Four reasons detailers choose this pad
Engineered for long-throw performance and a flawless finishing result.
-
Controlled Polish Release
CCS pockets reservoir polish and meter it to the surface gradually, reducing waste and keeping product where it works.
-
No Pad Skip
Reduced surface tension from the CCS pockets lets the pad run flat on the paint without hopping or skipping.
-
Heat and Fatigue Resistant
Dual-layer foam cuts internal friction and heat build-up, keeping the pad performing through long correction sessions.
-
Gloss-Ready Finish
Leaves paint refined, clear and slick - ready for a sealant, wax or ceramic coating without further refinement.
HDO CCS vs Standard Foam
How it stacks up against a conventional finishing pad
Not all finishing pads are built the same. Here is how the HDO CCS compares to a typical single-layer foam finishing pad in the areas that matter on a long-throw machine.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Controlled polish release via cell pockets | Yes | No |
| Dual-layer foam for reduced heat build-up | Yes | No |
| Prevents pad skip on long-throw machines | Yes | No |
| Suitable for finishing polishes | Yes | Yes |
| Fits standard 5 inch backing plate | Yes | Yes |
| Recommended for heavy compound work | No | No |
Built for Long-Throw
Durability designed around how you actually polish
Long-throw orbitals generate more pad stress than standard DA machines, and most foam pads wear out too quickly under that load. The dual-layer HDO construction limits internal movement, cuts heat build-up and eliminates foam fatigue - so this pad performs consistently from the first panel to the last.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What polishers is the HDO CCS Finishing Pad designed for?
This pad is designed specifically for long-throw orbital polishers. The dual-layer construction and CCS pockets handle the higher oscillation forces of long-throw machines far better than conventional single-layer foam pads, which tend to overheat and break down faster under those loads.
What does CCS Technology actually do?
CCS stands for the pattern of partially closed foam cells (pockets) on the pad face. Conventional foam absorbs polish quickly and traps most of it below the working surface. The CCS pockets act as reservoirs that gradually release polish as you work, keeping product at the paint surface where it belongs and reducing waste.
What polish should I use with a finishing pad?
A finishing pad pairs best with a finishing or refining polish - something with mild diminishing abrasives that removes light hazing and refines the surface to a clear, high-gloss result. It is not the right pad for heavy cutting compounds; use a cutting or medium pad for correction work and finish with this one.
Will this pad work on a standard 5 inch backing plate?
Yes, the 5 inch pad is sized to fit a standard 5 inch backing plate. Make sure your backing plate and pad sizes are matched for stable, even pad contact across the working surface.
How does the dual-layer design improve durability?
The dual-layer construction limits lateral or horizontal movement inside the pad during use. Less internal movement means less friction, which means less heat. Reduced heat is the main reason this pad holds its shape and performance longer than a conventional single-layer foam pad - especially relevant when running a long-throw machine for extended periods.
How do I prime the CCS pad before use?
Apply a small amount of polish directly into a few of the CCS pockets before your first pass. This pre-charges the pockets and gives you even product distribution from the start. You generally need less product than with a conventional pad because the pockets hold and release polish efficiently throughout the cycle.
What surfaces can I use this pad on?
The HDO CCS Finishing Pad is used on painted surfaces - clear coat, single-stage paint, and paint under PPF in situations where the film allows machine polishing. It is a polishing pad intended for paint finishing, not for glass, trim or wheels. Always check your polish's surface compatibility separately.
How do I clean and care for this pad?
Rinse the pad during your session with a pad cleaning brush or pad washer to keep the CCS pockets clear of spent polish. After the job, wash the pad thoroughly, squeeze out excess water and allow it to air dry completely before storing flat or in a case. Avoid storing pads compressed under heavy objects, which distorts the foam over time.