Cruise Culture
Verified
Very good product, covers more surface area
Clay Mitt
R 110.00
- Reusable alternative to traditional clay bars
- Medium-grade polymer safe on paint, glass and chrome
- Large surface area cuts decon time significantly
- Comfortable mitt backing for secure grip and control
- Medium-grade polymer safe on paint, glass and chrome
- Large mitt face cuts full decon time dramatically
- Reusable design outlasts traditional clay bars
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 876.00
Decon Done Right
Bonded contaminants, gone in less time
The ClayMate Clay Mitt covers far more surface area per pass than a traditional clay bar, so a full exterior decon takes a fraction of the time. The medium-grade polymer coating lifts tar, overspray, brake dust and industrial fallout cleanly without scratching, leaving every panel smooth and ready for polishing or protection.
Why the ClayMate
Everything a decon stage needs
Faster, safer and more practical than a clay bar.
-
Faster Full Decon
The large mitt face covers panels quickly, cutting total decon time compared to working with a small clay bar.
-
Surface-Safe Polymer
Medium-grade polymer coating removes bonded fallout without marring paint, glass or chrome when used with lubricant.
-
Reusable Design
Rinse, dry and store after each use - the ClayMate outlasts conventional clay bars across multiple decon sessions.
-
Comfortable Control
The mitt backing keeps the tool secure in your hand so you can maintain consistent pressure across every panel.
ClayMate vs Clay Bar
How it stacks up against a traditional clay bar
Clay bars have been the decon standard for years - and they work. Here is an honest look at where the ClayMate differs and where both tools do the job equally well.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Removes bonded surface contaminants | Yes | Yes |
| Safe on paint and glass with lubricant | Yes | Yes |
| Reusable across multiple sessions | Yes | No |
| Large surface area per pass | Yes | No |
| Secure grip during use | Yes | No |
| Available in ultra-fine grades | No | Yes |
Built to Last
Reusable design that earns its keep
Unlike a clay bar that degrades, shrinks and eventually gets discarded, the ClayMate is designed to be rinsed, stored and used again. For detailers working multiple cars or enthusiasts who decon regularly, the reusable design means the mitt pays for itself over repeated sessions.
Reviews
What our customers say
5.0
Based on 1 reviews
Questions
Frequently asked
What lubricant should I use with the ClayMate Clay Mitt?
Use a dedicated clay lubricant or a quality quick detailer. You want enough slip so the mitt glides without dragging. Never clay a dry surface - even a light mist is not enough on heavily contaminated paint. Keep the panel well lubricated throughout and top up as needed.
Which surfaces can the ClayMate Clay Mitt be used on?
It is designed for paint, glass, plastic and chrome. Those four cover most exterior decon situations. Avoid using it on rough or heavily textured plastics where the polymer coating could catch and tear, and keep it off soft rubberised trim.
How do I know when the panel is properly decontaminated?
Run a clean fingertip in a plastic bag over the surface after claying. If it glides without any roughness or grittiness, the panel is clean. You can also listen for the squeak - properly decontaminated paint squeaks when you press a clean, dry fingertip across it.
How do I clean the mitt after use?
Rinse it thoroughly with clean water after each session to flush out the lifted contaminants. Fold and knead the polymer surface gently under running water until the water runs clear. Allow it to air-dry fully before storing. Do not leave it face-down on a hard surface while wet.
Can I drop the mitt and carry on using it?
No. If the ClayMate hits the floor, retire it for that session. Grit embedded in the polymer coating from a drop will scratch your paint just like a contaminated clay bar would. Rinse it thoroughly before considering further use, and inspect the surface carefully before proceeding.
Does the ClayMate Clay Mitt replace an iron fallout remover?
The two products work differently. A chemical fallout remover dissolves embedded iron particles before you clay, which makes the claying stage faster and reduces the risk of marring. For best results on heavily contaminated vehicles, do a chemical decon pass first, then follow up with the ClayMate to remove the remaining bonded contaminants.
Is the ClayMate Clay Mitt safe to use before applying a ceramic coating or paint protection film?
Yes - decontamination is a required step before any coating or PPF application. The ClayMate removes the bonded particles that would otherwise sit under your protection layer and cause adhesion issues or visible texture. Follow up with a panel wipe or IPA solution after claying to remove any lubricant residue before coating.
How does the ClayMate compare to a traditional clay bar in terms of cut strength?
The ClayMate uses a medium-grade polymer coating, which puts it in a similar range to a medium-grade clay bar. It is not a heavy-duty aggressive clay, so it is appropriate for most daily-driven vehicles with typical levels of contamination. Very heavily contaminated surfaces - think long-neglected fleet vehicles with severe industrial fallout - may need a more aggressive decon approach first.