Ceramic Coating Microfibre Applicator Pad
R 50.00
- Hydrophobic barrier prevents product soaking into sponge
- Keeps coating on the surface, not wasted in the pad
- Reduces tacky residue as the coating cures
- 12.5 x 8 x 4 cm comfortable hand-sized format
- Hydrophobic barrier keeps coating off the sponge core
- Less product waste per panel, every time
- Reduces tacky residue as the ceramic cures
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 345.00
Smarter Application
Stop losing coating to the sponge
Standard microfibre applicators let low-viscosity ceramic coatings wick straight through into the sponge core, wasting product and making consistent coverage harder to achieve. The hydrophobic barrier layer in this pad stops that from happening, keeping the coating at the surface where it actually bonds.
Why It Works
Built specifically for ceramic coatings
Every design decision targets the one job this pad has to do.
-
Hydrophobic Barrier Layer
Stops ceramic coating from soaking into the sponge core, so product goes onto the paint, not into the pad.
-
Reduced Product Waste
More coating reaches the surface per drop, lowering the amount of product consumed per panel.
-
Controlled Flash
Consistent product delivery during application means the coating flashes more evenly and cures without tacky patches.
-
Comfortable Hand Size
At 12.5 x 8 x 4 cm, the pad fills the hand naturally for controlled pressure across flat panels and curved surfaces.
How It Stacks Up
Barrier-layer pad vs. standard microfibre applicator
A standard microfibre applicator gets the job done, but the absorbent sponge core works against you when the product is a low-viscosity ceramic. Here is where the difference shows.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Prevents coating soaking into sponge core | Yes | No |
| Reduces tacky residue during flash | Yes | No |
| Applies ceramic coating to paint | Yes | Yes |
| Soft microfibre application face | Yes | Yes |
| Low product waste per panel | Yes | No |
| Reusable across multiple applications | No | No |
Cleaner Cure, Better Finish
Fewer high-spots, less buffing
By controlling how much product reaches the panel at once, the barrier layer reduces the excess buildup that turns tacky as ceramic coatings flash. The result is a more uniform cure, a flatter gloss, and far less time spent chasing sticky residue with a buff cloth.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
How do I apply ceramic coating with this pad?
Place a few drops of ceramic coating directly onto the microfibre face of the pad. Work one panel at a time using overlapping straight-line passes. The hydrophobic barrier holds the product at the surface rather than letting it wick into the sponge, so you get a thin, even layer with minimal waste.
What surfaces is this pad compatible with?
The pad is suited to clear coat paintwork, glass, polished metal, and PPF. Avoid using it on unprepared or heavily contaminated surfaces - run your decon and correction stages first, then apply the coating with a clean pad for best results.
Can I use this pad on wheels and trim?
Yes, the pad works on alloy wheels and hard trim panels. For very textured or porous trim, a foam or suede applicator may give more even coverage, but for smooth surfaces this microfibre pad performs well.
How does the hydrophobic barrier reduce tacky residue?
Standard applicator sponges absorb a portion of the coating, which can slowly seep back out during flash time and cause uneven, gummy high-spots. The barrier layer in this pad stops that bleed-back, so the product stays controlled on the surface and flashes more evenly.
Does this pad work with all ceramic coating brands?
It is designed for liquid ceramic coatings in general. Provided you follow the flash time and cure instructions for your specific coating product, this pad is compatible with the low-viscosity formulas typical of professional-grade ceramics.
How many pads do I need for a full car?
For a standard sedan, most detailers use one fresh pad per car to avoid cross-contamination between panels. For larger vehicles or multi-layer applications, have two or three pads on hand. Once a pad has cured coating locked into the microfibre, it should be replaced rather than reused.
Can this pad be used with a ceramic coating topped over a wax or sealant base?
This pad is an application tool, not a layering limiter - whether you are going coating-on-coating or applying a ceramic over a prepared base, the pad performs the same way. Always follow your coating manufacturer's guidance on what it bonds to.
What finish should I expect after using this pad?
Once the coating has cured, you should see a flat, high-gloss finish with no gummy patches or uneven high-spots. Because the barrier layer controls product delivery during application, you avoid the thick, streaky areas that can result from a standard sponge absorbing and releasing product inconsistently.