Work Stuff One-Step Pad: 5 Inch
R 199.00
- Cuts and finishes in a single pass
- Medium-hard closed-cell foam for consistent results
- Side slant reaches tight panels and edges
- Central hole dissipates heat and aids alignment
- Cuts swirls and refines to gloss in one pass
- Side slant reaches tight panels without effort
- Closed-cell foam holds performance pad to pad
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 18,463.00
One Pad, Done
Cut the swirls. Keep the gloss. Move on.
The Basic One-Step Pad's medium-hard closed-cell foam delivers enough aggression to work through swirl marks and light scratches, then refines the finish in the same pass - no pad swap required, no extra machine time.
Why Detailers Choose It
Engineered for Efficiency
Less pad-swapping, more time correcting.
-
Cut and Finish Together
Medium-hard foam handles correction and gloss refinement in a single buffing stage.
-
Consistent Foam Cell Structure
Closed-cell foam maintains even abrasive distribution from the first section to the last.
-
Heat-Managed Design
Central hole channels air through the pad face, keeping compound and paint cool during use.
-
Secure Velcro Grip
High-grammage Velcro backing holds firm on DA and rotary machines without slipping.
How It Stacks Up
One-Step Pad vs. Standard Single-Purpose Foam Pad
Most detailers run separate cutting and finishing pads, which means more time, more pad changes and more product. Here is how the Basic One-Step Pad compares to a typical single-stage cutting-only foam pad.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Cuts and finishes in one pass | Yes | No |
| Central hole for heat dissipation | Yes | No |
| Side-slant for tight panel access | Yes | No |
| Works on standard clearcoat paint | Yes | Yes |
| Velcro backing for backing-plate compatibility | Yes | Yes |
| Deep-cut on heavily damaged clearcoat | No | No |
Built for Real Work
Designed to reach where other pads struggle
The side-slant profile makes it straightforward to get into bumper edges, door handles and curved bodywork without wrestling the machine. The central hole keeps temperatures in check so you can work a full panel without the compound drying out mid-section.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine types is this pad compatible with?
The high-grammage Velcro backing fits any standard 5-inch backing plate, so it works on dual-action, random-orbital and rotary machines. Match your machine speed to the product you are using - most one-step compounds perform well between 1200 and 2000 OPM on a DA.
What level of paint defects can this pad correct?
The medium-hard foam gives you enough cut for moderate swirl marks, light scratches and water-spot etching. For heavy buffer trails or deep single-panel scratches you would want a dedicated cutting pad first. This pad is designed to handle correction and gloss in one go on paint in fair to good condition.
Which compounds or polishes work best with this pad?
It is designed for one-step products - polishes that carry both an abrasive and finishing oils in a single formula. Light cutting compounds paired with a slow machine speed also work well. Avoid heavy-cut compounds intended for wool or firm foam, as the medium-hard structure is not designed to manage that heat and abrasive load for extended periods.
Is the closed-cell foam safe on soft or freshly painted panels?
Closed-cell foam is firmer than open-cell finishing foam, so test your pressure on a hidden area of softer paint systems before committing to full panels. On standard factory clearcoats it is safe at normal working pressure. Always start with a smaller section to confirm pad, product and paint are working together before doing the whole car.
What finish can I expect after using this pad?
When paired with a quality one-step compound, the medium-hard foam cuts the defects and the closed-cell surface refines as the abrasive diminishes, leaving a clean, glossy finish ready for a sealant or ceramic coating. It will not match a dedicated finishing pad on very dark paint, but for most colours the result is close.
How do I clean and maintain the pad?
Spur or brush the pad out between sections to prevent compound build-up glazing over the foam. After the session, wash with a pad washing brush and warm water, rinse thoroughly and stand it on its edge to dry. Do not wring closed-cell foam - compression drying can cause the cell structure to deform over time.
What does the central hole actually do?
The central hole allows air to circulate through the backing plate and pad face during use, which helps dissipate heat generated by friction. Less heat means less chance of product drying out too quickly and less risk of heat damage on sensitive paint. It also makes lining the pad up on the backing plate's central pin quicker and more accurate.
Can I layer a sealant or ceramic coating directly after using this pad?
Yes. Once you have wiped down the panel with an IPA prep spray to remove any compound oils and carrier residues, the surface is ready for a sealant, wax or ceramic coating. The one-step finish should leave the paint clean and refined enough that no additional polishing step is needed before coating.