Work Stuff Cutting Pad: 3 Inch
R 180.00
- Closed-cell foam holds cut throughout the entire polish
- Side slant design reaches tight panels and edges
- Central hole dissipates heat and aids machine alignment
- Velcro backing grips firmly on 3-inch backing plates
- Closed-cell foam cuts consistently from start to finish
- Side slant reaches tight spots other pads can't
- Central hole keeps heat down during extended correction
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,988.00
Consistent Cut
Correction that holds from the first pass to the last
The closed-cell foam in the Basic Cutting Pad maintains its cutting properties throughout a full correction session - no falling off in performance halfway through a panel. Whether you are removing oxidation, scratching, or RDS, you get repeatable results every time.
Why This Pad
Four reasons detailers reach for it
Engineered for correction work that demands consistency and control.
-
Sustained Cutting Power
Closed-cell foam keeps cutting properties consistent throughout extended buffing sessions.
-
Precision in Tight Areas
The 3-inch size and side slant profile reach panel edges, pillars and complex curves easily.
-
Heat Management Built In
The central hole allows heat to escape during prolonged correction, protecting both pad and paint.
-
Secure Machine Grip
Velcro backing holds firm on the backing plate throughout heavy-cut polishing without slipping.
How It Compares
Basic Cutting Pad vs. a generic foam cutting pad
Not all cutting pads are made the same. Here is how the Work Stuff Basic Cutting Pad stacks up against a typical budget foam pad you might find at a general auto parts store.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Consistent cut throughout full session | Yes | No |
| Central hole for heat dissipation and alignment | Yes | No |
| Side slant for hard-to-reach areas | Yes | No |
| Velcro backing for machine compatibility | Yes | Yes |
| Suitable for both DA and rotary polishers | Yes | Yes |
| Removes paint defects and oxidation | Yes | Yes |
Built for Tight Spots
Reach the areas a bigger pad simply can't
At 3 inches with a side slant profile and central alignment hole, this pad is purpose-built for precision - working into door edges, pillar sections, and complex body lines where a 5- or 6-inch pad has no business going.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What backing plate size does this pad fit?
The Basic Cutting Pad is 3 inches in diameter and is designed to pair with a 3-inch Velcro backing plate on a DA or rotary polisher. Make sure your backing plate is the same size or slightly smaller for proper pad overhang.
What compounds work well with this pad?
This pad is built for cutting compounds - the kind formulated to remove heavy swirl marks, oxidation, scratches, and RIDS. A medium-cut to heavy-cut compound is the right pairing. Once correction is done, step down to a finishing pad with a light polish to refine the surface before applying a sealant or coating.
Can I use this pad on a rotary polisher?
Yes. The closed-cell foam construction and secure Velcro backing make it suitable for both DA and rotary use. On a rotary, manage your speed and pressure carefully - rotaries generate more heat, and the central hole helps, but technique still matters.
Is this pad safe on all paint types, including soft or dark paint?
This is a cutting pad, so it will produce haze on soft or dark paint that needs to be refined away with a follow-up finishing step. It is not a finishing or glazing pad. Always test on a less visible area first if you are unsure of the paint's hardness or condition.
How do I clean and maintain the pad?
Rinse the pad under warm water during and after use to clear compound residue. Use a pad cleaning brush or pad washer while the machine is running to keep the foam open and cutting efficiently. Allow the pad to air dry completely before storing - never store it compressed.
How long does this pad last before it needs replacing?
Longevity depends on frequency of use, the abrasiveness of the compound, and how well you maintain the pad between sessions. Closed-cell foam holds up well under regular use. Replace the pad when the foam starts to tear, deform, or the Velcro backing loses its grip.
What does the central hole actually do during polishing?
The central hole serves two purposes: it helps you centre the pad correctly on the backing plate's locating pin, and it allows heat generated during prolonged polishing to escape rather than build up in the foam. This keeps the pad cooler and helps maintain consistent performance over longer correction sessions.
Can I use this pad for spot correction rather than full-panel work?
The 3-inch size is specifically suited to spot correction. The side slant design makes it easier to work into tight spots like door jambs, around mirrors, along panel edges, and on bonnets with complex curves. It is a compact, precision tool as much as it is a cutting pad.