Flex Swirl Finder Pocket Light
R 1,600.00
- 140-lumen LED reveals swirls and holograms
- Adjustable beam angle from 10° to 70°
- Push-button tail-cap for one-handed use
- Compact penlight fits in any apron pocket
- 140 lm LED tuned to expose swirls and holograms
- 10° to 70° adjustable beam for spot or flood inspection
- 56 g penlight - pocket-ready, one-handed operation
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,905.00
Precision Inspection
See every swirl before it's too late
The Flex Swirl Finder Pocket Light uses a purpose-tuned LED to reveal holograms, swirl marks and fine scratches that standard lighting masks. At 140 lumens with a focus-adjustable beam, it gives you the diagnostic clarity to know exactly where correction is needed - and when your work is truly done.
Why Detailers Choose It
The Right Light Changes Everything
Four reasons this penlight belongs in every detailer's kit.
-
Defect-Tuned LED
Colour temperature chosen specifically to maximise swirl, hologram and scratch visibility on paint.
-
Adjustable Focus
Beam shifts from a 10° precision spot to a 70° wide flood - spot defects or sweep panels fast.
-
56 g, Pocket-Ready
Compact penlight form factor fits any apron or tool roll without adding weight to your kit.
-
Single-Handed Control
Push-button tail-cap switch lets you hold and operate the light while your other hand stays free.
How does it stack up?
Flex Swirl Finder Pocket Light vs a typical cheap penlight
Any light can light up a panel. What separates a dedicated swirl finder from a general-purpose torch is whether it actually makes defects visible enough to act on. Here is an honest look at where the difference lies and where both tools common ground.
| Feature | DetailerSA | Alternative |
|---|---|---|
| LED colour temperature tuned specifically for paint defect visibility | Yes | No |
| Adjustable beam angle (10° spot to 70° flood) for different inspection tasks | Yes | No |
| Compact and lightweight enough to carry during a full detail | Yes | Yes |
| Batteries included, ready to use out of the box | Yes | Yes |
| Approximately 2 hours continuous runtime on a single set of batteries | Yes | No |
| USB rechargeable - no need to buy replacement batteries | No | No |
Built for the Detailer
Light enough to carry, precise enough to trust
At just 56 grams and 190 mm long, the Flex Swirl Finder sits in an apron pocket or tool bag without bulk. The push-button tail-cap means one-handed operation whether you're mid-correction or doing a final walk-around, and the included batteries mean it's ready to go straight out of the box.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What kinds of defects does this light actually reveal?
The LED's colour temperature is specifically chosen to maximise contrast on paint surfaces. It makes swirl marks, buffer holograms, fine scratches, marring and surface contamination far more visible than standard overhead shop lighting or a phone torch. It won't replace a dedicated raking light stand for full-panel inspection, but for targeted checks it's exceptionally effective.
How do I get the best results when using it?
Use it in a shaded or dimly lit environment - direct sunlight washes out the contrast the light creates. Hold the light low and rake it across the panel at a shallow angle of around 10-20°. This side-lighting technique makes even the finest swirls and holograms stand out clearly against the paint surface.
Can I use it with one hand while I work?
Yes. The push-button tail-cap switch is designed specifically for single-handed operation, so you can hold the light in one hand and gesture at or touch the panel with the other. It's a practical feature when you're mid-correction and need a quick check without putting tools down.
What does the adjustable beam angle do?
The beam adjusts from a narrow 10° spot to a wide 70° flood. A tight beam concentrates intensity on a small area for detecting fine scratches and pinpoint defects, while a wider angle lets you sweep a larger panel section quickly during an initial assessment. You adjust focus by sliding the head of the light.
How long does the battery last?
Flex rates the runtime at approximately 2 hours, and batteries are included in the box. For most detailing sessions - even longer correction jobs - a single charge of batteries will cover you through multiple inspection passes on an entire vehicle.
Is it useful for checking ceramic coating or PPF prep work?
Absolutely. Ceramic coating and PPF application require the paint to be defect-free beforehand. The Swirl Finder helps you confirm there are no holograms from polishing, no remaining swirls and no contamination on the surface before you lay down a coating or film. It's equally useful for checking coating cure uniformity and catching any high spots.
Can it be used for interior inspection or only paint?
While it's engineered for paint surface inspection, the adjustable beam makes it useful anywhere you need focused light in tight spaces - checking interior trim for scratches, inspecting leather for scuffs, or looking at glass for wiper marks and haze. It's a versatile tool beyond just exterior paintwork.
How does it compare to using an overhead shop light or a detailing lamp?
A large detailing lamp or raking stand light is better for full-panel assessment of a whole car. The Flex Swirl Finder is a complement to those tools, not a replacement. Its value is portability and precision - you can take it to any corner of the vehicle, hold it at exactly the angle you need, and inspect a specific area that your overhead light can't reach effectively. Most professional detailers use both.