Tumi R.
Verified
Tar on the lower sills was properly baked on after a long highway run. Short dwell, one wipe, completely gone. Did the whole front end in about ten minutes before claying.
Soft99 Stain Cleaner Strong Type
R 150.00
- Dissolves tar, oil and insect residue
- Works on dwell time, no hard scrubbing
- Safe on factory clear coat and single-stage paint
- Leaves a bare, correction-ready surface
- Strong formula dissolves tar, oil and insect residue
- Dwell time lifts contamination without hard scrubbing
- Safe on clear coat, leaves surface correction-ready
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,715.00
Heavy Contamination
Cuts through what a car wash leaves behind
Tar spots, oil transfer, baked-on insect residue and heavy traffic film all share one thing in common - a regular wash won't touch them. Soft99 Stain Cleaner Strong Type gives you a targeted, dwell-based solution that dissolves hydrocarbon and organic contamination without resorting to aggressive mechanical scrubbing that risks marring your paint.
Why It Works
Built for real contamination
Not every stain responds to a wash mitt. This one does.
-
Strong-Type Formula
Targets heavy hydrocarbon and organic staining that a standard car shampoo cannot dissolve.
-
Dwell, Then Wipe
The chemistry does the lifting, so you avoid the aggressive scrubbing that causes swirl marks and marring.
-
Paint-Safe Application
Safe on factory clear coat and single-stage paint when used as directed, with no paint damage on a cool panel.
-
Correction-Ready Surface
Leaves the panel clean and bare, fully prepped for polishing, ceramic coating or PPF installation.
How It Compares
Strong-type decon vs. a standard tar remover
Not all tar and stain removers are formulated for heavy contamination. Here is how Soft99 Stain Cleaner Strong Type stacks up against a typical light-duty alternative.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Dissolves heavy tar and oil deposits | Yes | No |
| Effective on baked-on insect residue | Yes | No |
| Works via dwell time, no hard scrubbing | Yes | No |
| Safe on factory clear coat | Yes | Yes |
| Suitable for light surface contamination | Yes | Yes |
| Leaves a protective layer after use | No | No |
Prep Done Right
A bare, clean surface every time
Whether you are heading into paint correction, ceramic installation or laying down a wax, what you put on top is only as good as what is underneath. Used as the first targeted step in your decon process, this product ensures tar, oil and insect staining are fully lifted before your clay bar, iron remover or coating ever touches the panel.
Reviews
What our customers say
5.0
Based on 1 reviews
Questions
Frequently asked
How do I apply Soft99 Stain Cleaner Strong Type?
Apply the product to a clean, cool panel - ideally after a basic wash to remove loose dirt. Allow it a short dwell so the formula can break down the contamination, then wipe away with a clean microfibre. For heavy tar spots you can repeat the process before moving to your next decon step.
Is it safe on all paint types, including single-stage and modern clear coats?
Yes. The formula is safe on factory clear coat and single-stage paint when used as directed. Avoid prolonged contact or leaving it to dry on the surface, and always follow up with a rinse or wipe-down before applying any protection.
Can I use it on wheels, glass or plastic trim?
The product is formulated for body panels. If you plan to use it on wheels, glass or unpainted trim, test on a small inconspicuous area first. Some wheel coatings and anodised finishes may react differently to strong-type solvent formulas.
Does it need to be rinsed off after use?
After wiping away with a microfibre, wipe the area down with a damp cloth or follow immediately with your next decon or prep step. This ensures no residue remains before you apply a sealant, coating or polish.
Where does this fit in a full decon process?
Use it as the first targeted step after your initial wash, before iron fallout remover and clay bar. Knocking out tar and organic staining first means your iron remover and clay can focus on ferrous particles and bonded contamination rather than fighting through sticky hydrocarbon residue.
Can I use it before applying a ceramic coating or PPF?
Absolutely - that is one of its best applications. A clean, bare surface is critical before ceramic or PPF installation, and removing tar and oil staining at this stage prevents those contaminants from bonding under the coating. Follow up with a panel wipe or IPA wipe after use.
How long should I leave it to dwell before wiping?
A short dwell of roughly 30 to 60 seconds is usually sufficient for moderate staining. For heavier tar deposits or dried insect residue, allow up to 2 minutes. Do not let the product dry on the panel - work in the shade on a cool surface.
Does it leave any protective layer or coating behind?
No. The Stain Cleaner Strong Type is a decontamination and prep product. It leaves the surface clean and bare, which is exactly the point - you want zero residue before applying a wax, sealant, ceramic coating or proceeding with paint correction.