Guaranteed safe checkout
Total price R 670.00
Decon Done Right
Rail dust, industrial fallout, and tar spots don't come off with a wash - they bond to the clear coat and stay there until you clay. The Soft99 Smooth Egg Bar pulls that contamination out cleanly, leaving a surface smooth enough to coat, protect, or correct without compromise.
Why the Smooth Egg
Fine-grade performance with a form factor that actually works.
Pulls bonded fallout and rail dust without heavy marring on maintained paintwork.
The egg form keeps pressure even across panels, curves, and tight body lines.
Safe on clear coat, glass, and polished metal - one bar covers the whole exterior.
After claying and an IPA wipe-down, the surface is slick and primed to bond.
Smooth Egg vs Generic Clay
Not all clay bars are the same grade or shape. Here's how the Soft99 Smooth Egg compares to a typical generic clay bar you'd pick up without knowing the grade.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Dedicated fine-grade compound | Yes | No |
| Ergonomic shape for consistent palm pressure | Yes | No |
| Safe on clear coat paintwork | Yes | Yes |
| Effective on glass and polished metal | Yes | Yes |
| Reusable across multiple sessions | Yes | Yes |
| Backed by dedicated detailing R&D | Yes | No |
Built for Detailers
The egg shape isn't a gimmick - it sits naturally in your palm so the pressure you apply stays even across flat panels, curves, and tight edges. Knead it to a clean face between panels and you get a fresh cutting surface every time without wasting clay.
Reviews
Paint felt like sandpaper after highway driving for a few weeks. One session with this and a good lubricant and the surface was glassy. Clayed before laying down a ceramic and the coating bonded perfectly.
Questions
Wash and decontaminate the vehicle first with a pH-neutral shampoo. Flatten a piece of the clay into a disc, apply a generous layer of clay lubricant to one panel, then work the clay bar across the surface using light overlapping straight-line strokes. Once the clay glides freely and the panel feels smooth to the touch, buff off any lubricant residue with a clean microfibre. Fold the clay to a clean face before moving to the next panel.
The Smooth Egg Clay Bar is safe on clear-coated paintwork, glass, and polished metal surfaces including chrome. Avoid using it on matte or satin paint finishes, plastic trim, or rubber seals, as the clay's abrading action can alter the surface texture of these materials.
Yes - clay decontamination is a critical step before any ceramic coating application. The clay removes bonded contamination that a wash cannot shift, ensuring the coating bonds to clean, bare clear coat. Follow the clay stage with an IPA wipe-down to strip any remaining lubricant residue before applying the coating.
The Smooth Egg is a fine-grade clay, so on well-maintained paint it leaves minimal marring. On paint that already carries heavier contamination or swirls you may see some light hazing, which is normal. If you're claying before polishing or correction that marring will be removed in the correction stage anyway. If you're claying before a coating with no correction step, use a light machine polish after claying to ensure a flawless base.
Yes. After each panel, fold the clay over and knead it so a fresh, clean face is exposed. Discard the clay if it is dropped on the ground - any grit picked up can scratch paint badly. Store the clay in its original case or a sealed container with a few drops of clay lubricant to keep it pliable between uses.
Use a dedicated clay lubricant or a diluted quick-detailer spray. Never use the clay dry - insufficient lubrication causes the clay to drag, which can induce deeper marring or even clear coat damage. Water alone is generally not enough lubrication for most clay grades.
Run your clean fingertips across a freshly washed, dry panel. If the surface feels rough or gritty rather than glass-smooth, bonded contamination is present and claying is needed. You can also use the plastic bag test - place your hand inside a clean zip-lock bag and run it over the panel to magnify the texture.
Yes, it is effective on glass and polished metal surfaces such as chrome. For heavily contaminated alloy wheels, an iron fallout remover used before claying will do most of the heavy lifting and prolong the life of the clay. The Smooth Egg is a fine-grade clay, so it's best reserved for paint and glass rather than deeply contaminated wheel faces.
