Soft99 pH Neutral Iron Terminator
R 250.00
- pH-neutral, safe on ceramic coatings and sealants
- Colour-changing formula shows contamination being lifted
- Removes brake dust, rail dust and industrial fallout
- Ready to use on wheels and painted bodywork
- Turns purple on contact with iron contamination
- pH-neutral, won't strip coatings, wax or sealant
- Works on wheels, clear coat and painted bodywork
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,250.00
Chemical Decon
Dissolves iron fallout without lifting a finger
Iron Terminator pH Neutral reacts chemically with embedded iron particles, turning them into a water-soluble compound that rinses clean. The vivid purple colour change makes it easy to see exactly where contamination was hiding, so you know the surface is genuinely clean before you move on to correction or coating.
Why Iron Terminator
Professional decon, no guesswork
Four reasons detailers reach for this first.
-
Visible colour reaction
The formula turns purple-red on contact with iron particles, confirming contamination is being dissolved.
-
Coating-safe chemistry
pH-neutral means it will not strip ceramic coatings, sealants or waxes during routine decon.
-
Spray-on, rinse-off
No complicated process - spray, dwell, rinse, and the iron contamination goes with the water.
-
Wheels and bodywork
Safe on alloy wheels, painted panels and clear coat, covering every iron-prone surface in one product.
How it compares
Iron Terminator vs a typical iron remover
Not all iron removers are built the same. Here is how Iron Terminator pH Neutral stacks up against a standard acidic or high-pH alternative in the areas that matter to a detailer.
| Feature | DetailerSA | Alternative |
|---|---|---|
| pH-neutral formula | Yes | No |
| Safe on ceramic coatings and sealants | Yes | No |
| Colour-changing visual indicator | Yes | Yes |
| Safe for use on painted bodywork | Yes | Yes |
| Ready to use without dilution | Yes | Yes |
| Suitable for regular maintenance decon | Yes | No |
Protection-Friendly Formula
Decon without undoing your protection work
Because the formula is pH-neutral, Iron Terminator can be used on vehicles with existing ceramic coatings, sealants or waxes without stripping them. That makes it a practical tool for ongoing maintenance decon, not just pre-detail prep - keep the surface clean between details without starting from scratch each time.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
How do I apply Iron Terminator pH Neutral?
Spray directly onto the surface to be decontaminated, working on a cool panel out of direct sunlight. Allow the product to dwell for a few minutes - you will see the clear liquid turn purple-red as it reacts with iron particles. Rinse thoroughly with clean water. For heavily contaminated wheels, light agitation with a soft brush before rinsing helps lift stubborn deposits.
Is it safe to use on ceramic coatings and paint sealants?
Yes. The pH-neutral formula is specifically designed not to degrade or strip existing waxes, sealants or ceramic coatings. It is safe for routine decon on protected vehicles without compromising the protection layer underneath.
Can I use this on painted bodywork, or is it wheels only?
Iron Terminator is primarily developed for wheels but is fully safe on painted panels and clear coats. It is a practical choice before claying, polishing or applying a ceramic coating to bodywork, since it removes embedded iron fallout that a clay bar alone can push around rather than lift.
How long should I leave it to dwell before rinsing?
A dwell time of two to five minutes is typical. Watch for the purple-red colour change - once the reaction has spread across contaminated areas and the colour starts to stabilise, that is your cue to rinse. Do not allow the product to dry on the surface.
Does it need to be diluted?
No dilution is required. Iron Terminator pH Neutral is a ready-to-use spray product. Apply it straight from the bottle for best results.
Is it safe on clear coat and single-stage paint?
Yes. The pH-neutral chemistry means it will not etch, stain or dull clear coat or single-stage finishes when used as directed. Rinse promptly and do not allow it to dry, particularly in warm conditions.
Where does Iron Terminator fit in a full detail workflow?
Use it during the decontamination stage, after your pre-rinse or snow foam wash and before claying or polishing. On wheels, apply it before your main wheel cleaner or as part of a dedicated wheel detail. On bodywork, it is the first step of paint decon before clay, compound or coating application.
Will it remove all iron fallout in one application?
On lightly to moderately contaminated surfaces, a single application and rinse is usually sufficient. Heavily contaminated wheels or bodywork with built-up industrial fallout may benefit from a second application, or from pairing with a clay bar afterwards to remove any remaining bonded particles the chemical decon has loosened.