Innovacar SD1 Iron Shampoo
R 620.00
- Thixotropic gel clings to vertical surfaces
- Quickest iron decontaminant in the Innovacar range
- Doubles as a maintenance shampoo every 4 washes
- Safe on coatings and painted brake calipers
- Thixotropic gel clings to panels and rims
- Fastest iron decon in the Innovacar range
- Coating-safe and caliper-paint friendly
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,605.00
Thixotropic Decon
Iron fallout removal that stays where you put it
SD1 Iron Thixo Rapid's gel formula thickens on contact with the surface, keeping the active chemistry in place on vertical panels and rims instead of draining away. The colour-change reaction tells you exactly when it's working, and the slower drying time means you're not racing the clock on larger vehicles.
Why SD1
Built for the full decon routine
One formula handles ferrous fallout, limescale and regular wash maintenance.
-
Thixotropic Gel Formula
Thickens on the surface to cling to vertical panels and rims, maximising dwell time where it counts.
-
Fastest in the Range
SD1 is the quickest-acting iron decontaminant Innovacar produces, with a clear colour-change indicator.
-
Maintenance Shampoo Too
Dilute and use as a full car shampoo every four wash cycles at just 20 ml per vehicle.
-
Coating and Caliper Safe
Safe over cured ceramic coatings and will not alter the colour of painted brake calipers.
How does it stack up?
Innovacar SD1 Iron Shampoo vs a typical cheaper iron remover
Iron removers vary more than their price tags suggest. Here is an honest look at where the SD1 Iron Shampoo earns its place and where a budget alternative can keep up.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Colour-change indicator to confirm active decontamination | Yes | Yes |
| Thixotropic gel formula that clings to vertical panels and rims without running off | Yes | No |
| Extended dwell time for greater effectiveness on heavy ferrous fallout | Yes | No |
| Secondary limescale-removing action for hard-water areas | Yes | No |
| Doubles as a maintenance shampoo, reducing the number of products needed | Yes | No |
| Budget-friendly entry price per bottle | No | Yes |
Two Products in One
A decontaminant that earns its place every wash
Every four wash cycles, SD1 steps up from quick-rinse decon to full maintenance shampoo, reducing the number of products you need on the shelf without compromising on cleaning action. Its secondary limescale-removing effect and coating-safe formula make it a practical everyday choice for professional detailers and enthusiasts alike.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
How do I use SD1 as a decontaminant?
Pre-rinse the vehicle to remove loose dirt. Apply SD1 directly onto the wet surface - panels, rims or wheel arches - and allow it to dwell until the colour-change reaction appears, indicating active ferrous decontamination. Rinse off thoroughly. Average consumption is around 150 ml per vehicle at this stage.
How do I use SD1 as a maintenance shampoo?
Dilute SD1 in your wash bucket at your preferred ratio and wash the vehicle as you normally would. Innovacar recommends using it in this mode approximately every four wash cycles. Average shampoo consumption is around 20 ml per vehicle.
What surfaces is SD1 safe to use on?
SD1 is suitable for painted bodywork, wheels, wheel arches and painted brake calipers. It is confirmed coating-safe and will not alter the colour of painted calipers. As with any iron decontaminant, avoid use on bare, uncoated aluminium or raw steel surfaces.
What is the thixotropic effect and why does it matter?
A thixotropic formula behaves as a gel at rest but flows when agitated or applied. Once it hits the surface it thickens again, which means it clings rather than running straight off vertical surfaces like door skins, bumpers and rims. This gives the active chemistry more contact time where it is needed most.
How does SD1 differ from Innovacar's D1 Iron?
SD1 is the quickest-acting ferrous decontaminant in the Innovacar range and features the thixotropic gel formula, which D1 Iron does not. It also has a slower drying time than D1 Iron due to its concentration and dilution capacity, giving you more working time on larger vehicles or multiple panels.
Does SD1 remove limescale as well as iron fallout?
Yes. SD1 has a secondary limescale-removing action, which makes it particularly useful in areas with hard water or where water-spot deposits have accumulated alongside ferrous fallout.
Is SD1 safe to use over a ceramic coating?
Yes, SD1 is confirmed coating-safe. It will not strip or compromise a cured ceramic layer. It is a practical choice for the periodic decon step in a ceramic-coated vehicle's maintenance routine.
How do I know SD1 is working?
SD1 features a colour-change indicator. As it reacts with ferrous particles on the surface, the product changes colour - typically shifting towards purple or red - confirming that the iron decontamination process is active. Once the colour change stabilises or the dwell time is reached, rinse the surface thoroughly.