High pressure Lance 850mm
R 850.00
- 850mm length for extended reach
- Angled bar for easy panel access
- Rated to 400 bar / 6000 psi
- Max 150°C temperature tolerance
- Handles up to 400 bar / 6000 psi
- 850mm length reduces reach fatigue
- Rated to 150°C for hot-water machines
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,195.00
Built for the Job
Professional reach, without the awkward angles
At 850mm with an angled bar, this lance puts the nozzle exactly where you need it on lower panels, wheel arches and sills, without the wrist strain of fighting a shorter straight wand. Rated to 400 bar, it keeps up with high-output professional machines.
Why This Lance
Spec'd for professional use
Four reasons this is worth the upgrade over a budget replacement.
-
400 Bar Rated
Handles up to 400 bar / 6000 psi - well within the range of any professional pressure washer.
-
850mm Reach
Extra length reduces bending and fatigue when working on lower panels and large vehicles.
-
Angled Bar Design
The angled tip redirects the stream for easy access to wheel arches, sills and under-bumper areas.
-
150°C Tolerance
Fully compatible with hot-water pressure washers for degreasing and heavy contamination removal.
Lance vs Lance
How this stacks up against a basic budget replacement
Budget replacement lances can get the water flowing again, but they often cut corners on pressure rating and temperature tolerance. Here is a straight comparison on the specs that matter for professional use.
| Feature | DetailerSA | Alternative |
|---|---|---|
| 400 bar / 6000 psi pressure rating | Yes | No |
| Hot-water rated (up to 150°C) | Yes | No |
| 850mm length for extended reach | Yes | Yes |
| Angled bar for panel access | Yes | Yes |
| Direct replacement fit (check connector type) | Yes | Yes |
| Foam cannon included | No | No |
Hot-Water Ready
Rated to 150°C for serious degreasing work
Not all replacement lances tolerate hot-water pressure washers. This one is rated to 150°C, so it handles engine bay degreasing, traffic-film removal and heavy soiling where cold water alone won't cut it.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What pressure washers is this lance compatible with?
The lance is rated to 400 bar (6000 psi), so it will handle the output of most professional-grade pressure washers. You'll need to confirm that the inlet fitting on your machine matches the lance's connector before ordering - standard M22 and snap-fit connectors are the most common, but compatibility varies by brand.
Can I use this lance with a hot-water pressure washer?
Yes. The lance is rated to a maximum of 150°C, which covers the operating temperature of most hot-water (steam) pressure washers used in professional detailing and degreasing applications.
Why is an 850mm lance better than a shorter one?
The extra length means you can reach lower panels, door sills, and wheel arches without bending as far. On taller vehicles like SUVs and bakkies, it also reduces the angle you need to hold on upper panels. Less fatigue over a long detail session is the practical benefit.
What does the angled bar design actually do?
The angled section at the end of the lance redirects the water stream so you can address surfaces that are at an awkward angle relative to your hand position. It is particularly useful on wheel arches, under bumpers, and along rocker panels where a straight lance would require an uncomfortable wrist angle.
Is this a direct replacement for my existing lance?
It is sold as a replacement lance, but you must verify that the fittings on your pressure washer and trigger gun are compatible. If you are unsure, bring your existing lance or gun to the shop so the team can confirm the fit before you purchase.
Which nozzle tips work with this lance?
The lance itself is tip-agnostic - you fit the nozzle tip that suits the task. A 25° tip works well for general rinsing and pre-rinse decon stages, a 40° tip is safer for foam application, and a 0° or 15° tip is reserved for stubborn dirt on hard surfaces away from paint. Always avoid pointing a 0° tip at paintwork.
Will the lance work for applying snow foam with a foam cannon?
The lance itself does not include a foam cannon, and it is not a foam lance. However, a compatible foam cannon can be attached in place of a standard nozzle tip, provided the fittings match. Check that your foam cannon fits the lance's outlet before use.
How do I know when to replace my pressure washer lance?
Common signs are visible cracks in the barrel, a leak at any joint under pressure, a bent or deformed tube that affects the water stream direction, or a fitting that no longer seals properly against the trigger gun. Running a damaged lance is a safety risk at high pressures, so replace it as soon as you notice any of these issues.