550 GSM Microfibre Buffing Cloths (Sets)
R 635.00
- 550 GSM high-pile microfibre for maximum softness
- Lint-free and safe on all paint types
- 40×40 cm size for precise control
- Suited to waxes, sealants, quick detailers and coatings
- 550 GSM high-pile - lifts residue without dragging
- Streak-free, swirl-safe finish on all paint types
- Lint-free weave - no fibres left on the panel
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,785.00
High-Pile Finish
The cloth that doesn't undo your correction work
At 550 GSM, the high-pile weave is dense enough to absorb product residue on contact and soft enough to sit on freshly corrected paint without risk. These cloths are lint-free, streak-free and sized at 40×40 cm so you have real control across every panel.
Why These Cloths
Built for the finishing stage
Every spec here is chosen to protect paint, not just buff it.
-
Ultra-Soft High-Pile
The 550 GSM pile is dense enough to lift residue and gentle enough to leave corrected paint untouched.
-
Lint-Free Weave
No loose fibres left on the panel - just a clean, streak-free surface ready for inspection.
-
Show-Car Gloss
The high-pile finish enhances surface clarity on the final wipe, not just clears residue.
-
Paint-Safe Always
Safe on all paint types - factory, wrapped, PPF and freshly corrected finishes alike.
How They Stack Up
550 GSM microfibre vs a standard budget cloth
Not all microfibre cloths are equal. Here is how the 550 GSM high-pile compares to a typical low-cost cloth you might find in a grocery or hardware store.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Paint-safe on all surfaces | Yes | Yes |
| Lint-free finish | Yes | No |
| 550 GSM high-pile absorbency | Yes | No |
| Safe on freshly corrected paint | Yes | No |
| Suitable for ceramic coating removal | Yes | Yes |
| Streak-free on glass and paint | Yes | No |
Works Across the Range
From quick detailer to ceramic - one cloth handles it
Whether you are topping a sealant, spreading a quick detailer or levelling a fresh ceramic coating, these cloths move product efficiently and leave nothing behind. Fold to quarters for four clean faces per cloth and you keep your finish swirl-free from start to finish.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What products can I use these cloths with?
These cloths are suited to buffing off waxes, sealants, quick detailers and ceramic coatings. The high-pile weave picks up product residue cleanly without smearing, so they work through every stage of a finishing routine.
Are these cloths safe on freshly corrected or polished paint?
Yes. The ultra-soft, high-pile microfibre is gentle enough for freshly corrected paint where swirl sensitivity is at its highest. As long as the cloth is clean and free of contamination, it won't mar the finish.
Can I use these to remove ceramic coating residue?
Yes, these cloths are suitable for buffing ceramic coating high spots and residue before the coating fully cures. Always check the specific flash time on your coating and keep a clean cloth ready - swap faces or cloths frequently to avoid dragging loaded product back over the panel.
What size are the cloths?
Each cloth measures 40×40 cm. That size gives you enough surface area to work a panel efficiently while still being easy to fold and control by hand.
How do I get the most out of each cloth during a detail?
Fold the cloth into quarters so you have four usable faces. Work with one face until it is loaded with product residue, then flip to a fresh face. Once all four faces are used, set the cloth aside and move to a clean one. This keeps contamination off the paint and your finish consistent.
Are these cloths safe on other surfaces like glass, wheels and trim?
Yes, the soft microfibre is safe on glass, painted trim and clear-coated wheels when used for final buffing. Avoid using the same cloth across very different surfaces - keep separate cloths for paint and for wheels to prevent cross-contamination.
How should I wash and care for these cloths?
Machine wash in warm water with a dedicated microfibre detergent - avoid fabric softener, which clogs the fibres and reduces absorbency. Tumble dry on low heat or air-dry. Do not wash with cotton towels or abrasive materials that shed lint onto the microfibre.
Can these cloths be used with a machine polisher or are they hand-only?
These are finishing and buffing cloths designed for hand use - final wipe-down, residue removal and product spreading. For machine polishing you would use a backing plate and foam or microfibre polishing pad. These cloths are the step after the machine work is done.