Lake Country Glass Polishing Pads
R 185.00
- Removes light scratches and water spots from glass
- Compressed material absorbs compound, reduces product sling
- Fast cutting action lowers polishing heat
- Compatible with rotary and dual-action polishers
- Cuts light scratches and water spots from glass
- Fast cut reduces heat on the glass surface
- Works on rotary and DA polishers
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 9,730.00
Glass Correction
Purpose-built for polishing automotive glass
Standard foam pads are not built for glass - they overheat the surface and offer little control. Lake Country Glass Polishing Pads use a compressed material that absorbs compound cleanly, cuts efficiently, and keeps heat low enough to polish safely.
Why Lake Country Glass Pads
Engineered for safe glass correction
Four reasons professionals reach for these pads on glass work.
-
Fast Cutting Action
Removes light scratches and water spots quickly, reducing the time the pad spends on heat-sensitive glass.
-
Compressed Material
Porous enough to absorb compound fully, which cuts product waste and keeps sling under control.
-
Heat Management
Fast cut means less dwell time on the glass, lowering the risk of distortion or thermal cracking.
-
Dual-Tool Compatible
Rated for both rotary and DA polishers, so it integrates into any professional correction setup.
Glass Pad vs Generic Foam Pad
Not all pads are safe on glass
A standard foam cutting pad will technically spin on glass, but it was not engineered for it. Here is how these Lake Country pads compare to a typical generic foam alternative when used on automotive glazing.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Designed specifically for glass surfaces | Yes | No |
| Compressed material minimises product sling | Yes | No |
| Cuts light scratches and water spots | Yes | Yes |
| Compatible with rotary and DA polishers | Yes | Yes |
| Engineered to reduce heat build-up on glass | Yes | No |
| Safe for use on PPF or clear coat | No | Yes |
Tool Compatible
Consistent results on rotary and DA machines
Whether you run a rotary or a dual-action, these pads are rated for both - 1,000 to 1,500 RPM on a rotary, 3,000 to 4,500 OPM on a DA. That flexibility means one pad fits the workflow you already have.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What surfaces are these pads designed for?
These pads are specifically engineered for automotive glass surfaces - windscreens, side windows and rear glass. They are not intended for use on painted panels, PPF or trim.
What machine settings should I use?
On a rotary polisher, keep RPM between 1,000 and 1,500. On a dual-action polisher, set OPM between 3,000 and 4,500. Staying within these ranges helps control heat and avoids overworking the glass.
Why do I need to keep the glass wet?
Glass has very low thermal tolerance compared to paint. Dry polishing builds heat rapidly and can cause distortion or cracking. Always prime the pad and keep the working area wet with a glass polish or water throughout the process.
What type of defects can these pads remove?
They are rated for light scratches and water spots on glass. Deep chips, cracks or heavy etching are beyond what any polishing pad can correct and require professional glass replacement.
Can I use these with any glass polish or compound?
Yes. The compressed material is designed to absorb compounding product effectively, reducing sling and waste. Use a glass-specific polish or compound for best results - general paint correction compounds may leave residue on glass.
How do I clean and maintain the pads between uses?
Rinse the pad thoroughly with clean water after each use to remove compound residue. Allow it to air-dry before storage. Avoid harsh detergents that could break down the compressed material structure.
Can I use a glass sealant or ceramic coating after polishing with these pads?
Yes. Once you have finished the correction stage and cleaned the glass, it is an ideal time to apply a glass sealant or hydrophobic glass coating. The polished surface will bond more uniformly with the protection product.
How many uses can I expect from one pad?
Pad life depends on how aggressively you work and how well you clean the pad between sessions. The compressed material is durable, but inspect the pad regularly for uneven wear or deterioration and replace it when the surface is no longer consistent.