Koch Chemie Heavy Cut Foam Pad
R 235.00
- Removes deep scratches and heavy weathering
- Firm 25mm height for low torsion and stable handling
- Open-cell reticulation maximises cut and hygiene
- Milled edge flexes around curves and contours
- Cuts deep scratches and heavy weathering fast
- 25mm height keeps torsion low for stable control
- Open-cell foam stays clean and abrasive longer
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 9,690.00
Heavy Correction
One pass. Deep defects gone.
The Koch-Chemie Heavy Cut Foam Pad brings the cut where you need it most - on paint that has seen years of swirls, heavy weathering or deep scratches. High-density foam holds its compression hardness across a full polishing session so the abrasive load stays consistent from the first panel to the last.
Why This Pad
Engineered for Heavy Cut Work
Every design decision on this pad is built around maximum cut with maximum control.
-
Maximum Cut
High-density open-cell foam delivers aggressive abrasiveness for removing deep scratches and heavy weathering.
-
Low Torsion Design
The 25mm height keeps torsion forces low, giving you stable, predictable machine handling across every panel.
-
Lasting Compression
Special foam density maintains compression hardness throughout long polishing sessions without premature breakdown.
-
Contour Flexibility
The milled outer edge flexes to follow body lines and curves so correction stays even right to the panel edges.
How It Stacks Up
Koch-Chemie Heavy Cut Pad vs. a Typical Budget Cutting Pad
Not all cutting pads are built the same. Here is how the Koch-Chemie Heavy Cut Foam Pad compares against a standard budget foam cutting pad on the features that matter for serious correction work.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Optimised open-cell reticulation for hygiene and cut | Yes | No |
| Engineered 25mm height to reduce torsion forces | Yes | No |
| Milled edge for contour flexibility | Yes | No |
| Suitable for use with a DA or rotary polisher | Yes | Yes |
| Available in multiple colours for process identification | Yes | Yes |
| Maintains compression hardness under extended use | Yes | No |
Built for Control
Stable pad, confident correction.
At 25mm tall, this pad keeps torsion forces low and the backing plate in command - so you spend less time chasing the machine across the panel and more time actually correcting paint. The milled edge flexes around curves and contours that a stiffer pad would bridge over.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What machine polisher is this pad designed for?
The Koch-Chemie Heavy Cut Foam Pad is designed for use with rotary and dual-action (DA) machine polishers. The 25mm height and high-density foam are optimised for machine use - hand application with a heavy cut compound is unlikely to generate the heat and pressure needed for effective correction.
Which Koch-Chemie compound should I pair this pad with?
This pad is intended to be used with Koch-Chemie's Heavy Cut compound. The high-density, open-cell foam is tuned to work alongside that compound's abrasive load, maintaining consistent cut throughout the polishing cycle. Using it with a lighter compound will reduce the pad's effectiveness.
What defects can this pad remove?
The Heavy Cut Foam Pad is built for heavy correction - strong weathering, oxidation, deep scratches and pronounced swirl marks. It is a stage-one correction pad, so follow up with a medium or finishing pad and appropriate compound to refine the surface before applying any sealant or ceramic coating.
Is the pad safe on all paint types, including single-stage and dark colours?
Yes, the pad is suitable for use on clear-coated, single-stage and dark-coloured paint, but because this is a heavy cut pad you should work carefully on thin or delicate paint systems. Always check paint depth readings before aggressive correction and start with a small test area to gauge the cut level on that specific paint.
Can I use this pad on PPF or vinyl wrap?
No. The Heavy Cut Foam Pad is designed for paint correction on hard clear-coat or single-stage paint. Using a heavy cut pad on PPF or vinyl wrap risks cutting through the film surface. For PPF light correction, use a dedicated film-safe pad and a light or finishing compound only.
How do I clean the pad after use?
The optimised open-cell (reticulated) structure makes the pad easier to clean than a closed-cell foam. Rinse the pad under warm water during your session to clear compound residue, and use a pad-cleaning brush or pad washer attachment after polishing. Allow the pad to air-dry fully before storing. Avoid wringing or twisting the foam as this can damage the cell structure.
Why is the pad height only 25mm?
The short 25mm height is a deliberate design choice. A lower-profile pad generates less torsion force between the backing plate and the paint surface, which translates to more predictable, stable handling - especially on a rotary polisher. It also reduces the risk of the pad folding or deflecting under pressure, keeping the abrasive face flat and consistent against the paint.
What does the milled edge do?
The milled edge around the circumference of the pad removes material in a way that adds flexibility at the pad's outer edge. This allows the pad to flex and conform more easily when working around body lines, contours, bumpers and other curved surfaces, reducing the chance of high spots or uneven correction at the panel edges.