Fra-Ber Ceramic Shampoo (Dilution 1:50)
Sale price
R 250.00
Regular price R 320.00
- SiO2 formula boosts gloss with every wash
- Hydrophobic layer develops on rinse no sealant step needed
- Highly concentrated at 1:50 dilution
- Safe on coated and uncoated surfaces
- SiO2 ceramic protection built into every wash
- Hydrophobic sheeting visible on rinse, every time
- Boosts gloss on coated and bare paintwork alike
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,301.00
One Step Wash
Clean, protect and gloss in a single pass
Bersolwax packs SiO2 ceramic technology into a highly concentrated shampoo so every wash leaves paintwork cleaner and more hydrophobic than when you started. There is no separate topper step - the protection goes on during the rinse.
Why Bersolwax
More than a shampoo
Four reasons detailers keep it on the shelf.
-
Coating-safe formula
No EDTA or NTA means it maintains ceramic and wax coatings without gradually wearing them down.
-
Instant hydrophobics
Water-repellent sheeting is visible during the rinse phase - no extra product needed after drying.
-
Gloss on every wash
SiO2 actives enhance gloss on both coated and bare paintwork with each maintenance wash.
-
1:50 concentration
One litre yields up to 50 L of solution, keeping cost-per-wash low across high-volume jobs.
How does it stack up?
Fra-Ber Ceramic Shampoo vs a typical budget car shampoo
Budget shampoos clean your car. Fra-Ber Bersolwax cleans, adds gloss and lays down a water-repellent layer in the same step. Here is an honest look at where the two differ and where they are on equal footing.
| Feature | DetailerSA | Alternative |
|---|---|---|
| SiO2 ceramic technology that deposits hydrophobics with every wash | Yes | No |
| Safe on existing ceramic and wax coatings without stripping them | Yes | No |
| Highly concentrated formula - 1 L makes up to 50 L of solution | Yes | No |
| Effective panel lubrication and foam for scratch-safe washing | Yes | Yes |
| Compatible with all vehicle types including bakkies, vans and motorbikes | Yes | Yes |
| Available in a large 4.54 L format for high-volume or fleet use | Yes | No |
Built for Volume
1 L goes further than you think
At a 1:50 dilution ratio, a single litre of Bersolwax yields up to 50 L of ready-to-use shampoo - enough for a fleet, a busy mobile setup, or months of weekend washing. The 4.54 L format pushes that even further for high-throughput detailing businesses.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What is the correct dilution ratio for Bersolwax?
Dilute at 1:50 - one part Bersolwax to fifty parts water. At that ratio a single 1 L bottle yields up to 50 L of ready-to-use wash solution. For a standard two-bucket wash, a small measure goes a long way.
Is Bersolwax safe to use over an existing ceramic coating?
Yes. Bersolwax is formulated to maintain ceramic and wax coatings rather than strip them. The pH-balanced formula cleans without undermining the bond of a cured ceramic layer, and the SiO2 top-up with each wash actually helps sustain hydrophobic performance between scheduled maintenance details.
Can I use Bersolwax on untreated or bare paintwork?
Absolutely. The ceramic SiO2 agents deposit a light water-repellent layer on untreated surfaces with each wash. It will not replace a dedicated ceramic coating or wax in terms of longevity, but it meaningfully improves gloss and hydrophobics on daily drivers that have no existing paint protection.
What vehicles is Bersolwax compatible with?
Fra-Ber lists compatibility with cars, sports cars, vans, camper vans, trucks and motorbikes. The gentle, lubricious foam makes it suitable for any vehicle where you want safe panel cleaning without abrasion or streaking.
Do I need to apply a separate sealant or topper after washing with Bersolwax?
No additional sealant step is required. The hydrophobic layer develops naturally as the rinse water sheets off the panel. If your coating schedule calls for a dedicated spray sealant or ceramic topper, you can still apply one after drying - Bersolwax does not interfere with toppers or LSPs applied afterwards.
Is Bersolwax suitable for use with a foam cannon or pressure washer pre-soak?
Bersolwax is primarily designed for the wash bucket at the 1:50 dilution, but many detailers experiment with richer dilutions in a foam lance for a contact-wash pre-soak. Fra-Ber does not specify a cannon dilution, so start conservatively and dial in the ratio to suit your equipment and foam preference.
What does 'no added EDTA or NTA' mean for my coating or paint?
EDTA and NTA are chelating agents used in some shampoos to soften water and boost cleaning. At high concentrations they can gradually degrade wax and some coating binders. Fra-Ber has formulated Bersolwax without these additives, which makes it a safer long-term maintenance shampoo for coated paintwork.
What sizes is Bersolwax available in?
Bersolwax is available in a 1 L bottle and a 4.54 L container. The larger format is the better value for professional detailers, mobile washers and anyone running a high-volume wash setup where a 1:50 concentrate disappears quickly.