Foam Cannon Connector M22x1.5mm Male Thread with 14mm Internal Diameter
R 110.00
- Solid brass, corrosion-resistant construction
- M22x1.5mm male thread, 14mm internal diameter
- Precision-machined for a leak-free, high-pressure fit
- Direct replacement or M22 adapter for foam cannons
- Handles high-pressure without leaking or loosening
- Solid brass resists corrosion under constant water exposure
- M22x1.5mm male thread, 14mm bore - fits or replaces exactly
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 685.00
Precision Fit
No leaks. No pressure drop. Just foam.
A poorly fitted connector bleeds pressure before it even reaches the cannon, ruining foam thickness and coverage. This solid brass M22x1.5mm fitting is machined to sit tight and seal completely, keeping every bar of pressure working for you.
Why It Works
The right fitting makes everything else perform
Small part, big impact on your foam setup.
-
High-Pressure Rated
Brass construction holds up under the pressure output of professional-grade washers without seeping or working loose.
-
Exact Thread Spec
M22x1.5mm male thread and 14mm internal bore - dimensionally correct for a proper M22 connection.
-
Corrosion Resistant
Solid brass shrugs off constant water exposure and chemical contact from pre-wash and decon products.
-
Tool-Free Install
Compact design threads on by hand and seats without needing specialised fittings equipment.
How It Compares
Brass vs a generic plastic fitting
Not all M22 connectors are made the same. Here's how this brass fitting stacks up against a typical cheap plastic alternative you'd find in a hardware bin.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Corrosion-resistant material | Yes | No |
| Handles repeated high-pressure cycles | Yes | No |
| Precision-machined M22x1.5mm threads | Yes | No |
| M22 thread compatibility | Yes | Yes |
| Tool-free hand installation | Yes | Yes |
| Rated temperature for hot-wash use (stated spec) | No | No |
Built to Last
Brass construction that handles the job site
Plastic fittings crack under repeated high-pressure cycles and corrode when they meet the chemicals in your decon or pre-wash routine. Solid brass stays dimensionally stable, seals consistently, and doesn't fail mid-wash.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which pressure washers is this connector compatible with?
This connector suits any pressure washer that uses an M22 female port. The thread spec is M22x1.5mm male, and the internal diameter is 14mm - confirm your machine's port matches both before ordering.
Will this work with my existing foam cannon?
It will work with foam cannons that accept an M22x1.5mm male inlet fitting. Check the thread spec on your cannon's inlet - if it matches M22x1.5mm female, this connector will fit.
Do I need any tools to install it?
No specialised tools are required. Thread it on by hand until snug, then use a spanner for a final quarter-turn to ensure a leak-free seal. Avoid over-tightening, which can damage the threads.
Is the 14mm internal diameter important?
Yes - the internal diameter determines water flow through the fitting. Using a connector with the wrong bore can restrict flow, reduce pressure at the cannon nozzle, and result in thin or inconsistent foam output. Always match the diameter to your equipment's specification.
Why brass and not plastic or stainless?
Brass machines to tight tolerances, handles repeated pressure cycles well, and resists the corrosion that comes with constant water exposure and chemical contact during decon and foam stages. It is the industry-standard material for pressure washer fittings at this spec.
Should I use thread tape or a sealant?
For a perfectly machined thread like this one, PTFE thread tape is optional but recommended if you want belt-and-braces confidence against any seepage. Wrap two or three layers in the direction of the thread before fitting.
Can I use this connector with a foam lance and a gun, not just a direct cannon?
The connector is designed to interface between a foam cannon and the pressure washer outlet. If your lance or gun setup uses M22 female ports at the relevant junction, it will fit - verify the thread and diameter spec at every connection point in your setup.
Is this connector suitable for hot-water pressure washers?
Brass handles elevated temperatures well and is used in many commercial hot-wash fittings. That said, the source specification does not state a maximum temperature rating, so confirm your machine's output temperature is within normal commercial hot-wash ranges before use.