Foam Cannon Connector for Karcher HD (HDS) Pro: M22x1.5mm Female Thread
R 140.00
- M22x1.5mm female thread, precise fit
- Brass construction resists corrosion
- Compatible with Karcher HD and HDS Pro
- Maintains stable flow for consistent foam
- M22x1.5mm thread locks on with zero play or leaks
- Brass resists corrosion in high-pressure chemical wash use
- Direct fit for Karcher HD and HDS Pro machines
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 885.00
Precision Fit
No leaks, no pressure drop, no fuss
The M22x1.5mm female thread on this brass connector mates exactly with Karcher HD and HDS Pro outlets, giving you a solid, rattle-free link that holds at full operating pressure so your foam cannon delivers consistent, thick foam every wash.
Why This Connector
Every detail matters in a professional setup
A small fitting that has a big effect on your foam cannon's performance.
-
Leak-Free Thread
The precise M22x1.5mm machined thread seals tight and stays that way under sustained pressure.
-
Corrosion Resistant
Brass construction withstands repeated contact with alkaline snow foams and acidic wheel cleaners without corroding.
-
Stable Flow Rate
A secure connection means no partial blockages or pressure drops that thin out your foam mix.
-
Professional Grade
Rated for the demanding, high-frequency use that Karcher HD and HDS Pro machines are put through in a working detail bay.
Brass vs Generic
Why the material and thread spec matter
Not all foam cannon connectors are equal. Here is how this MJJC brass adapter compares to a typical generic plastic or low-grade connector.
| Feature | DetailerSA | Alternative |
|---|---|---|
| M22x1.5mm precision thread | Yes | Yes |
| Brass construction | Yes | No |
| Corrosion resistance under chemical exposure | Yes | No |
| Rated for professional heavy-duty use | Yes | No |
| Fits Karcher HD and HDS Pro machines | Yes | Yes |
| Long service life under frequent fitting and removal | Yes | No |
Built to Last
Brass that handles daily workshop punishment
Where plastic connectors crack and corrode, high-quality brass shrugs off the combination of high pressure, repeated chemical exposure, and constant fitting and removal that professional detailing puts on every component.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which Karcher machines does this connector fit?
This connector is designed for Karcher HD and HDS Pro professional pressure washers fitted with an M22x1.5mm outlet. If your Karcher machine uses that outlet thread, this adapter is the right fit. Consumer-grade Karcher models often use a different quick-connect system, so check your machine's outlet spec before ordering.
What thread spec is this connector?
It uses an M22x1.5mm female thread. That means the connector screws onto a male M22x1.5mm outlet on your pressure washer. This is a standard thread on many Karcher HD and HDS Pro commercial and professional units.
What is the connector made from?
The connector is machined from high-quality brass. Brass is the preferred material for pressure washer fittings because it handles sustained high pressure, resists corrosion from water and chemical contact, and outlasts plastic alternatives in workshop conditions.
Will this work with any foam cannon, or only MJJC foam cannons?
The connector attaches to your Karcher HD or HDS Pro pressure washer outlet. Compatibility on the foam cannon side depends on what thread or fitting your cannon uses. MJJC foam cannons are designed to work with MJJC connectors, but check the cannon-side interface on your specific unit if you are using a different brand of cannon.
How do I install this connector?
Thread the female end onto the M22x1.5mm male outlet of your Karcher HD or HDS Pro. Hand-tighten until snug, then give it a firm turn with an appropriate spanner if needed. Do not over-torque brass fittings. Once secure, attach your foam cannon to the other end of the connector and you are ready to run.
Can I use this connector at full operating pressure?
Yes, it is rated for professional and heavy-duty use, which covers the operating pressures of Karcher HD and HDS Pro machines. The brass construction and precision thread ensure the connection holds under sustained high-pressure output without leaking.
Is this a replacement part or does it come included with a foam cannon?
This connector is sold as a standalone replacement or spare part. It is useful if your original connector has worn threads, corrosion, or a persistent leak, or if you want a spare to keep your setup running without delay.
How do I know if my machine has an M22x1.5mm outlet?
Check your Karcher machine's manual or the outlet port itself. Many Karcher HD and HDS Pro professional pressure washers use the M22x1.5mm thread as standard on their lance or hose outlet. If you are unsure, measure the outlet thread diameter (22mm across the thread peaks) and confirm the pitch is 1.5mm before ordering.