Wheels on my sedan were caked in brake dust - half the rims turned deep violet within a minute. Rinsed off with no scrubbing and the alloys looked brand new.
Detailing Corporation Fallout Remover 1L
- pH-neutral, safe on paint, glass and rims
- Turns violet on contact with metallic contamination
- Dwells 3-6 minutes, rinses clean without scrubbing
- Essential pre-correction decon step
- Visible violet reaction confirms iron contamination removed
- pH-neutral, safe on paint, glass and alloy rims
- Rinses clean in one pass, no aggressive scrubbing needed
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,166.00
Iron Decontamination
See the contamination dissolve in real time
The reactive formula turns a deep violet wherever it contacts iron particles, brake dust or superficial rust - giving you a clear visual confirmation that the chemistry is working, not just sitting on the surface. No guesswork, no scrubbing blind.
Why It Works
Built for Serious Decon
Four reasons professionals keep this in their decon kit.
-
Reactive Chemistry
Chelating agents bind to iron ions and turn violet, showing you exactly where fallout contamination is present.
-
pH-Neutral Formula
Safe for repeated use on clear coat, glass and alloy rims without the risk of etching or dulling.
-
Surfactant Encapsulation
Special surfactants coat loosened particles so contaminants rinse away cleanly without aggressive agitation.
-
3-6 Minute Dwell
Extended contact time dissolves stubborn, burnt-in particles that a wash alone cannot shift.
How It Compares
Fallout Remover vs. a Generic Iron Remover
Not all iron removers are equal. Here is how Detailing Corporation Fallout Remover stacks up against a typical budget alternative.
| Feature | DetailerSA | Alternative |
|---|---|---|
| pH-neutral formula | Yes | Yes |
| Visible violet colour change indicator | Yes | No |
| Safe for use on glass | Yes | Yes |
| Special surfactants for easy rinsing | Yes | No |
| Safe on polished aluminium (test first) | No | No |
| Extended 3-6 minute dwell time | Yes | No |
Safe On Every Surface
pH-neutral formula, no compromises
Fallout Remover is formulated pH-neutral so it can be used on paint, glass and alloy rims without the risk that comes with acidic or alkaline alternatives. Special surfactants disperse loosened contaminants so a thorough rinse is all that is needed to leave the surface clean and ready for the next step.
Reviews
What our customers say
Proper iron remover. The colour change is impressive and tells you exactly where the contamination is sitting. Used it before claying and the clay bar stayed clean far longer than usual.
pH-neutral was the main draw for me - I do ceramic coatings regularly and needed something safe for pre-coating decon. Does the job well, just agitate on stubborn spots and rinse thoroughly.
Runs through every decon detail I do now. Rims, paint, glass - one product handles all three without swapping chemicals. Arrived well packaged and the trigger spray was already fitted. 🙌
Three washes in a row didn't shift the rust-coloured spots on the lower panels. This did, in one dwell. Not magic, but it handles the contamination a shampoo simply cannot.
Essential decon step, full stop. Spray on, watch it bleed violet, rinse off. The surfactants do their job and nothing is left behind that might interfere with the sealant going on after.
Questions
Frequently asked
How do I apply Fallout Remover?
Spray the product undiluted and evenly onto a cool, dry surface. Let it dwell for 3-6 minutes - you will see it turn violet where it contacts ferrous particles. Agitate with a soft brush or sponge if contamination is heavy, then rinse thoroughly with water.
Is it safe to use on paintwork?
Yes. The formula is pH-neutral, so it is safe for use on clear-coated and painted surfaces when used as directed. Always ensure the surface is cool to the touch and rinse thoroughly after the dwell period. Avoid letting it dry on the paint.
Can I use it on wheel rims?
Absolutely - wheel rims are one of the primary use cases. The formula cuts through brake dust and iron fallout effectively on alloy rims. The source advises testing on polished aluminium in an inconspicuous area first, as polished aluminium can be sensitive.
Is it safe on glass?
Yes, Fallout Remover is suitable for use on glass surfaces. It is a useful step before applying a glass sealant or ceramic glass coating, ensuring the surface is free of ferrous contamination that would otherwise sit beneath the sealant.
What does the violet colour change mean?
The reactive agents in the formula chelate with iron ions from brake dust, fallout and superficial rust, forming a water-soluble complex that appears violet. The more intense the colour change, the heavier the ferrous contamination present. It is a useful indicator that the product is actively dissolving the particles.
Do I need to dilute it?
No. Fallout Remover is used undiluted, straight from the bottle. Diluting it would reduce the reactivity and dwell effectiveness. Simply spray it on as supplied.
How long should I leave it on the surface?
Allow approximately 3-6 minutes of contact time. Do not let the product dry on the surface - if it starts to dry before rinsing, lightly mist with water to reactivate it and rinse immediately. Never apply to hot panels or in direct sunlight.
Where does Fallout Remover fit in the detailing process?
It is a decon step, best used after a pre-rinse or snow foam wash and before clay bar treatment or paint correction. Removing ferrous contamination before claying significantly reduces the contamination load on the clay, extends its life and gives you a cleaner surface going into polishing or coating.



