Double 1/4" inch BSP Threads Connection Bar
R 90.00
- Double 1/4" BSP male threads on both ends
- Precision-machined, leak-resistant metal construction
- Compatible with foam cannons, connectors and adapters
- Handles high-pressure washer applications
- Double 1/4" BSP male threads, wide adapter compatibility
- Corrosion-resistant metal, built for high pressure
- Maintains consistent pressure and foam output
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 1,290.00
No more leaks
One fitting that ties your whole setup together
A mismatched thread or a worn connector is enough to kill foam output and leave you fiddling mid-wash. This precision-machined 1/4" BSP connection bar gives you a solid, leak-free bridge between your foam cannon and whatever adapter or quick-release fitting your pressure washer uses.
Why it works
Four reasons this fitting earns its place
Small part, real impact on your wash setup.
-
Universal BSP thread
1/4" BSP male threads on both ends match the majority of foam cannons and pressure washer adapters.
-
Leak-free seal
Precision machining ensures threads mate cleanly, keeping pressure consistent and foam output steady.
-
High-pressure rated
Engineered for the pressures professional and home detailers run, with no flex or failure under load.
-
Quick installation
Thread it in by hand in under a minute - no specialist tools, no complicated assembly.
How it stacks up
MJJC connection bar vs a generic plastic fitting
Not all fittings are equal. Here is how this machined metal bar compares to the budget plastic connectors that often come bundled with entry-level foam cannons.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Corrosion-resistant metal construction | Yes | No |
| Precision-machined threads | Yes | No |
| Rated for high-pressure applications | Yes | Yes |
| 1/4" BSP compatibility | Yes | Yes |
| Leak-resistant seal without filler | Yes | No |
| Resistant to cracking under pressure | Yes | No |
Built to last
Corrosion-resistant metal for the long haul
Cheap plastic fittings crack under pressure and corrode with repeated wet use. This bar is machined from corrosion-resistant metal, so it holds its seal wash after wash without swelling, warping or thread stripping.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
What thread standard does this connection bar use?
Both ends are 1/4" BSP (British Standard Pipe) male threads. BSP is the most common thread standard on foam cannons, quick-release fittings and pressure washer adapters sold in South Africa, so compatibility is broad.
Will this fit my foam cannon?
If your foam cannon has a 1/4" BSP female inlet, yes. Most MJJC foam cannons and a wide range of aftermarket cannons use this thread. If you are unsure, check the thread spec printed on your cannon or existing adapter.
Can I use this with a quick-release fitting on my pressure washer lance?
That is the primary use case. The bar sits between the foam cannon and a quick-release connector, giving you the male thread each side needs to mate up securely. It removes the need to force incompatible fittings together.
What pressure rating can it handle?
The bar is designed for high-pressure washer applications. It is intended for use with domestic and professional-grade pressure washers at the pressures typically used in car detailing. Do not use it beyond your washer's rated output.
Is any sealing tape or compound needed on the threads?
PTFE thread tape is recommended on BSP fittings to ensure a fully leak-free seal, especially at higher pressures. Wrap two or three layers of tape around each male thread before assembly. The precision machining gives a tight fit, but tape removes any residual weep.
What is it made from?
It is constructed from corrosion-resistant metal. This makes it suitable for the wet, high-pressure environment of regular detailing without rust or degradation affecting the seal over time.
How do I install it?
Apply PTFE tape to each male thread, then hand-thread one end into your foam cannon inlet and the other into your adapter or quick-release connector. Tighten firmly by hand, then give a quarter-turn more with a spanner if needed. Do not overtighten, as this can damage the threads.
Can this connection bar be used with adapters other than foam cannons?
Yes. Anything with a 1/4" BSP female port can accept this bar. It works equally well linking pressure washer wand adapters, inline filters, extension bars or any other 1/4" BSP accessory in your setup.