AP2 Ultra Soft Foam Applicator
R 45.00
- 8cm diameter, 1cm thick foam pad
- Ultra-soft microfibre cover, safe on fresh paint
- Finger slot for precise coating control
- Designed for Gtechniq ceramic and sealant coatings
- Ultra-soft microfibre, safe on freshly corrected paint
- Finger slot keeps your grip steady on every panel
- Sized for thin, even ceramic coating layers
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 295.00
Precision application
Put coating exactly where it needs to go
The AP2's integrated finger slot and 8cm microfibre face give you direct, tactile control over every stroke, so coating lands in a thin, consistent layer rather than pooling at the edges or skipping in the centre.
Why the AP2
No compromises on coating application
Every detail matters when you are laying down a ceramic coating.
-
Ultra-soft microfibre
Dense microfibre cover spreads coating without scratching or marring freshly corrected paint.
-
Finger slot control
Built-in finger slot lets you apply even pressure across curved and flat panels alike.
-
Correct pad sizing
8cm diameter encourages thin, even ceramic layers and makes flash time easier to manage.
-
Coating-specific design
Engineered specifically for Gtechniq ceramic and sealant coatings, not a generic foam block.
AP2 vs generic applicators
Not all foam applicators are equal
A sponge block or generic foam applicator can apply coating, but the AP2 is built around how ceramic coatings actually behave - their viscosity, flash time and sensitivity to uneven pressure.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Ultra-soft microfibre cover | Yes | No |
| Integrated finger slot for grip | Yes | No |
| Matched to ceramic coating viscosity | Yes | No |
| Can apply coating to a panel | Yes | Yes |
| Works on paint, glass and trim | Yes | Yes |
| Machine-pad compatible | No | No |
Built for ceramics
The right tool for Gtechniq coatings
Generic foam blocks can drag, pill or shed fibres into fresh coating. The AP2's dense foam core and ultra-soft microfibre cover are matched to the viscosity of ceramic coatings, spreading product cleanly without disrupting the panel surface.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which coatings is the AP2 compatible with?
The AP2 is designed specifically for applying Gtechniq coatings - products like C1 Crystal Lacquer, C2 Liquid Crystal and ExoV5. It works well with other liquid ceramic coatings and synthetic sealants applied by hand, but it is not intended for abrasive compounds or polishes.
How do I load the AP2 with coating?
Apply a few drops of coating directly to the microfibre face of the pad rather than onto the panel. This keeps application controlled and prevents over-saturation. Work in small sections - roughly 40cm x 40cm - and reload as needed. Less product per pass gives a more uniform layer and makes flash time easier to manage.
Can I use the AP2 on surfaces other than paint?
Yes. The ultra-soft microfibre is safe on glass, painted surfaces, trim and wheels, provided the coating you are applying is also rated for those surfaces. Always follow the coating manufacturer's surface compatibility guidance rather than the applicator's.
Does the finger slot make a real difference?
It does. The slot lets you apply consistent downward pressure with one finger while keeping the pad flat against the panel. This is particularly useful on curved sections like bumpers and door mirrors, where a loose grip tends to tip the pad and leave uneven product distribution.
How do I clean and maintain the AP2?
After use, rinse the pad immediately with a suitable panel wipe or IPA solution before the coating cures on the microfibre. Once cured, ceramic product is very difficult to remove and will harden the fibres. Keep one AP2 per coating product to avoid cross-contamination between coatings or toppers.
How many applications can I get from one AP2?
With proper care and immediate cleaning after each session, the AP2 can be reused multiple times. However, many professional detailers treat applicators as consumables and use a fresh pad per vehicle coating job to ensure no contamination from previous sessions affects the new coating's bonding.
Can the AP2 be used with a machine polisher or DA?
No. The AP2 is a hand applicator. It does not have a backing plate attachment point, and the 8cm diameter and 1cm thickness are designed for manual, controlled spreading. For machine-assisted coating application, you would need a purpose-built machine pad.
Does the size of the AP2 affect how much coating I use per panel?
The 8cm diameter is intentionally sized to encourage working in smaller, manageable sections. This helps you apply thinner, more even layers, which is critical with ceramic coatings where excess product can high-spot during flash time. Smaller applicators naturally discourage over-application compared to larger foam blocks.