Marius Labuschagne
Verified
Great compound for most applications
Zvizzer Heavy Cut HC 2000
R 490.00
- Removes P2000 sanding marks in one pass
- Compatible with DA and rotary polishers
- No fillers true, measurable correction
- Safe on fresh and cured scratch-resistant clear coats
- Cuts P2000 sanding marks and deep scratches fast
- Filler-free - correction you can actually measure
- DA and rotary compatible, safe on scratch-resistant coats
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 2,640.00
Heavy Paint Correction
Cut fast. Cut clean. No compromise.
HC 2000's homogeneous abrasive technology removes P2000 sanding marks and deep scratches in a controlled, predictable cycle - whether you're on a DA or a rotary. Because there are no fillers, you see exactly what the correction has achieved the moment you wipe the panel down.
Why HC 2000
Serious cut, clean chemistry
Built for detailers who need to measure the result, not guess at it.
-
Fast Defect Removal
Uniform abrasive particles bite into P2000 sanding marks and deep scratches quickly, reducing machine time per panel.
-
Filler-Free Result
No fillers or silicones - the finish you see after wiping is the true corrected paint surface, every time.
-
Safe on All Paint Types
Compatible with fresh refinishes and fully cured scratch-resistant clear coats without risk of over-cutting.
-
DA and Rotary Ready
Optimised for both orbital and rotary polishers, so it fits your workflow regardless of the machine you prefer.
HC 2000 vs Generic Heavy-Cut
Not all cutting compounds are the same
Generic heavy-cut compounds often rely on fillers to make the paint look better than it is. Here's how HC 2000 stacks up against a typical budget alternative on the factors that matter at the correction stage.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Filler-free formulation | Yes | No |
| Silicone-free and body-shop safe | Yes | No |
| Homogeneous abrasive for consistent cut | Yes | No |
| Compatible with DA and rotary polishers | Yes | Yes |
| Safe on scratch-resistant clear coats | Yes | Yes |
| Requires a follow-up finishing step | Yes | Yes |
Body-Shop Safe Formula
Silicone-free. Solvent-free. Ready for any paint system.
HC 2000 is clean enough to use straight from the spray booth on fresh refinishes and tough enough to handle fully cured, scratch-resistant OEM clear coats. With no silicone or solvents in the mix, you can correct and move straight to sealing or coating without any compatibility concerns.
Reviews
What our customers say
4.0
Based on 1 reviews
Questions
Frequently asked
What machine polisher should I use with HC 2000?
HC 2000 is optimised for both dual-action (DA/orbital) and rotary polishers. For maximum cutting speed, a rotary paired with a wool or Zvizzer Red Thermo Pad is the go-to. On a DA, use a firm foam or wool pad and keep your speed at the higher end of the range for sufficient heat and abrasive action.
Which pad does Zvizzer recommend with HC 2000?
Zvizzer recommends their Red Thermo Pad or a wool pad for maximum cutting performance with HC 2000. These harder, more aggressive pads allow the abrasive particles to work at their full potential. Pair with a softer pad only if you want to reduce the cut slightly after the heavy correction stage.
What defects can HC 2000 remove?
HC 2000 is formulated to remove P2000-grit sanding marks, deep scratches, heavy swirl marks and significant paint imperfections. It is positioned as a heavy-cut compound in the Zvizzer system, so it handles the coarser correction stages before you step down to a medium or finishing compound.
Is HC 2000 safe on modern clear coats?
Yes. HC 2000 is compatible with both fresh and fully cured paint systems, including modern scratch-resistant clear coats commonly found on newer vehicles. The controlled abrasive technology prevents over-cutting, making it suitable for a wide range of OEM and refinish paint types.
Does HC 2000 contain fillers, silicone or solvents?
No. HC 2000 is a clean, filler-free, silicone-free and solvent-free formulation. What you see after wiping off the residue is the actual corrected paint surface - no hiding of defects with filling agents. This also makes it body-shop safe for use on freshly painted panels.
How do I apply HC 2000 correctly?
Apply a small amount of HC 2000 to your pad, then spread the product evenly over the work area at low machine speed. Increase the speed and work the compound with light pressure until it fully breaks down and becomes clear or nearly transparent. Wipe off residue with a clean microfibre cloth to reveal the corrected surface. Work in manageable sections to prevent the compound drying out prematurely.
Can I use HC 2000 before applying a ceramic coating or sealant?
Yes, but HC 2000 is a heavy-cut compound, so you will typically follow it with a finishing compound or polish to refine the surface before coating. Because it is filler-free, you won't have any masking agents interfering with ceramic adhesion. Just ensure all compound residue is fully removed and the paint is properly decontaminated before applying any coating.
What finish can I expect after using HC 2000?
HC 2000 removes heavy defects quickly and leaves a workable, glossy base, but it is a heavy-cut compound so you should follow it with a medium or fine finishing compound and/or polish to achieve a fully refined, swirl-free result ready for protection. The clean, filler-free formula means the finish you see is the true paint condition.