Metal Coating 50ml - ServFaces

R 1,250.00
Tax included. Shipping calculated at checkout.

Surface coating


The transparent and high-strength surface coating of the servFaces line is a diverse and unique quality product for a variety of metal surfaces such as copper, bronze, precious metals, non-ferrous metals, galvanized (zinc-plated) metals, stainless steel, ferrous metals and many more. It offers optimum protection for most diverse areas of application.


All-round talent for surface optimization

The highly-transparent coatings form a long-lasting protective layer resistant to scratches and dirt with minimum applied quantity. Hard-coated layers are suited especially to large-scale areas of application due to the low material consumption. Therefore, damage caused by resins, acids, salts, weather and mechanical impacts have no chance. Moreover, our high-strength hard-coated layers are exceptionally resistant to temperatures from +890° C to +1800°C (always according to the formulation). 

Fingerprints on stainless steel surfaces can be minimized by up to 90 % and removed with a wet cloth!


Nature Factor

Our goal is the development of high quality products that leave a positive long lasting impression, user friendly and safe to use and reduced impact on the environment. servFaces Metal Coating meets the requirements for food contacting articles and materials of the paragraphs 30 and 31 of the German Food, Article and Feed Law Book.

After curing, the coated surface does not pose any health risk and is allowed to get into contact with food.

This was confirmed by CBA GmbH with a certificate, that was issued on May 15, 2018. The complete certificate can be found in our shop under the tab Data sheets.


Areas of application:

  • Copper
  • Bronze
  • Precious metals
  • Non-ferrous metals
  • Galvanized (zinc-plated) metals
  • Stainless steel
  • Ferrous metals 
  • And many more 



  • Transparent, invisible, flexible and permanent long-lasting coating. 
  • Does not contain siloxane, fluorine, Teflon, wax, silicone or carcinogenic additives
  • UV and weather resistant
  • Saltwater-proof 
  • Anti-graffiti effects and protection from nearly all acids, bases and organic solvents
  • Resistant to temperatures from -50 °C to + 890 °C (briefly +1,090°C)
  • Resistant to chemicals (pH 2-13)
  • Non-flammable/non-corrosive
  • Increases hardness and scratch resistance, very high abrasion resistance
  • Corrosion protection up to 10 years or longer
  • Easy to clean
  • Reduces fingerprints by up to 90 %
  • Extends cleaning intervals and reduces cleaning and care costs


Technical explanations 

Metal Coating provides the following properties with a film thickness of 3 to 5 micrometers (film thickness depends on the application procedure).

  • Water-repellency of clean, empty, polished or painted surfaces (the surface must be free of silicone and grease. Suitable cleaning agents are servFaces Cleaner Ultima & Neutra).
  • Optimizing of the coated substrate's surface hardness. 
  • The coating has "self-healing" effects due to the unique manufacturing formulation (organic / inorganic components). No other coating system has this thermoelastic flow property. 
  • Even surfaces exposed to continuous stress of up to +1,050 °C can be successfully sealed thanks to the high proportion of inorganic matter. 

This is only a short list of what it can do.



The area to be treated should be clean and free of grease. The product can be applied on smooth surfaces with our applicator. You can remove any excess product with a microfiber cloth after a short reaction time of approx. 1 - 2 minutes. It is also optimal for use in a fine-spray pattern and rolling applications. To achieve the best results, the ambient temperature should be within the range of +5°C to +35°C. The product is dust-dry after 120 minutes. The product fully cures after approx. 6 - 8 days (depending on the temperature and air humidity). After curing, the coating is resistant to acids, alkaline solutions and solvents (pH 2 - 13).

Caution: Do not apply the product in direct sunlight and do not let it dry!



The lifetime is 2 to 10 years, always according to the substrate, surface stress and film thickness 



  • Protect the surface after the treatment from dirt and moisture, as well as finger grease for at least 18 - 24 hours.
  • Curing time can be shortened by approx. 2 - 3 days using separate drying. 
  • The surface must not be exposed to any abrasion during curing!


Application temperature: +5°C to +35°C 

Consumption: 3 to 5 ml per m²

Weatherproof: after 24 hours

Fully cured: at ambient temperature: after approx. 6 to 8 days

pH resistance: pH 2 - 13

Storage temperature: +10°C to +25°C 

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container

Caution: Protect the product from direct sunlight and freezing temperatures!



Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.


General information about the product:

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Product information

We use Payfast's secure payment portal for all our online payments.

Free Shipping on purchases over R1000.

Professional Detailing Products

Detailer South Africa

Detailer South Africa - Car Detailing at its best

Detailer South Africa is a leading supplier of professional car detailing products manufactured both locally and internationally. We offer a wide range of car care products, including:

  • Detailing Products: Detailer South Africa offers a comprehensive selection of detailing products to meet all your car care needs. From car shampoos and conditioners to polishes and waxes, we have everything you need to keep your car looking its best.
  • Car Polish: Looking to restore your car's shine? Detailer South Africa has a variety of car polishes to choose from, formulated to remove minor scratches and imperfections and leave your car with a brilliant finish.
  • Car Wax: Protect your car's paint and keep it looking showroom-fresh with a coat of high-quality car wax from Detailer South Africa. We offer a variety of waxes to suit different needs and preferences.
  • Car Wash Shampoos: Keep your car clean and streak-free with a car wash shampoo from Detailer South Africa. Our shampoos are formulated to gently remove dirt and grime without harming your car's paintwork.
  • Car Wash Accessories: In addition to car wash shampoos, Detailer South Africa also offers a variety of car wash accessories, such as wash mitts, buckets, and drying towels.

Detailer South Africa is committed to providing its customers with the highest quality car care products and exceptional customer service. Our knowledgeable staff is always happy to help you choose the right products for your car's needs.