Lake Country CCS Cutting Pad 3 Inch
R 225.00
- Patented CCS pockets control compound release
- Designed exclusively for DA and random orbital machines
- Reduces heat build-up during correction
- Prevents pad skipping on the working surface
- CCS pockets meter compound release throughout each pass
- Cuts swirls on a DA with less heat than standard foam
- Runs flat on the panel without pad skip
- Free shippingOn orders over R1000
- Fast delivery2-4 business days
- Safe paymentEncrypted checkout
Guaranteed safe checkout
- Visa
- Mastercard
- Apple Pay
- Google Pay
- Capitec
- Stitch
Frequently bought together
Total price R 10,352.00
CCS Technology
Compound where it counts - at the surface
Conventional foam pads absorb compound and lock most of it below the working face. The Lake Country CCS Cutting Pad's patented cell pattern holds product in reserve and releases it gradually, keeping fresh abrasive active throughout each section without re-loading the pad constantly.
Why CCS
Engineered for controlled correction
Four reasons detailers reach for CCS pads on the DA.
-
Metered Compound Release
CCS pockets feed abrasive to the surface gradually so your compound stays active longer per section.
-
Lower Friction Heat
Reduced surface contact means less heat build-up on sensitive or dark paintwork during correction.
-
No Pad Skipping
The pocket pattern reduces surface tension, letting the pad run flat and track smoothly across the panel.
-
Thin, Tapered Profile
Designed with an exact-fit backing plate interface for consistent pressure and classically optimised cut.
CCS vs Standard Foam
What separates CCS from a conventional cutting pad?
A standard smooth foam cutting pad does the job, but the CCS design addresses the specific problems that show up mid-correction: compound disappearing into the foam, heat build-up, and a pad that lifts off the panel. Here is how they compare on the things that matter during a correction session.
| Feature | DetailerSA | Alternative |
|---|---|---|
| Controlled compound release | Yes | No |
| Reduces pad skipping on flat panels | Yes | No |
| Lower heat generation during use | Yes | No |
| Cuts swirls and light scratches | Yes | Yes |
| Compatible with DA / random orbital | Yes | Yes |
| Suitable for rotary polishers | No | Yes |
Built for DA Machines
Runs flat, runs cool, runs consistent
The tapered profile and exact-fit backing plate interface keep the pad seated squarely on the panel, while the CCS pockets reduce surface tension so it tracks without skipping. Less contact area means less friction heat, which matters when you are working through a full correction on a vehicle with thin or dark paint.
Reviews
What our customers say
No reviews yet. Be the first to review this product.
Questions
Frequently asked
Which machines is this pad compatible with?
The Lake Country CCS Cutting Pad is designed exclusively for DA (dual-action) and random orbital polishers. It is not intended for rotary use, where the different motion and heat profile would not suit the CCS foam cell design.
What backing plate size does the 3-inch pad require?
This pad measures 3.5 inches x 0.875 inches and is built to fit a 3-inch backing plate. Using the correct backing plate size ensures the tapered edge works as intended and gives you the best contact patch on the panel.
How much compound should I prime the pad with before starting?
Because the CCS pockets control absorption, you need less product than you would with a conventional foam pad. A light prime of three to four pea-sized dots spread across the face before the first section is typically enough. From there, apply compound directly to the panel rather than loading the pad heavily.
What is the benefit of the CCS pocket design over a standard smooth foam pad?
Standard foam absorbs compound quickly, trapping most of it below the working surface where it cannot cut. The CCS pockets hold product in reserve and release it gradually as you work, so the abrasive stays active at the surface for longer. You get a more consistent cut per pass and waste less compound overall.
Does the CCS design help with heat management?
Yes. The pockets reduce the total surface area in contact with the paint at any given moment, which lowers friction and the heat that comes with it. This is particularly useful on thin or heat-sensitive single-stage paintwork where a conventional cutting pad on a DA can still introduce marring if the panel gets too warm.
What polishes or compounds pair well with this cutting pad?
This is a cutting pad, so it is best matched with a medium to heavy cutting compound for the correction stage. Once you have achieved the desired level of defect removal, follow up with a finishing pad and a light polish or one-step to refine the surface back to gloss before any sealant or ceramic application.
Can I use this pad on bare or wrapped paint, PPF, or other surfaces?
The CCS Cutting Pad is designed for painted surfaces used with a DA polisher. Avoid using it on PPF or vinyl wraps unless your compound is specifically formulated for those films. It is also not suitable for glass correction, where dedicated glass pads and compounds are the correct choice.
How do I clean and maintain the pad after use?
Rinse the pad under warm running water immediately after use, working the foam gently with your fingers to release trapped compound. A dedicated pad cleaning brush or pad washer attachment on your DA speeds the process. Allow the pad to air dry fully before storing or reusing. Avoid high-heat drying, which can break down the foam cells over time.